• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.11-26
• /
• 2007

In this paper, an experiment was done where the input device used the linear multiple regression and the sRGB color space to perform a color transformation. The output device used the GOG, GOGO and sRGB for the color transformation. After the input device underwent a color transformation, a $3\;{\times}\;20\;size$ matrix was used in a linear multiple regression and the scanner's color representation of scanner was better than a digital still camera's color representation. When using the sRGB color space, the original copy and the output copy had a color difference of 11. Therefore it was more efficient to use the linear multiple regression method than using the sRGB color space. After the input device underwent a color transformation, the additivity of the LCD monitor's R, G and B signal value improved and therefore the error in the linear formula transformation decreased. From this change, the LCD monitor with the GOG model applied to the color transformation became better than LCD monitors with other models applied to the color transformation. Also, the color difference varied more than 11 from the original target in CRT and LCD monitors when a sRGB color transformation was done in restricted conditions.

• Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.86-94
• /
• 2016

In this paper, position control of focal plane compensation device using piezoelectric actuator is conducted. The forcal plane compensation device installed on earth observation satellite camera compensates micro-vibration from reaction wheels. In this study, four experimental models of the open-loop compensation device are derived using MATLAB system identification toolbox in the input range of 0~50Hz. Subsequently, the PID controller for each model is designed and the performance test of each controller is conducted through MATLAB/Simulink. According to frequency response analysis of the closed-loop compensation device system, the PID controller designed for 38~50Hz input range has enough tracking performance for the whole 0~50Hz input range. The maximum output error is about $1{\mu}m$ for the input range. The simulation results has been verified by the experimental method.

• Journal of Digital Convergence
• /
• v.12 no.7
• /
• pp.253-259
• /
• 2014

A new style keyboard which is user friendly and can be used efficiently in a small area is proposed in this paper. The most pre-existing keyboards were using the style of selecting a key among the arranged keys even the formats of key arrangement and the ways of using them were different. A new style of information input device called Dynamic Keyboard(DynaKey) is designed in this paper. Dynakey is a useful information input device which can be used efficiently for a mobile device with small display and for handicapped persons who has difficulties of selecting precise positions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.291-297
• /
• 1998

In order to accomplish the digital map production I/O devices should be used which are used for data input procedure to convert original paper map(hardcopy) data into computer compatible digital map data, and for the mapsheet output procedure of worked out data. For the input device, digitizer and scanner are most frequently used. Digitizer has possibility of direct production of digital data, and are mainly used for input procedure of partly plotted source map. In contrary, scanner is rather easy to operate the instrument, so that is widely used for the input procedure of original sheet map. In this study, to extract the input device characteristics, some kinds of digitizers and scanners were cheesed and used for the positional error analysis through the operational method and types of instruments. Also for the output device characteristics, some kinds of plotter and materials are used and compared to analyze the positional error through the instrumental types and output sheet materials.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.388-394
• /
• 2003

To handle the high level radioactive materials such a spent fuel, the master-slave manipulators (MSM) are widely used as a remote handling device in nuclear facilities such as the hot cell with sealed and shielded space. In this paper, the Digital Mockup which simulates the remote operation of the Advanced Conditioning Process(ACP) is developed. Also, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed. The process equipment of ACP and Maintenance/Handling Device are drawn in 3D CAD models using IGRIP. Modeling device of manipulator is assigned with various mobile attributes such as a relative position, kinematics constraints, and a range of mobility, The 3D graphic simulator using the external input device of space ball displays the movement of manipulator. To connect the external input device to the graphic simulator, the interface program of external input device with 6 DOF is deigned using the Low Level Tele-operation Interface(LLTI). The experimental result shows that the developed simulation system gives much-improved human interface characteristics and shows satisfactory response characteristics in terms of synchronization speed. This should be useful for the development of work's education system in the virtual environment.

• Journal of Digital Contents Society
• /
• v.5 no.1
• /
• pp.22-27
• /
• 2004

To handle the high level radioactive materials such a spent fuel, the master-slave manipulaters (MSM) are wide1y used as a remote handling device in nuclear facilities such as the hot cell with sealed and shielded space. In this paper, the Digital Mockup which simulates the remote operation of the Advanced Conditioning Process(ACP) is developed. Also, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed. The process equipment of ACP and Maintenance/Handling Device are drawn in 3D CAD model using IGRIP. Modeling device of manipulator is assigned with various mobile attributes such as a relative position, kinematics constraints, and a range of mobility. The 3D graphic simulator using the extermal input device of spare ball displays the movement of manipulator. To connect the exterral input device to the graphic simulator, the interface program of external input device with 6 DOF is deigned using the Low Level Tele-operation Interface(LLTI). The experimental result show that the developed simulation system gives much-improved human interface characteristics and shows satisfactory reponse characteristics in terms of synchronization speed. This should be useful for the development of work`s education system in the environment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.3
• /
• pp.220-226
• /
• 2014

Input current ripple and harmonic components of the power device are main causes of electromagnetic interference (EMI). Although the discontinuous conduction mode (DCM) operation can reduce harmonic components of the power device by reducing reverse recovery current of diode and turn-off voltage spikes of the switch, input current ripple increases due to high peak to peak inductor current. Therefore, in this paper, frequency control algorithm is proposed to reduce the input current ripple of DCM operated interleaved boost converter. In the proposed algorithm, duty ratio is fixed either 0.33 or 0.67 to minimize the input current ripple and the switching frequency is controlled according to operating conditions. 600 W 3-phase interleaved boost converter prototype system is built to verify proposed algorithm.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.1
• /
• pp.27-36
• /
• 2005

Most of flated scanners and digital cameras in prepress process utilize CCD technology. Device calibration and characterization process is needed to transform the device dependent color to the device independent color. ICC profiles for digital input devices encapsulated information relating the device values to CIELAB or CIEXYZ coordinates. The main purposes of this article is to evaluate some of the transformation methods based on ICC proposed device profiles and to propose optimal color transformation method for accurate color imaging in printing process.

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.4
• /
• pp.41-51
• /
• 2016

PURPOSE : The purpose of this study was to identify whether 3D motion input device based mirror therapy could improve on upper extremity function, quality of life and depression in chronic stroke patients METHOD : Thirty six patients with chronic stroke were enrolled and randomly divided into three groups: 3D leapmotion mirror therapy group, mirror therapy group, and sham therapy group. 3D leapmotion mirror therapy group performed 3D motion input device based mirror therapy, mirror therapy group performed general mirror therapy, control group performed sham therapy. All patients received a total of 15 exercise session over a 5 week period (three times per week). Fugl-Meyer Assessment-upper extremity(FMA-UE), Stroke Specific-Quality of Life(SS-QOL), Beck Depression Inventory(BDI) were performed prior to and five weeks after the treatment RESULT : Subjects in the 3D leapmotion mirror therapy group showed significant improvements in upper extremity function, quality of life and depression following training. The changes of upper extremity function, quality of life and depression in the 3D leapmotion mirror therapy group were significantly more than them of the control group. CONCLUSION : The result of this study suggest that 3D motion input device based mirror therapy is an intervention to improve on upper extremity function, quality of life and depression in chronic stroke patients.

• Journal of Korean Physical Therapy Science
• /
• v.27 no.2
• /
• pp.80-87
• /
• 2020

Background: The purpose of this study was to investigate the effect of the use of an alternative input device on the patient's work performance and satisfaction in patients with cerebral palsy who cannot use computers. Design: Case Series Description. Methods: The participant was one adult cerebral palsy. The three tasks were applied with an alternative input device (Quick-Glance), 1 session an hour, 3 times a week, a total of 12 times for 4 weeks. The assessment was using the Canadian Occupational Performance Measure (COPM). The evaluation was performed pre-test before the intervention, post-test after the last intervention, and follow-up after one month. Results: The COPM(Satisfaction and performance scores) showed 3 points for pre-test, 7 points for post-test, and 7 points for follow-up. Conclusion: Purposeful computer work activity, which is an alternative input device, has a positive effect on work performance and satisfaction of cerebral palsy patients who are difficult to use computer.