• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.897-903
• /
• 2002

In this paper, a modified feeding structure for microstrip patch antenna is suggested for improving the performances. The proposed antenna has a gap between the transmission line and the recessed part of the radiating patch which makes a capacitive coupling. It shows higher 511(-l4dB) and lower cross polarization level(-2OdB) compare with the conventional inset ftd patch antenna while having a similar characteristics in another evaluating items. Experimental results are examined and considered to apply to the S-Band application, and the effectiveness has been confirmed by FDTD simulation and measurement simultaneously.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.136-141
• /
• 2024

In this paper, a broadband inset-fed microstrip patch antenna operating at 10.525 GHz band was proposed. The proposed broadband inset-fed microstrip patch antenna consists of three narrow rectangular patches. At the center of the center patch, two symmetrical side patches were connected by a strip conductor and were arranged with their centers shifted in a perpendicular direction with respect to the center patch. For performance comparison, a conventional inset-fed square microstrip patch antenna was designed. Experiment results show that the frequency band of the measured input reflection coefficient with a voltage standing wave ratio less than 2 for the broadband inset-fed microstrip patch antenna was 10.036-11.051 GHz (9.63%), whereas that for the conventional inset-fed rectangular microstrip patch antenna was 10.306-10.772 GHz (4.42%). Therefore, the input reflection coefficient frequency bandwidth of the fabricated broadband inset-fed microstrip patch antenna was increased by 2.18 times, compared to the conventional inset-fed square microstrip patch antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2359-2366
• /
• 2014

In this paper, the characteristics of a inset fed rectangular microstrip patch antenna for S-band applications is studied. The variations of return loss along inset length and inset width are investigated on the inset fed rectangular microstrip patch antenna. From the investigated results, the optimized inset fed antenna is designed. At the resonant frequency 2.3 GHz, the optimized dimension of the patch is $45.0mm{\times}40.9mm$. The inset length and width are 14 mm and 1 mm, respectively. The designed antenna is fabricated on the substrate which has a dielectric constant and thickness with 2.5 and 0.787 mm. Simulation results are obtained by a 3D EM(Electromagnetic) solver. The resonant frequency and return loss are measured 2.3025 GHz and -21.11 dB, respectively. The measured and simulated results of the fabricated antenna are in good agreement.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.73-78
• /
• 2021

To minimize the resonance frequency error when design Inset-Fed Microstrip Patch Antenna using current formulas. Especially It is found that a constant relation between Antenna patch width and frequency error. Using this relation, calculation frequency and simulation frequency are compared. Finally the comparison induced a formula of revised antenna patch width for accurate frequency in 2-10 GHz. And this formula reduced 2.54% of average frequency error. Last, the Antenna which has same variation with the simulation was producted and measured. It proved the formula's validity.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.405-410
• /
• 2023

This paper presents a novel method of implementing a dual-band antenna using a square patch with an inset feed structure. The proposed method is to simply design a dual-band antenna using an asymmetric inset structure with different lengths of slots dug into the patch for inset feeding. To verify the proposed method, a dual-band inset patch antenna supporting 1.57 GHz GPS and 2.4 GHz WiFi bands was designed and manufactured on a 1 mm thick FR4 substrate. From measurement, it was confirmed that the frequency bands of the antenna that satisfy a return loss of -10dB or less are 1.55~1.57GHz and 2.41~2.45GHz, which has dual-band characteristics. Using the proposed method, it is possible to simply implement a dual-band antenna using inset feeding, and it is expected to be utilized in a variety of application fields.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1785-1790
• /
• 2014

In communication systems, there are various types of microstrip antenna that can be used for many applications. This paper mainly focuses on the simple design of inset fed rectangular microstrip patch antenna to operate at frequency of 2.45 GHz for wireless communication. The study involves using HFSS simulator to design the antenna dimensions and to determine its performance. This antenna is based on a thickness of 1.6mm Teflon substrate with a dielectric constant of approximately 2.2, on one side of the substrate and another side has a ground plane. After simulation, the antenna performance characteristics such as return loss, VSWR, gain, radiation pattern are obtained.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.921-926
• /
• 2014

In this paper, the characteristics of inset fed microstrip antenna loaded with CSLR(complementary single loop resonator) are studied. Effective permeability parameters of the SLR unit cell is retrieved from simulated scattering parameters, and structure parameters of the SLR unit cell are selected so that effective permeability is negative value at the operating frequency. The optimized inset fed microstrip antenna loaded with SLR for a $3{\times}3$ array in the ground plane of a conventional patch antenna is designed and simulation results of return loss and radiation pattern are shown. At resonant frequency 2.82 GHz, the overall dimension of the proposed antenna is reduced by approximately 56.8% compared to the conventional inset fed antenna. Simulation results are obtained by 3D FEM solver(Ansoft's HFSS).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.129-129
• /
• 2009

In this paper, a tunable microstrip patch antenna designed using RF MEMS switches is reported. The design and simulation antenna were performed using high frequency structure simulator (HFSS). The antenna was designed in ISM Band and operates simultaneously at 2.4 GHz and 5.7 GHz with a -10 dB return-loss bandwidth of 20 MHz and 180 MHz, respect-tively. To obtain high efficiency and improve integrated ability, the High Resistivity Silicon (HRS) wafer was used for the antenna. The antenna achieved high gain with 8 dB at 5.7 GHzand 1.5 dB at 2.4 GHz. The RF MEMS DC contact switches was simulated and analysis by ANSYS software.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1047-1052
• /
• 2016

In this paper, we propose the CSLR(: Complementary Single Loop Resonators)-loaded inset fed patch antenna with a conducting reflector to improve the radiation patterns. Reflector of the proposed antenna is located below about ${\lambda}_0/4$ from the ground plane of the patch, the size is about two times of the patch. The proposed antenna is designed and fabricated on the substrate which has a dielectric constant and thickness with 2.5 and 0.787 mm, respectively. Simulation results are obtained by using the HFSS, 3D EM Solver based Finite Element Method(: FEM). The resonant frequency and matching characteristics of the antenna with reflector are substantially the same as when there is no change in the antenna without reflector, it is confirmed that radiation patterns are significantly improved by the reflector.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.33-39
• /
• 2021

In this study, we tried to find the correlation of the parameters and dual resonance of U-slot microstrip patch antenna with L-shaped Inset-feed structure and design broadband antenna using them. In the first step, we classified cases where dual resonance occurs through changes in antenna parameters that affect antenna performance. In the second step, we correlated each antenna parameter to the location and intensity of the resonance point, and 3 dB bandwidth. Next, antenna simulation confirmed the process of designing to have wide bandwidth using the correlation in the second step previously presented in the U-slot antenna case with narrow bandwidth. Finally, we fabricated a designed antenna and demonstrated the validity of antenna bandwidth broadening through the correlation analysis.