• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.284-292
• /
• 2019

To evaluate the usefulness of pediatric chest CT scans by comparing the dose, examination time, and image quality by applying Helical mode, High-pitch mode, and Volume Axial mode to minimize the radiation exposure and obtain high diagnostic value. Revolution (GE Healthcare, Wisconsin USA) was used to divide PBU-70 phantom into Helical mode, High-pitch mode, and Volume Axial mode. After acquiring images, ROI is set for each image, heart, bone, lung, and back-ground air, and the average value is obtained by measuring CT number (HU) and noise (SD). SNR and CNR were measured and compared with DLP values provided directly by the equipment. Determining statistical significance Statistical analysis was performed using ONE-WAY-ANAOVA using SPSS 21.0. In this experiment, it was possible to inspect at a short time without deterioration of image quality with the lowest dose when using volume axial mode. Although the detector coverage of 16 cm is limited to all pediatric chest CT scans, it is recommended to be actively used in pediatric patients, and further study is needed to apply other test sites in volume axial mode.

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.40-45
• /
• 2019

This paper is a purpose to study the failure example for heavy-duty vehicle fire. The first example, the researcher found the engine over-heating phenomenon causing a coolant leakage by the sealing poor of head-gasket because of D-ring part deformation contacting with cylinder liner top-part and cylinder head. He certified a fire breakout by short transferred to surrounding wiring of air-cleaner. The second example, a brake lining by return fault of break operating S cam causing with much wear of a rear 4 wheel brake lining repeatably was worn by friction. In the long run, it became the cause of fire. The third example, the researcher knew the fire cause was came about the short of wire by overload of tilting motor when the driver tilted up the cap to inspect a engine. Therefore, a heavy-duty fire must minimize the fire occurrence by thorough controlling.

• The Journal of Internal Korean Medicine
• /
• v.40 no.3
• /
• pp.390-408
• /
• 2019

Objectives: Several pattern diagnosis questionnaires have been developed to objectify the process of pattern diagnosis in Korean medicine. In this context, this study aimed to develop a food retention questionnaire for functional dyspepsia (FRQ-FD) by modifying the previously developed food retention questionnaire (FRQ) and to verify its reliability and validity. Furthermore, this study aimed to identify the optimal cut-off value of the FRQ-FD for standardization and use in clinical situations. Methods: To develop the FRQ-FD, we extracted the major symptoms of food retention pattern for functional dyspepsia from Chinese/Korean medicine textbooks and requested an importance survey from experts using the Delphi method. The first draft of the FRQ-FD was composed of 25 questions comprising 8 questions from the textbooks and the Delphi method and 17 questions from the FRQ already developed in 2013. To analyze its reliability, validity, and optimal cut-off value, 60 subjects were enrolled in this study from June 25 to August 13, 2018. Thirty patients were diagnosed as both functional dyspepsia and food retention pattern, and 30 healthy participants were not. All participants were requested to fill up the FRQ-FD, Stomach Qi Deficiency Questionnaire (SQDQ), Scale for Stomach Qi Deficiency pattern (SSQD), visual analog scale (VAS) for dyspepsia, Nepean Dyspepsia Index-Korean version (NDI-K), and functional dyspepsia-related quality of life (FD-QoL). Results: No statistically significant differences were found in sex distribution, age, and body mass index between the patient group and the control group. As five questions affected the reliability negatively and three questions affected the clinical validity negatively, we decided to exclude the eight questions upon further investigation. The Cronbach's ${\alpha}$ coefficient of the revised FRQ-FD (17 items) was 0.899, and its clinical validity was verified. Construct validity was analyzed by factor analysis and produced five factors. Statistically significant positive correlations were found between the revised FRQ-FD and the other dyspepsia scales, namely, SQDQ, SSQD, VAS, NDI-K, and FD-QoL. VAS and NDI-K especially had strong positive correlations with FRQ-FD. Conclusions: The FRQ-FD developed in this study can provide fundamental reliability and validity for a pattern diagnosis questionnaire. FRQ-FD can help to diagnose food retention pattern in functional dyspepsia patients. Further studies are required to inspect several statistical factors.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.1
• /
• pp.151-157
• /
• 2019

This study is about the process capability index (PCI). In this study, we introduce several indices including the index $C_{PR}$ and present the characteristics of the $C_{PR}$ as well as its validity. The difference between the other indices and the $C_{PR}$ is the way we use to estimate the standard deviation. Calculating the index, most indices use sample standard deviation while the index $C_{PR}$ uses range R. The sample standard deviation is generally a better estimator than the range R. But in the case of the panel process, the $C_{PR}$ has more consistency than the other indices at the point of non-conforming ratio which is an important term in quality control. The reason why the $C_{PR}$ using the range has better consistency is explained by introducing the concept of 'flatness ratio'. At least one million cells are present in one panel, so we can't inspect all of them. In estimating the PCI, it is necessary to consider the inspection cost together with the consistency. Even though we want smaller sample size at the point of inspection cost, the small sample size makes the PCI unreliable. There is 'trade off' between the inspection cost and the accuracy of the PCI. Therefore, we should obtain as large a sample size as possible under the allowed inspection cost. In order for $C_{PR}$ to be used throughout the industry, it is necessary to analyze the characteristics of the $C_{PR}$. Because the $C_{PR}$ is a kind of index including subgroup concept, the analysis should be done at the point of sample size of the subgroup. We present numerical analysis results of $C_{PR}$ by the data from the random number generating method. In this study, we also show the difference between the $C_{PR}$ using the range and the $C_P$ which is a representative index using the sample standard deviation. Regression analysis was used for the numerical analysis of the sample data. In addition, residual analysis and equal variance analysis was also conducted.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.1
• /
• pp.33-38
• /
• 2019

Thermal power generation accounts for the highest percentage of domestic power generation, among which coal-fired boiler generation accounts for the highest percentage. Coal boilers generate harmful substances and fine dust during coal combustion and have a serious effect on air pollution. So, fluidized-bed boilers have been introduced as eco-friendly coal boilers. It uses a fluid medium which affect the combustion temperature of coal. Because of it fluidized-bed boilers emit less pollutants than original one. Water-wall tubes play an important role in this fluidized bed boiler. Due to the fluid medium, the wall damage is more severe than the existing boiler. However, there is no quantitative maintenance technique in Korea yet. Remote field eddy current testing is a non-destructive evaluation technique that is often used for inspection of inner and outer wall of tube. it can inspect with non-contact and high speed. However, it is an inspection that proceeds from inside the pipe, and the water-wall tube is not able to enter the interior. In this study, we designed and simulated an external remote field eddy current sensor suitable for water-wall tube of a fluidized - bed boiler using simulations. By obtaining a signal similar to the existing remote field eddy current test, the criteria for the external remote field eddy current sensor design can be presented.

• Journal of the Korean Institute of Gas
• /
• v.25 no.2
• /
• pp.22-27
• /
• 2021

This paper is a purpose to study the failure examples for LPG vehicle. The first example, the researcher certified the incongruity phenomenon decreased engine power by ignition fire leakage because of spark plug threaded part damage assembling in cylinder head. The second example, the timing mark that accurately adjusting the camshaft and crankshaft position were twisted about 0.5 block each other. Finally, the researcher seeked the disharmony phenomenon as it couldn't set ignition timing. The third example, the researcher knew the failure phenomenon by interrupted the closing period for intake valve moving with air flow in the number 3 port of cylinder head as the foreign substance in cylinder head didn't remove. Therefore, the manager of a car has to thorough going inspect and the manufacture of a car must remove the cause of failure with quality assurance.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.49-56
• /
• 2018

As the energy generated by earthquake, tsunami, etc. propagates through the air and disturbs the electron density in the ionosphere, the perturbation can be detected by analyzing the ionospheric delay in satellite signal. The electron density in the ionosphere is affected by various factors such as solar activity, latitude, season, and local time. To distinguish from the anomaly, therefore, it is required to inspect the normal trend of the ionosphere. Also, as the perturbation magnitude diminishes by distance it is necessary to develop an appropriate algorithm to detect long-distance disturbances. In this paper, normal condition ionosphere trend is analyzed via IONEX data. We selected monitoring value that has no tendency and developed an algorithm to effectively detect the long-distance ionospheric disturbances by using the lasting characteristics of the disturbances. In the end, we concluded the $2^{nd}$ derivative of ionospheric delay would be proper monitoring value, and the false alarm with the developed algorithm turned out to be 1.4e-6 level. It was applied to 2011 Tohoku earthquake case and the ionospheric disturbance was successfully detected.

• (The)Study of the Eastern Classic
• /
• no.50
• /
• pp.261-294
• /
• 2013

The purpose of this paper lies how the original text of Chinese classical literary works have been implemented in the paintings of China and Korea, and inspect the ways how of these original text interpreted in paintings. It is an experiment of trying to analyze through literature with painting and read again painting through literature. Qu Yuan(屈原) Prose Poem of Fisherman("漁父辭"), Tao Yuanming(陶淵明) Prose Poem of Returning Home("歸去來辭") and the prose with a poem on the peach blossom spring("桃花源記幷詩"), Du Fu(杜甫), Song of Eight Drunken Celestials("飮中八仙歌"), Su Shi(蘇軾), Odes on the Red Cliff("赤壁賦"), Ou Yangxiu(歐陽脩), Odes of the Sounds of Autumn("秋聲賦") and the paintings which based on these texts were the target of examination. These literary texts shared by Chinese and Korea have been compared in the aspects of acceptance and enjoyment. And on the basis of this process the characteristics of korean paintings expressing the ideas of classical literary works was induced. As a result, the following facts are derived. First, By the emergence of the typical style which was formed historically in China at the korean painting shows that korean painters not only actively embraced the art style of China also did not lose the international sense. Second, through the profound study for chinese painting, they transformed it in accordance with korean aesthetic view and finally revealed typical korean characteristics. Third, the results as described above showed the difference of perception and interpretation of literary works between China and Korea.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.6
• /
• pp.13-25
• /
• 2005

In these days, there are various uses of Linux such as small embedded systems, routers, and huge servers, because Linux gives several advantages to system developers by allowing to use the open source code of the Linux kernel. On the other hand, the open source nature of the Linux kernel gives a bad influence on system security. If someone wants to exploit Linux-based systems, the attacker can easily do it by finding vulnerabilities of their Linux kernel sources. There are many kinds of existing methods for lading source-level vulnerabilities of softwares, but they are not suitable for finding source-level vulnerabilities of the Linux kernel which has an enormous amount of source code. In this paper, we propose the Onion mechanism as a methodology of finding source-level vulnerabilities of Linux kernel variables. The Onion mechanism is made up of two steps. The Int step is to select variables that may be vulnerable by using pattern matching mechanism and the second step is to inspect vulnerability of each selected variable by constructing and analyzing the system call trees. We also evaluate our proposed methodology by applying it to two well-known source-level vulnerabilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.446-452
• /
• 2021

As a higher standard for food consumption is required, the consumption of chicken meat that can satisfy the subdivided food preferences is increasing. In March 2003, the quality criteria for chicken carcasses notified by the Livestock Quality Assessment Service suggested quality grades according to fecal contamination and the size and weight of blood and bruises. On the other hand, it is too difficult for human inspection to qualify mass products, which is key to maintaining consistency for grading thousands of chicken carcasses. This paper proposed the computer vision algorithm as a non-destructive inspection, which can identify chicken carcass parts according to the detailed standards. To inspect the chicken carcasses conveyed at high speed, the image calibration was involved in providing robustness to the side effect of external lighting interference. The separation between chicken and background was achieved by a series of image processing, such as binarization based on Expectation Maximization, Erosion, and Labeling. In terms of shape analysis of chicken carcasses, the features are presented to reveal geometric information. After applying the algorithm to 78 chicken carcass samples, the algorithm was effective in segmenting chicken carcass against a background and analyzing its geometric features.