• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.5
• /
• pp.229-236
• /
• 2023

Since 3D printed medical implant parts usually have surface defects, it is necessary to inspect the surface after manufacturing. In order to automate the surface inspection, it is effective to 3D scan the implant and reconstruct it as a scan model such as a point cloud. When constructing a scan model, the characteristics of the shape and material of the implant must be considered because it has characteristics different from those of general 3D printed parts. In this paper, we present a method to reconstruct the 3D scan model of a 3D printed metal bone-plate that is one kind of medical implant parts. Multiple partial scan data are produced by multi-view 3D scan, and then, we reconstruct a scan model by alignment and merging of partial data. We also present the process of the scan model reconstruction through experiments.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.3
• /
• pp.289-296
• /
• 2022

Objectives: Integrating retail and manufacturing enables limitless potential for food businesses, but also creates challenges for navigating within complex food safety regulations. From public health inspectors' (PHIs) perspective, this study aimed (1) to describe the characteristics of crossover businesses in Louisiana, and (2) to evaluate regulation awareness and food safety education needs for business owners and PHIs who inspect crossover businesses. Methods: A self-administered questionnaire was administered to Louisiana Department of Health PHIs using Qualtrics^®. A descriptive analysis was performed, focusing on the frequency of each item. Results: In total, 1774 retailers were conducting or planned to conduct specialized processes, while 552 food manufacturers were performing or planned to perform retail functions. Reduced oxygen packaging, the use of additives such as vinegar as a method of preservation, and smoking food as a method of preservation were observed by 62%, 36%, and 35% of the PHIs, respectively. The PHIs perceived crossover businesses as "not aware" or "somewhat aware" of the food safety regulations. The current food safety training level for these businesses was reported to range from "no training" to "some training but not sufficient." When asked for a self-assessment, the majority of PHIs reported themselves as being "familiar" with the variance requirement for specialized processing. Their confidence in inspecting crossover businesses, however, leaned towards "not confident" or "somewhat confident." Conclusions: To better guard public health, food safety training is needed for crossover food business owners, as well as PHIs, on regulations and conducting or inspecting specialized processes.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.65 no.5
• /
• pp.1-11
• /
• 2023

Due to climate change and aging of reservoirs, damage to embankment slopes is increasing. However, the safety diagnosis of the reservoir slope is mainly conducted by visual observation, and the time and economic cost are formidable to apply soil mechanical tests and slope stability analysis. Accordingly, this study presented a predicting method for the compaction and strength characteristics of the reservoir embankment soil using a portable static cone penetration test. The predicted items consisted of dry density, cohesion, and internal friction angle, which are the main factors of slope stability analysis. Portable static cone penetration tests were performed at 19 reservoir sites, and prediction equations were constructed from the correlation between penetration resistance data and test results of soil samples. The predicted dry density and strength parameters showed a correlation with test results between R² 0.40 and 0.93, and it was found to replace the test results well when used as input data for slope stability analysis (R² 0.8134 or more, RMSE 0.0320 or less). In addition, the prediction equations for the minimum safety factor of the slope were presented using the penetration resistance and gradient. As a result of comparing the predicted safety factor with the analysis results, R² 0.5125, RMSE 0.0382 in coarse-grained soil, R² 0.4182 and RMSE 0.0628 in fine-grained soil. The results of this study can be used as a way to improve the existing slope safety diagnosis method, and are expected to be used to predict the characteristics of various soils and inspect slopes.

• Geomechanics and Engineering
• /
• v.35 no.5
• /
• pp.511-523
• /
• 2023

Canal-side roads frequently collapse due to an unexpectedly greater soft-clay thickness with a rapid drawdown situation. This causes annually increased repair and reconstruction costs. This paper aims to explore the effect of soft-clay thickness on the failure in the canal-side road in the case study of Phra Nakhon Si Ayutthaya rural road no. 1043 (AY. 1043). Before the actual construction, a field vane shear test was performed to determine the undrained shear strength and identify the thickness of the soft clay at the AY. 1043 area. After establishing the usability of AY. 1043, the resistivity survey method was used to evaluate the thickness of the soft clay layer at the failure zone. The screw driving sounding test was used to evaluate the undrained shear strength for the road structure with a medium-stiff clay layer at the failure zone for applying to the numerical model. This model was simulated to confirm the effect of soft-clay thickness on the failure of the canal-side road. The monitoring and testing results showed the tendency of rapid drawdown failure when the canal-side road was located on > 9 m thick of soft clay with a sensitivity > 4.5. The result indicates that the combination of resistivity survey and field vane shear test can be successfully used to inspect the soft-clay thickness and sensitivity before construction. The preliminary design for preventing failure or improving the stability of the canal-side road should be considered before construction under the critical thickness and sensitivity values of the soft clay.

• Journal of Korean Dental Science
• /
• v.16 no.2
• /
• pp.149-155
• /
• 2023

Purpose: The purpose of this study was to evaluate whether the presence of a space maintainer affects the accuracy of an intraoral scanner. Materials and Methods: The maxillary primary first molar typodont tooth was removed from the primary dentition typodont model and a band and loop type space maintainer was delivered. After the model was connected to a dental phantom, intraoral scan was performed using TRIOS 4 (3Shape A/S, Copenhagen, Denmark). The scan was repeated with the same technique without the space maintainer. Each scan was performed 10 times. All scan files into a GOM inspect 2018 software and evaluated the accuracy. The accuracy was evaluated on trueness and precision, and calculated using the root mean square value. Result: When there was a space maintainer in the oral cavity, the trueness value was 0.10±0.02 mm and the precision value was 0.15±0.03 mm. In the absence of the space maintainer, the trueness value was 0.12±0.03 mm and the precision value was 0.16±0.04 mm. There were no significant differences depending on the presence of a space maintainer (P>0.05). Conclusion: Within the limits of this study, the accuracy of the intraoral scanner was not influenced by the presence of space maintainer.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.557-561
• /
• 2023

This study aims to assess how effective environmental management can be accomplished through monitoring of environmental conditions in patient discharge rooms within healthcare facilities through direct observation and the use of fluorescent markers. From March to July 2013, this study evaluated 448 check-out beds in wards and intensive care units before and 494 after intensive environmental monitoring activities. The collected data were analyzed using the SPSS 21.0 program. According to the study's findings, direct observation increased from 95.2% prior to the implementation of intensive environmental monitoring activities to 98.9% following the implementation, which was statistically significant. The non-detection rate of fluorescent markers exhibited an increase from 96.1% prior to the commencement of intensive environmental monitoring activities to 98.0% following their implementation. However, it should be noted that this observed increase was not deemed statistically significant. In light of the results of this research, it is imperative to evaluate the effectiveness of environmental management by employing a variety of assessment methods, including direct observation and fluorescent markers.

• Journal of Sensor Science and Technology
• /
• v.32 no.5
• /
• pp.320-327
• /
• 2023

In this study, an FPGA-based sealer inspection system was developed to inspect the sealer applied to install vehicle glass on a car body. The sealer is a liquid or paste-like material that promotes adhesion such as sealing and waterproofing for mounting and assembling vehicle parts to a car body. The system installed in the existing vehicle design parts line does not detect the sealer in the glass rotation section and takes a long time to process. This study developed a line laser camera sensor and an FPGA vision signal processing module to solve this problem. The line laser camera sensor was developed such that the resolution and speed of the camera for data acquisition could be modified according to the irradiation angle of the laser. Furthermore, it was developed considering the mountability of the entire system to prevent interference with the sealer ejection machine. In addition, a vision signal processing module was developed using the Zynq-7020 FPGA chip to improve the processing speed of the algorithm that converted the profile to the sealer shape image acquired from a 2D camera and calculated the width and height of the sealer using the converted profile. The performance of the developed sealer application inspection system was verified by establishing an experimental environment identical to that of an actual automobile production line. The experimental results confirmed the performance of the sealer application inspection at a level that satisfied the requirements of automotive field standards.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1055-1062
• /
• 2023

Globally, the need for remanufacturing or reusing ships and various mechanical parts continues to increase due to environmental problems including global warming. Research on remanufacturing is being carried out in many areas. However, research on inspection and classification to identify the performance or degree of wear of mechanical parts is insufficient. In particular, studies on the inspection-ability and classification-ability of mechanical parts equipped with various materials and complex forms are highly required. Remanufacturing must be considered from the stage of design to extend the life cycle of mechanical parts. Particularly, it is very important to perform research for evaluating the degree of ease to inspect and classify various sorts of wear or deterioration of parts caused by long-term use easily. In this study, the degree of ease in inspecting or classifying mechanical parts for remanufacturing is defined as inspection-ability and classification-ability. In fact, to remanufacture old parts, inspection-ability and classification-ability should be reflected from the stage of design. The purpose of this study is to evaluate the inspection-ability and classification-ability of ships and various mechanical parts. This researcher has presented the quantitative evaluation procedure of inspection-ability and classification-ability, derived the factors and ranges that influence each of the details of easiness, assigned scores according to the ranges of the factors, and calculated weights. Lastly, this study presents the procedure of scoring to evaluate the overall weights of inspection-ability and classification-ability and also inspection-ability and classification-ability quantitatively.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.3
• /
• pp.184-190
• /
• 2010

Lowering of auditory caused by noise is increased, these days. Especially, people who have noise induced hearing loss by permanent exposure to noise are increased according to spread out of multimedia and improvement of information equipment. The pure tone audiometry used in the hospital presently inspect auditory manually up to 8,000 Hz bandwidth. So the case of noise induced hearing loss which suffered from extended high frequency over 8,000 Hz, there is a problem to prevent hearing loss by precognition. In this paper, we proposed a method to prevent noise induced hearing loss by using extended high frequency bandwidth from 12,000 Hz to 20,000 Hz. We have got a experimental result to fifty of twenties who are often used to earphones through portable equipment. As a result, 36% of twenties show lowering of auditory caused by noise and 2% of them shows severe loss of hearing.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.3
• /
• pp.139-150
• /
• 2024

PURPOSE. The purpose of this diagnostic study was to assess the accuracy and time efficiency of a digital method to draw the denture foundation extension outline on preliminary casts compared with the conventional technique. MATERIALS AND METHODS. A total of 28 preliminary edentulous casts with no anatomical landmarks were digitized using a laboratory scanner. The outlining of the entire basal seat of the denture was performed on preliminary casts and digitized. Casts with no extension outline were digitized and outlines were drawn using software (DWOS, Straumann). The accuracy of the extension outlined between both techniques was evaluated in the software (GOM Inspect; GOM GmbH) by file superimposition. Specificity and sensitivity tests were applied to measure accuracy. The paired t-test (95% CI) was used to compare the mean total area and the working time. RESULTS. The accuracy ranged from 0.57 to 0.92. The buccal and labial frenulum showed a lower value in the maxilla (0.57); while the area between the retromolar pad and buccal frenulum (0.64) showed a lower score in the mandible. The maxillary denture foundation and the working time for both arches were significantly longer for the digital method (P < .001). CONCLUSION. The denture foundation extension outline exhibited a sufficiently excellent accuracy for the digital method, except for the maxillary anterior region. However, the digital method required a longer working time.