• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.650-657
• /
• 2001

This paper explains the process of designing a shielded encircling remote field eddy current (RFEC) probe to inspect nuclear fuel cladding tubes and investigates resulting signal characteristics. To force electromagnetic energy from exciter coil to penetrate into the tube, exciter coil is shielded outside by laminations of iron insulated electrically from each other. Effects of shielding and the proper operating frequency are studied by the finite element analysis and the location for sensor coil is decided. However, numerically simulated signals using the designed probe do not clearly show the defect indication when the sensor passes a defect and the other indication appeared as the exciter passes the defect is affected by the shape of shielding structure, which demonstrates that the sensor is directly affected by exciter fields. For this reason, the sensor is also shielded outside and this shielding dramatically improves signal characteristics. Numerical modeling with the finally designed probe shows very similar signal characteristics to those of inner diameter RFEC probe. That is, phase signals show almost equal sensitivity to inner diameter and outer diameter defects and the linear relationship between phase signal strength and defect depth is observed.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.3
• /
• pp.19-25
• /
• 2005

A tunnel that uses the RMR method or the Q-system is called a 'modem tunnel' because the New Austrian Tunneling Method (NATM) is not employed, even though shotcrete and rock bolts are used as support. It is known that the modem tunnel, which is supported by shotcrete, is basically different from the conventional tunnel, which is supported by steel ribs. In order to preserve the load-carrying capacity of the rock mass, loosening and excessive rock deformations must be minimized. Although it is known that this can be achieved by applying shotcrete in the case of the modem tunnel, this has not been clearly demonstrated. In order to inspect the distinctions between the conventional tunnel and the modern tunnel, their support characteristics and the rock loads of the rock mass classifications are compared. Terzaghi's rock load classification was used as the conventional tunnel's representative rock mass classification. The RMR method and the Q-system were adopted as the modem tunnel's representative rock mass classification. The study's results show that the load-carrying capacity of shotcrete, when used as the main support in the modern tunnel, is greater than the load-capacity of the steel ribs used in the conventional tunnel. Because it has been verified that the rock loads of their rock mass classifications are not different, then, according to the rock mass classifications, the load-carrying capacity of the rock mass of the modern tunnel, which uses shotcrete, is not greater than that of the conventional tunnel.

• Archives of design research
• /
• v.17 no.2
• /
• pp.289-300
• /
• 2004

Recently, web casting on the internet has been expanding in number and size. Web Casting is different from the conventional television broadcasting since it can transmit various types of information through multimedia and it also can include interaction between users and broadcasting server. User experience by interaction becomes more important. Therefore, it is needed to win over customers by supplying satisfied experience through creative and different services, especially when there are consider competitions among music casting sites. In order to know how to make customers satisfied, we have to try to inspect what real customers in the Web Sites are acting and thinking, namely 'customer experience'. The 'customer experience' means every experience what users are expecting, doing, thinking and feeling when they stay in the Web site and online. In this thesis, the evaluation Guideline for music casting websites is developed by understanding customer experience on the music casting websites. The process of understanding customer experience was implemented through user observation methods, such as web Diary, group interview, and questionnaire. As a result of the study, 67 evaluation Guidelines with weight rate in 6 categories which are searching music, listening music, music video, music broadcasting, music mailing and other contents are developed. It can be used to analyze strengths and weakness of music casting sites and to establish business strategy for the more satisfied customer experience.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.427-435
• /
• 2009

Cylindrical structures such as pipes and shafts are widely used in various industrial facilities. Recently, researches on magnetostrictive transduction of torsional waves have been actively reported for the nondestructive evaluation of those cylindrical structures. However, the existing magnetostrictive patch transducer has somewhat inconvenient and time.consuming process like patch bonding to a structure since it should employ a magnetostrictive patch having strong magnetostriction. To overcome these limitations of the existing transducer, in this work, we develop a novel modular magnetostrictive transducer to generate and measure torsional waves to inspect a cylindrical structure. The proposed transducer can be applied as viscous liquid coupling with shear couplant or dry coupling without coupling media instead of patch bonding to a structure. We describe a detailed structure of the modular transducer and conduct some experiments to verify its performance.

• Tunnel and Underground Space
• /
• v.20 no.1
• /
• pp.28-38
• /
• 2010

In order to investigate the tendency of general displacements and behaviors with respect to each construction process as well as the applicability of numerical analysis schemes, this research has focused on not only analyzing a variety of field observations made in a NATM tunnel, such as displacement of top and side, stress of shotcrete and axial strength of rock bolt, but also carrying out a series of numerical analyses. It was established from the investigation that the 2-dimensional continuum numerical analysis was the one which could more accurately predict displacement of crown and side in the area of one step excavation (patten, P1-P3), while the 2-dimensional discontinuum analysis was the most suitable scheme to study that of two step excavation (patten, P4-P6). In addition, the 2-dimensional continuum analysis enabled to appropriately predict the axial strength of rock bolt and stress of shotcrete in all the area of the tunnel. Finally, it has been possible to conclude from the study that the 3-dimensional continuum analysis should be applied to inspect the behavior and tendency with respect to each stage of the construction as well as in the case of joints, such as large turnouts where relaxation loads in both of horizontal and vertical direction are piled up.

• Journal of Food Hygiene and Safety
• /
• v.15 no.3
• /
• pp.186-198
• /
• 2000

The quality of the management of sanitation in food service establishments (school lunch programs, hospital patient food services, and commercial catering food services) in Korea was reviewed and evaluated, and ten strategies fur future improvement were suggested. They were: (1) An increase of qualified manpower and improvement of the professional training of the staff; (2) Obtaining special facilities exclusively for food service; (3) Improvement of facilities especially the kitchens; (4) Improvement of policy fur procuring raw materials and being assured of their quality by designing some standards and specifications for the raw materials to be purchased; (5) Production and use accurate and reliable kitchen apparatus and instruments; (6) An increase of the laboratory apparatus and instruments for inspection and evaluation of the sanitary level of raw materials and food service environments; (7) Enforced improvement of personal hygiene of the staff; (8) Use of a variety of methods in sanitary education and training; (9) Actively inspect the quality of imported foods; (10) Strengthening the research and accumulation of background data regarding sanitation management. There is a long process from the production of food to eating. The cooking process is the ultimate end of preparation of food before eating. This process sometimes increases the occurrence of food-borne diseases if we mishandle the food, even we obtained safe food. The process can also remove health hazards and reduce the risk from the hazards if we handle the food well although we have unsafe foods. This means the cooking process is a major key to preventing food-borne diseases. The concepts of hazard analysis critical control point (HACCP) should be applied and practiced in food service establishments in Korea as soon as possible.

• The Korean Journal of Applied Statistics
• /
• v.24 no.1
• /
• pp.115-125
• /
• 2011

By use of a mortality forecasting model and a life table, forecasting the average life expectancy is an effective way to evaluate the future mortality level. There are differences between the actual values of average life expectancy at present and the forecasted values of average life expectancy in population projection 2006 from Statistics Korea. The reason is that the average life expectancy forecasts did not reflect the increasing speed of the actual ones. The main causes of the problem may be errors from judgment for projection, from choice, or use of a mortality forecasting model. In this paper, we focus on the choice of the mortality forecasting model to inspect this problem. Statistics Korea should take a mortality forecasting model with considerable investigation to proceed population projection 2011 without the errors observed in population projection 2006. We compare the five mortality forecasting models that are the LC(Lee and Carter) model used widely and its variants, and the HP8(Heligman and Pollard 8 parameter) model for handling death probability. We make average life expectancy forecasts by sex using modeling results from 2010 to 2030 and compare with that of the population projection 2006 during the same period. The average life expectancy from all five models are forecasted higher than that of the population projection 2006. Therefore, we show that the new average life expectancy forecasts are relatively suitable to the future mortality level.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.1
• /
• pp.18-29
• /
• 2008

NAND Flash memory has been growing popular storage device for the last years because of its low power consumption, fast access speed, shock resistance and light weight properties. However, it has the distinct characteristics such as erase-before-write architecture, asymmetric read/write/erase speed, and the limitation on the number of erasure per block. Due to these limitations, various Flash Translation Layers (FTLs) have been proposed to effectively use NAND flash memory. The systems that adopted the conventional FTL may result in severe performance degradation by the hot data which are frequently requested data for overwrite in the same logical address. In this paper, we propose a novel FTL algorithm called Adaptive Flash Translation Layer (AFTL) which uses sector mapping method for hot data and log-based block mapping method for cold data. Our system removes the redundant write operations and the erase operations by the separating hot data from cold data. Moreover, the read performance is enhanced according to sector translation that tends to use a few read operations. A series of experiments was organized to inspect the performance of the proposed method, and they show very impressive results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.146-157
• /
• 2018

Over the last 10 years, the number of disasters has been increasing in Korea. As a result, the need for temporary residences or shelters for disaster conditions is increasing. In this study, post-disaster refugees housing was developed using lightweight composite panels that are lighter than the materials that make up the existing shelter. To accomplish this, the structural performance of the lightweight composite panel was validated. Among the performance tests on the panels, the transverse load test was conducted according to the ASTM E 72 criteria. As a result of the experiment, when each specimen was subjected to a uniformly distributed load, the allowable load was determined according to the span. All the experiments were ended due to a loss of adhesive at the junction of the skin and core. Further analysis was conducted to calculate the shear stress when the junction was dropped. The mean shear stress at the adhesive surface of a specimen, 150 mm and 200 mm in thickness, was 0.0170MPa and 0.0156MPa, respectively. This suggests that similar values were obtained from panels of equal thickness. In addition, this stress provides a criterion of judgment that could be used to inspect the structural performance of the panels. The performance of the panel was evaluated based on the allowable load, but it may be possible to increase the strength of the lightweight composite panel by improving the joining method to avoid separation from the junction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.455-461
• /
• 2017

The Hebei Spirit oil spill incident occurred in December 7, 2007 and caused approximately $12,547k{\ell}$ of crude oil spillage along 370km off the west coast of Korea. Due to the astronomical and irrecoverable damage to the marine ecosystems and the overall living standards of the residents, the oil spill incident has been notoriously named as the "worst oil spill incident" occurred in Korea. Nevertheless, though almost a decade has passed since the tragic incident in Korea, it appears that compensation and recovery efforts seem not close to satisfaction and the local residents are still struggling with various negative impacts incurred by the incident because of critical cleavage among the interests of the relevant parties to the incident. In this paper, the analysis of Hebei Spirit oil spill incident regarding two aspects was carried out; First, meticulously analyze the practical and statistical data of the incident to precisely examine the fundamental causes for its occurrence to further prevent the reoccurrence of such disastrous incident; and the second, comprehensively inspect reasons for the protracted and inefficient damage recovery and victim-oriented compensation. To be specific, this study observed the levels of compensation against damages from the incident, and the adequacy of it in terms of ultimately and inclusively addressing financial, social and ecological aspects based primarily upon the legal verdicts, and statistical and empirical surveys.