• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.4
• /
• pp.360-374
• /
• 2016

The present paper studies the ultimate torsional strength of stiffened box girders with large deck opening due to the influence of cracks. Three types of hull girders with different spans are provided for comparison. Potential parameters which may have effects on the torsional strength including the mesh refinement, initial deflection, material strain hardening, geometric properties of crack and stiffener are discussed. Two new concepts that play an significant role in the ultimate strength research of damaged box girders are introduced, one of which is the effective residual section (ERS), the other is the initial damage of the failure zone (IDFZ) for intact structures. New simple formulas for predicting the residual ultimate torsional strength of cracked stiffened box girders are derived on the basis of the two new concepts.

• Applied Science and Convergence Technology
• /
• v.23 no.2
• /
• pp.97-102
• /
• 2014

A vacuum chamber for a commercial atomic force microscope (AFM) is designed and fabricated. Only minimal modifications were made to an existing microscope in an effort to work in a vacuum environment, while most of the available AFM functionalities were kept intact. The optical alignment needed for proper AFM operations including a SLD (superluminescent diode) and a photodiode can be made externally without breaking the vacuum. A vacuum level of $5{\times}10^{-3}$ torr was achieved with a mechanical pump. An enhancement of the quality factor was observed along with a shift in the resonance frequency of a non-contact-mode cantilever in a vacuum. Topographical data of a calibration sample were also obtained in air and in a low vacuum using the non-contact mode and the results were compared.

• International Journal of Oral Biology
• /
• v.47 no.2
• /
• pp.17-24
• /
• 2022

Preserving intact genetic material and delivering it to the next generation are the most significant tasks of living organisms. The integrity of DNA sequences is under constant threat from endogenous and exogenous factors. The accumulation of damaged or incompletely-repaired DNA can cause serious problems in cells, including cell death or cancer development. Various DNA damage detection systems and repair mechanisms have evolved at the cellular level. Although the mechanisms of these responses have been extensively studied, the global RNA expression profiles associated with genomic instability are not well-known. To detect global gene expression changes under different DNA damage and hypoxic conditions, we performed RNA-seq after treating human cervical cancer cells with ionizing radiation (IR), hydroxyurea, mitomycin C (MMC), or 1% O₂ (hypoxia). Results showed that the expression of 184-1037 genes was altered by each stimulus. We found that the expression of 51 genes changed under IR, MMC, and hypoxia. These findings revealed damage-specific genes that varied differently according to each stimulus and common genes that are universally altered in genetic instability.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.6
• /
• pp.680-688
• /
• 2018

Objective : To mitigate the risk of iatrogenic instability, new posterior decompression techniques able to preserve musculoskeletal structures have been introduced but never extensively investigated from a biomechanical point of view. This study was aimed to investigate the impact on spinal flexibility caused by a unilateral laminotomy for bilateral decompression, in comparison to the intact condition and a laminectomy with preservation of a bony bridge at the vertebral arch. Secondary aims were to investigate the biomechanical effects of two-level decompression and the quantification of the restoration of stability after posterior fixation. Methods : A universal spine tester was used to measure the flexibility of six L2-L5 human spine specimens in intact conditions and after decompression and fixation surgeries. An incremental damage protocol was applied : 1) unilateral laminotomy for bilateral decompression at L3-L4; 2) on three specimens, the unilateral laminotomy was extended to L4-L5; 3) laminectomy with preservation of a bony bridge at the vertebral arch (at L3-L4 in the first three specimens and at L4-L5 in the rest); and 4) pedicle screw fixation at the involved levels. Results : Unilateral laminotomy for bilateral decompression had a minor influence on the lumbar flexibility. In flexion-extension, the median range of motion increased by 8%. The bone-preserving laminectomy did not cause major changes in spinal flexibility. Two-level decompression approximately induced a twofold destabilization compared to the single-level treatment, with greater effect on the lower level. Posterior fixation reduced the flexibility to values lower than in the intact conditions in all cases. Conclusion : In vitro testing of human lumbar specimens revealed that unilateral laminotomy for bilateral decompression and bone-preserving laminectomy induced a minor destabilization at the operated level. In absence of other pathological factors (e.g., clinical instability, spondylolisthesis), both techniques appear to be safe from a biomechanical point of view.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.30-30
• /
• 2001

The culture of preantral follicles has important biotechnological implications through its potential to produce the large quantity of oocytes for embryo production, transgenesis research, conservation of rare breed, and a potential source of ovarian genetic material. The present study was conducted to establish the optimal conditions of in vitro culture for intact bovine preantral follicles; and to examine the developmental ability of oocytes derived from the in vitro-grown preantral follicles; and to investigate the effects of various concentrations of FSH and LH on these processes. Bovine preantral follicles (150 $\pm$ 1.2${\mu}{\textrm}{m}$), surrounded by theca cell, were isolated enzymetically and mechanically from ovarian cortical slides in Leibovitz L-15 medium containing 1 mg/$m\ell$ collagens and 0.2 mg/$m\ell$ DNase I and cultured for 25 days in the presence of different concentrations of bovine FSH and LH in $\alpha$MEM medium with insulin, transferrin, and selenite. The survival was tested by frypan Blue and Hematoxylin. The survival and growth rates of follicles were higher in FSH treatment groups than these in control (P<0.001), but there were no significant differences between the LH treatment groups and the control. In 25 days, the survival and growth rates of follicles in FSH and LH treatment group (50%, 300$\pm$1.0${\mu}{\textrm}{m}$) were higher than in FSH treatment group (40%, 244$\pm$0.5${\mu}{\textrm}{m}$) and the control group (25%, 160$\pm$ 1.0${\mu}{\textrm}{m}$). Fifty-five percent of healthy antral follicles were obtained, and 60% of the oocytes complete meiotic maturation to the metaphase II stage. Twenty-two percent of the mature oocytes underwent cleavage, and 9% developed to the blastocyst stage. In this study, in vitro-grown oocytes (111 $\pm$ $1.5mutextrm{m}$), under our culture conditions, were not equivalent in size to the in vivo-grown oocytes (130$\pm$1.3${\mu}{\textrm}{m}$). Therefore, these results suggest that bovine preantral follicles with intact theca cell can grow to the antral stage in 25days, and that oocytes from those follicles can acquire the meiotic competence and normally undergo fertilization and development to the blastocyst stage. However, the developmental capacity of in vitro-grown oocytes is presumably not comparable to those of the in vivo counterparts.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.180-187
• /
• 2001

The structure of current guides is largely illogical and without any rational use of color ordering. The shade guides are generally made of plastic (rather than the actual composite material) and do not accurately depict the true shade. translucency. or opacity of the composite resin after polymerization. To solve this problem, information based on evaluations of natural teeth and material that use the same method and experimental conditions is necessary. The present investigation measured the color of natural maxillary anterior teeth in vivo and compared the results with those of composite resins. 269 Korean subjects were selected for this study. Intact central incisor. lateral incisor. and canine were selected. The clinical crowns were free of caries or restorations. The middle site of the coronal portion on the labial surface of the tooth was measured by Chroma Meter. The five light activated. resin-based materials (Amelogen, Denfil, Elitefil, Spectrum, Z100) were used in this study. Resin composite was condensed into plastic mold with a diameter of 8mm and a thickness of 4mm. pressed between glass plates to flatten the surfaces. and polymerized using a Visilux II visible light activation unit. The surfaces were polished sequentially on wet sandpaper. Color measurements of each specimen were accomplished by Chroma Meter. A computer program that compares each tooth color with each composite resin color was written and the minimum CIELAB color difference ($\Delta$E$^*$) between tooth and each material was calculated. Under the conditions of this study: 1. Teeth tend to become darker with advancing age. 2. Canines were darker. more yellow. and less green than incisors. 3. The teeth from the women were lighter. more green. and less yellow than the male teeth. 4. In general. composite resins were lighter. more green. and less yellow than teeth. Deficiencies were noted in Hues in YR range. 5. Mean color differences between the five composite resin products and teeth were detectable to the naked eye($\Delta$E$^*$>1.0). 6. In comparing the mean $\Delta$E$^*$ values of materials. Spectrum showed the least followed by Z100, Elitefil, Amelogen, Denfil in increasing order.

• Journal of Ginseng Research
• /
• v.34 no.3
• /
• pp.227-236
• /
• 2010

The objective of this study was to evaluate the potential use of ginseng leaf as a cosmetic material. In this research, we employed enzymatic treated ginseng leaf by using Ultraflo L to improve the recovery of ginsenosides from the ginseng leaf and studied the biological activities and skin safety of the enzymatic treated ginseng leaf for use as a cosmetic material. The total ginsenoside contents of the non-enzymatic treated ginseng leaf (NEGL) and Ultraflo L treated ginseng leaf (UTGL) were 271 and 406 mg/g, respectively. The level of metabolite ginsenosides (sum of Rg2, Rg3, Rg5, Rk1, compound K, Rh1, Rh2, and F2) was higher in UTGL (93.1 mg) compared to NEGL (62.4 mg) in one gram ginseng leaf extract. The increase in amounts of ginsenoside types in UTGL compared to NEGL was generally 140% to 157%. UTGL exhibited relatively higher 2,2-diphenyl-2-picrylhydrazyl hydrate ($IC_{50}$, 2.8 mg/mL) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt ($IC_{50}$, 1.6 mg/mL) radical scavenging activities compared to NEGL (4.8 mg/mL and 2.2 mg/mL). The UTGL group showed normalized hydrogen peroxide, lipid peroxidation and visual wrinkling grade induced-UVB exposure. The UTGL did not induce any adverse reactions such as erythema and edema on intact skin sites; however, some guinea pigs treated with UTGL on abraded skin sites showed very slight erythema. The primary irritation index (PII) score of UTGL was 0.05 and it was classified as a practically non-irritating material (PII, 0 to 0.5). In skin sensitization tests with guinea pigs, UTGL had a positive rate of skin sensitization at 40%, and the mean evaluation score was 0.4.

• Steel and Composite Structures
• /
• v.29 no.4
• /
• pp.527-544
• /
• 2018

The paper presents the study on a change in modal parameters and structural stiffness of cable-stayed Fiberline Bridge made entirely of Glass Fiber Reinforced Polymer (GFRP) composite used for 20 years in the fjord area of Kolding, Denmark. Due to this specific location the bridge structure was subjected to natural aging in harsh environmental conditions. The flexural properties of the pultruded GFRP profiles acquired from the analyzed footbridge in 1997 and 2012 were determined through three-point bending tests. It was found that the Young's modulus increased by approximately 9%. Moreover, the influence of the temperature on the storage and loss modulus of GFRP material acquired from the Fiberline Bridge was studied by the dynamic mechanical analysis. The good thermal stability in potential real temperatures was found. The natural vibration frequencies and mode shapes of the bridge for its original state were evaluated through the application of the Finite Element (FE) method. The initial FE model was created using the real geometrical and material data obtained from both the design data and flexural test results performed in 1997 for the intact composite GFRP material. Full scale experimental investigations of the free-decay response under human jumping for the experimental state were carried out applying accelerometers. Seven natural frequencies, corresponding mode shapes and damping ratios were identified. The numerical and experimental results were compared. Based on the difference in the fundamental natural frequency it was again confirmed that the structural stiffness of the bridge increased by about 9% after 20 years of service life. Data collected from this study were used to validate the assumed FE model. It can be concluded that the updated FE model accurately reproduces the dynamic behavior of the bridge and can be used as a proper baseline model for the long-term monitoring to evaluate the overall structural response under service loads. The obtained results provided a relevant data for the structural health monitoring of all-GFRP bridge.

• Restorative Dentistry and Endodontics
• /
• v.43 no.4
• /
• pp.36.1-36.12
• /
• 2018

Objectives: Direct pulp capping is a treatment for mechanically exposed pulp in which a biocompatible capping material is used to preserve pulpal vitality. Biocompatibility tests in animal studies have used a variety of experimental protocols, particularly with regard to the exposure site. In this study, pulp exposure on the occlusal and mesial surfaces of molar teeth was investigated in a rat model. Materials and Methods: A total of 58 maxillary first molars of Wistar rats were used. Forty molars were mechanically exposed and randomly assigned according to 3 factors: 1) the exposure site (occlusal or mesial), 2) the pulp-capping material (ProRoot White MTA or Bio-MA), and 3) 2 follow-up periods (1 day or 7 days) (n = 5 each). The pulp of 6 intact molars served as negative controls. The pulp of 12 molars was exposed without a capping material (n = 3 per exposure site for each period) and served as positive controls. Inflammatory cell infiltration and reparative dentin formation were histologically evaluated at 1 and 7 days using grading scores. Results: At 1 day, localized mild inflammation was detected in most teeth in all experimental groups. At 7 days, continuous/discontinuous calcified bridges were formed at exposure sites with no or few inflammatory cells. No significant differences in pulpal response according to the exposure site or calcium-silicate cement were observed. Conclusions: The location of the exposure site had no effect on rat pulpal healing. However, mesial exposures could be performed easily, with more consistent results. The pulpal responses were not significantly different between the 2 capping materials.

• Molecules and Cells
• /
• v.44 no.8
• /
• pp.602-612
• /
• 2021

DNA methylation is an important epigenetic mechanism affecting genome structure, gene regulation, and the silencing of transposable elements. Cell- and tissue-specific methylation patterns are critical for differentiation and development in eukaryotes. Dynamic spatiotemporal methylation data in these cells or tissues is, therefore, of great interest. However, the construction of bisulfite sequencing libraries can be challenging if the starting material is limited or the genome size is small, such as in Arabidopsis. Here, we describe detailed methods for the purification of Arabidopsis embryos at all stages, and the construction of comprehensive bisulfite libraries from small quantities of input. We constructed bisulfite libraries by releasing embryos from intact seeds, using a different approach for each developmental stage, and manually picking single-embryo with microcapillaries. From these libraries, reliable Arabidopsis methylome data were collected allowing, on average, 11-fold coverage of the genome using as few as five globular, heart, and torpedo embryos as raw input material without the need for DNA purification step. On the other hand, purified DNA from as few as eight bending torpedo embryos or a single mature embryo is sufficient for library construction when RNase A is treated before DNA extraction. This method can be broadly applied to cells from different tissues or cells from other model organisms. Methylome construction can be achieved using a minimal amount of input material using our method; thereby, it has the potential to increase our understanding of dynamic spatiotemporal methylation patterns in model organisms.