• Ocean and Polar Research
• /
• v.21 no.2
• /
• pp.117-126
• /
• 1999

To meet increasing needs for environmentally sustainable management of coastal area, there has been compelling pressure to establish a cost-effective and long-term coastal water quality (CWQ) monitoring system. A remote CWQ monitoring system, STAMP, has been developed and is in operation along the route between Kyema harbor and Anma Island in the southwestern coastal area of Korea. STAMP uses a PCS phone as a telemetry unit to transmit acquired data for monitoring general water quality parameters, and a routinely operating coastal passenger ship or car ferry. STAMP has various merits of low-cost operations; long-term monitoring with secure instrumentation; and stable real-time telemetry of acquired data with-out the loss and noise. It is expected that the system will serve as a very useful tool in the CWQ managing programs of Korea taking the advantage of many coastal passenger ships in various routes including the ships departing from the coastal industrial cities. The acquired data compiled on suspended surface sediment concentrations (SSSC) will be also valuably helpful in understanding the sediment budget across the routes of the vessel.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.723-730
• /
• 2019

Acquiring instrumentation signals generated from nuclear power plants (NPPs) is essential to maintain nuclear reactor integrity or to mitigate an abnormal state under normal operating conditions or severe accident circumstances. However, various safety-critical instrumentation signals from NPPs cannot be accurately measured on account of instrument degradation or failure under severe accident circumstances. Reactor vessel (RV) water level, which is an accident monitoring variable directly related to reactor cooling and prevention of core exposure, was predicted by applying a few signals to deep neural networks (DNNs) during severe accidents in NPPs. Signal data were obtained by simulating the postulated loss-of-coolant accidents at hot- and cold-legs, and steam generator tube rupture using modular accident analysis program code as actual NPP accidents rarely happen. To optimize the DNN model for RV water level prediction, a genetic algorithm was used to select the numbers of hidden layers and nodes. The proposed DNN model had a small root mean square error for RV water level prediction, and performed better than the cascaded fuzzy neural network model of the previous study. Consequently, the DNN model is considered to perform well enough to provide supporting information on the RV water level to operators.

• Journal of Industrial Technology
• /
• v.42 no.1
• /
• pp.13-18
• /
• 2022

Diabetes mellitus is an abnormally high glucose level in the bloodstream. Several pharmaceuticals are administered to diabetic patients to control their glucose levels. Early diagnosis and proper glycemic management are essential in this situation to prevent further progression and complications. Biosensor-based detection has progressed and shown potential in portable and inexpensive daily assessment of glucose levels because of its simplicity, low cost, and convenient operation without sophisticated instrumentation. This review discusses various systemic aspects of non-invasive glucose monitoring, including materials for monitoring and managing diabetes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.912-916
• /
• 2004

The home network is the technique to guarantee a safe, economical, socially integrated, and healthy life to the family and it provides domestic safety, instrument control, controllable energy and health monitoring by the connection of the home appliances using wired and wireless networks. A home control system has been developed for managing and controlling home appliances. This paper designs the broadband PLC home controller using broadband PLC technology which can save much cost at a network infrastructure using the existing power line at a home and design the USB home controller using USB technology which is low cost and has many goods with it. And the embedded home server manages those. The CDMA module provides mobile functions to the home control system in this paper. And we choose the OSGi specification which is compatible with other home middleware and can accept various communication techniques of home network

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.10-14
• /
• 2006

FBG sensors are able to measure the strain of structures more easily and durable than electronic resistance gages and thus many researches are on the way to apply the FBG sensor for response monitering of infrastructures. This study investigates the deflection estimation technique using FBG sensors. Several FBG sensors are multiplexed in single optical fiber and installed. in parallel pairs along the length of the structure. The measured strains at the top and bottom of a cross section can be transferred to the curvature of the section which can be used to calculate its displacement. It has been demonstrated that the estimated deflections using the FBG sensor are compared well with the readings from displacement transducers. The results show that the proposed instrumentation technique is capable of estimating the vertical deflection of the structures for various loading conditions including impact and dynamic loads, which is crucial in the structural health monitoring.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.867-876
• /
• 2019

Second harmonic generation using nonlinear ultrasonic waves have been shown to be an early indicator of possible fatigue damage in nuclear power plant components. This technique relies on measuring amplitudes, making it highly susceptible to variations in transducer coupling and instrumentation. This paper proposes an experimental procedure for in-situ surface wave nonlinear ultrasound measurements on specimen with permanently mounted transducers under high cycle fatigue loading without interrupting the experiment. It allows continuous monitoring and minimizes variation due to transducer coupling. Moreover, relations describing the effects of the measurement system nonlinearity including the effects of the material transfer function on the measured nonlinearity parameter are derived. An in-situ high cycle fatigue test was conducted using two 304 stainless steel specimens with two different excitation frequencies. A comprehensive analysis of the nonlinear sources, which result in variations in the measured nonlinearity parameters, was performed and the effects of the system nonlinearities are explained and identified. In both specimens, monotonic trend was observed in nonlinear parameter when the value of fundamental amplitude was not changing.

• Journal of the Korean Professional Engineers Association
• /
• v.43 no.2
• /
• pp.45-52
• /
• 2010

At the end of last year, Korean nuclear power plants, APR-1400 and a research reactor have been contracted to build plants at United Arab Emirates and Jordan. Since 1959, a historical background of nuclear technologies in Korea is summarized. The safety requirements for Instrumentation and Control (I&C) systems in Nuclear Power Plants (NPP) are discussed. Specific descriptions on the typical safety classification of I&C systems, the definitions of the electrical class 1E and the countermeasures against common caused failures are provided. And summaries of typical I&C systems such as the protection systems, the control systems, the instrumentations, the monitoring systems and a control room in NPP are introduced. Strict requirements on the development of the digital computer systems in nuclear applications are described.

• Journal of Semiconductor Engineering
• /
• v.1 no.3
• /
• pp.81-87
• /
• 2020

An instrumentation amplifier (IA) and an analog-to-digital converter (ADC) are essential circuit blocks for accurate and robust sensor readout systems. This paper introduces recent advances in radiation-hardening by design (RHBD) techniques applied for the sensor readout integrated circuits (IC), e.g., the three-op-amp IA and the successive-approximation register (SAR) ADC, operating against total ionizing dose (TID) and singe event effect (SEE) in harsh radiation environments. The radiation-hardened IA utilized TID monitoring and adaptive reference control to compensate for transistor parameter variations due to radiation effects. The radiation-hardened SAR ADC adopts delay-based double-feedback flip-flops to prevent soft errors which flips the data bits. Radiation-hardened IA and ADC were verified through compact model simulation, and fabricated CMOS chips were measured in radiation facilities to confirm their radiation tolerance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.121-130
• /
• 2008

Recently, we can see an increasing amount of dam damage or failure due to aging, earthquakes occurrence and unusual changes in weather. For this reason, dam safety is gaining more importance than ever before in terms of disaster management at a national level. Therefore, the government is trying to come up with an array of legal actions to secure consistent dam safety. Other dam management organizations are also taking various institutional and technical measures for the same purpose. In this study, Dam Safety Management System, KDSMS, has developed for consistent and efficient dam safety management. The KDSMS consists of dam and reservoir data, a hydrological information system, a field inspection and data management system, a instrumentation and monitoring system including earthquake monitoring, a field investigation and safety evaluation system, and a collective information system. The KDSMS is a kind of enterprise management system which has been developed to deal with safety management of each field, research center, and headquarter office and their correlation as well as detailed safety information management.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.125-132
• /
• 2010

IEC61162-3 known as NMEA2000 protocol is approved as a standard network of SOLAS ship by ISO and used for the instrument network which exchanges data in real-time. For easy the development of ship network equipments, this study is focused on the development of SoC which can convert to NMEA2000 protocol from various kind of protocols such as TCP/IP, NMEA0183, RS422 and others using FPGA and u-Blaze. In this paper, we composed NMEA2000 protocol stack on FPGA and verified NMEA2000 network communication of FPGA system by connecting with commercialized devices through PC Hyper-terminal and network monitoring program.