• 대한안전경영과학회지
• /
• 제14권4호
• /
• pp.107-116
• /
• 2012

The issues raised so far in the development of safety-critical systems have centered on how effectively the safety requirements are met in systems design. The systems are becoming more complex due to the increasing demand on the functionality and performance. As such, the integration of both the systems design and systems safety processes becomes more important and at the same time quite difficult to carry out. In this paper, an approach to solving the problem is presented, which is based on an integrated data model. To do so, the data generated from the inputs and outputs of the systems design and systems safety processes are analyzed first. The results of analysis are used to extract common attributes among the data, thereby making it possible to define classes. The classes then become the cores of the interface data model through which the interaction between the two processes under study can be modeled and interpreted. The approach taken has also been applied in a design case to demonstrate its value. It is expected that the results of the study could play a role of the stepping stone in extending to the architecture development of the integrated process.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.167-167
• /
• 2020

Annual sediment deposition in reservoirs behind weirs poses flood risk, while its accurate prediction remains a challenge. Sediment management by hydraulic flushing is an effective method to maintain reservoir storage. In this study, an integrated approach to predict sediment inflow and sediment flushing simulation in reservoirs is presented. The annual sediment inflow prediction was carried out with Artificial Neural Networks (ANN) modelling. RESCON model was applied for quantification of sediment flushing feasibility criteria. The integrated approach was applied on Sangju Weir and also on estuary of Nakdong River (NREB). The mean annual sediment inflow predicted at Sangju Weir and NREB was 400,000 ㎥ and 170,000 ㎥, respectively. The sediment characteristics gathered were used to setup RESCON model and sediment balance ratio (SBR) and long term capacity ratio (LTCR) were used as flushing efficiency indicators. For Sangju Weir, the flushing discharge, Q_f = 140 ㎥/s with a drawdown of 5 m, and flushing duration, T_f = 10 days was necessary for efficient flushing. At NREB site, the parameters for efficient flushing were Q_f = 80 ㎥/s, T_f = 5 days, N = 1, El_f = 2.24 m. The hydraulic flushing was concluded feasible for sediment management at both Sangju Weir and NREB.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.7-14
• /
• 2016

Unlike most researches that focus on single manufacturer or single buyer, this research studies the cooperation policy for two participants of supply chain such as single vendor and single buyer. Especially, this paper deals with single vendor-single buyer integrated-production inventory problem. If the buyer orders products, then the vendor will start to make products and then the products will be shipped from the vendor to the buyer many times. The buyer is supposed to order again when the buyer's inventory level hits reorder point during the last shipment and this cycle keeps repeated. The buyer uses continuous review inventory policy and customer's demand is assumed to be probabilistic. The contribution of this paper is to present a mixed approach and derive its cost function. The existing policy assumes that the size of shipping batch from single vendor to single buyer is increasing, called Type 1, or constant, called Type 2. In mixed approach, the size of shipping batch is increasing at the beginning part of the cycle, and then its size is constant at the ending part of the cycle. The number of shipping for Type 1 and Type 2 in a cycle in mixed approach is determined to minimize total cost. The relationship between parameters, for example, the holding cost per product, the set up cost per order, and the shortage cost per item and decision variables such as order quantity, safety factor, the number of shipments, and shipment increasing factor is figured out via sensitivity analysis. Finally, it is statistically proved that the mixed approach is superior to the existing approaches.

• Journal of Power Electronics
• /
• 제13권2호
• /
• pp.256-263
• /
• 2013

This paper presents an IHQRR (Integrated High Quality Rectifier Regulator) BIFRED (Boost Integrated Flyback Rectifier Energy Storage DC-DC) converter fed BLDC (Brushless DC) motor drive. A reduced sensor topology is derived by utilizing a BIFRED converter to operate in a dual DCM (Discontinuous Conduction Mode) thus utilizing a voltage follower approach for the PFC (Power Factor Correction) and voltage control. A new approach for speed control is proposed using a single voltage sensor. The speed of the BLDC motor drive is controlled by varying the DC link voltage of the front end converter. Moreover, fundamental frequency switching of the VSI's (Voltage Source Inverter) switches is used for the electronic commutation of the BLDC motor which reduces the switching losses in the VSI. The proposed drive is designed for a wide range of speed control with an improved power quality at the AC mains which falls within the recommended limits imposed by international power quality standards such as IEC 61000-3-2.

• 제어로봇시스템학회논문지
• /
• 제9권4호
• /
• pp.320-328
• /
• 2003

This paper proposes a new nonlinear adaptive guidance law. Fourth order state equation for integrated guidance and control loop is formulated considering target uncertainties and control loop dynamics. The state equation is further changed into the normal form by nonlinear coordinate transformation. An adaptive nonlinear guidance law is proposed to compensate for the uncertainties In both target acceleration and control loop dynamics. The proposed law adopts the sliding mode control approach with adaptation fer unknown bound of uncertainties. The present approach can effectively solve the existing guidance problem of target maneuver and the limited performance of control loop. We provide the stability analyses and demonstrate the effectiveness of our scheme through simulations.

• 산업공학
• /
• 제13권3호
• /
• pp.512-520
• /
• 2000

An integrated process planning and scheduling model considering outsourcing in manufacturing supply chain is proposed in this paper. The process planning and scheduling considering outsourcing are actually interrelated and should be solved simultaneously. The proposed model considers the alternative process plans for job types, precedence constraints of job operations, due date of production, transportation time and production information for outsourcing. The integrated states include:(1) Operations sequencing, (2) Machine selection, (3) Scheduling with outsourcing under the due date. To solve the model, a heuristic approach based on genetic algorithm(GA) is developed. The proposed approach minimizes the makespan considering outsourcing and shows the best operation-sequences and schedule of all jobs.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.147-149
• /
• 2001

Customer centered supply chain Management is becoming a very important issue for manufacturing and distribution company. Increasingly, leading companies improve their competitiveness by shorting the time to delivery from warehousing to delivering, increasing the level of customer service. They also do their best to collaborate with suppliers and customers based on the information sharing. This case introduces a integrated approach to develop a logistics automation and information system for the spare parts distribution center of L electronics. We pursue to optimize the supply chain by implementing intelligent logistics system which has the capabilities of responding to the changes in market demands. This would provide many implications to the clients in solving logistics problems and secure superior competitiveness.

• 한국경영과학회지
• /
• 제24권4호
• /
• pp.63-80
• /
• 1999

In the container transportation of inland depots the empty container is an important issue. The truck dispatching problem in this paper is considered under restriction about empty containers. When a full container arrives in a depot by truck, after unloading operation the full container is changed to an empty container. After loading operation an empty container is changed to a full container. We suggest an integrated approach to the problem of simultaneously managing empty truck and container movements. We suggest an integrated approach to the problem of simultaneously managing empty truck and container movements. We would like to find the truck dispatching method minimizing empty truck movements and empty container movements. In this paper, a mixed integer programming model is developed to obtain the optimal truck dispatching in container transportation and heuristic is developed to give a good solution in much shorter time. The numerical examples are studied and the proposed heuristic is also compared with the result of numerical examples.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.16-19
• /
• 2007

At an integrated steel mill, raw materials such as coal and iron ore are discharged by ships through multiple unloaders. The discharged raw material is then transported to storage yards through multiple routes established simultaneously on a fairly complicated belt conveyer network. Formulating an efficient unloading schedule is a quite cumbersome task due to the insufficient number of berths and unloaders as well as the potential conflict among routes being used simultaneously. In this paper, we propose a solution approach to the scheduling problem and describe the prototype system that we built as an implementation of our approach.

• 품질경영학회지
• /
• 제30권3호
• /
• pp.139-149
• /
• 2002

A successful product development process can not be achieved without a proper focus and prioritization. For this research, the priority is defined as the relative urgency of a system compared to other system in order to develop and launch a successful product. The process of integrated approach for prioritization using ID and Goal Programming is developed. The development of a mid-size car by an internationally reputed automotive company is described as a case study.