• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.646-659
• /
• 2022

Purpose: In this study, we developed a 4-way sway prevention brace that efficiently reduces the installation area and has excellent stability and seismic performance compared to the conventionl sway prevention brace used in existing firefighting facilities. The performance and reliability of the developed 4-way way prevention brace were analyzed by the tensile, compression tests and seismic tests. Method: As the static test, 4-way sway prevention braces were installed on the horizontal and vertical pipes to perform the tensile and compression tests based on the KFI certification standard and the maximum movement was measured at the rated load. As a dynamic test, 4-way sway prevention braces were installed in the pipes filled with water, and the test response spectrum to the input excitation wave were measured through the acceleration sensors. After the seismic tests, separation, failure, and local deformation of the pipes, and 4-way sway prevention braces were not observed. Result: The results of the tensile and compression tests indicated that the maximum movement of the pipe during tension and compression was 50% to 70% or less compared to the certification values, indicating that the performances of the 4-way sway prevention braces were very excellent. The results of the the seismic tests indicated that the test response spectrum of the 4-way sway prevention braces is within the required response spectrum. Conclusion: In this study, it was found that the 4-way sway prevention braces satisfied the KFI certification standard and were superior compared to the existing sway prevention brace in terms of the stability, cost, and installation area.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.7
• /
• pp.77-84
• /
• 2023

This research originated from the need to enhance the security of secure multiparty computation by ensuring that participants involved in multiparty computations provide truthful inputs that have not been manipulated. While malicious participants can be involved, which goes beyond the traditional security models, malicious behaviors through input manipulation often occur in real-world scenarios, leading to privacy infringements or situations where the accuracy of multiparty computation results cannot be guaranteed. Therefore, in this study, we propose a signature scheme applicable to secure multiparty technologies, combining it with secret sharing to strengthen the accuracy of inputs using authentication techniques. We also investigate methods to enhance the efficiency of authentication through the use of batch authentication techniques. To this end, a scheme capable of input certification was designed by applying a commitment scheme and zero-knowledge proof of knowledge to the CL signature scheme, which is a lightweight signature scheme, and batch verification was applied to improve efficiency during authentication.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.122-128
• /
• 2017

Recently, accidents such as human accidents are increasing rapidly due to natural disasters and changes in social conditions due to abnormal weather. As a result, damage has been causing massive damage unlike the past. In the case of small and medium enterprises excluding financial institutions and big company, there is no system for prevention and restoration for stable operation from various risks such as human and natural disasters. As the current disaster continues, public and private companies have raised the need for BCM, and with the introduction of the ISO22301 certification system, the company has been establishing and operating Enterprise Disaster Management Standards in the Ministry of Public Safety and Security since 2007. However, in most SMEs, it is hard to bear the input of internal labor and investment cost, and there is a lack of personnel with expertise to conduct BCM diagnosis. Therefore, in this paper, we will study the diagnosis level of enterprise continuity plan which is commonly used in Korea and abroad. Based on this, we will study the BCM system diagnosis method which can be applied to small and medium enterprises in Korea efficiently.

• Journal of Information Technology Services
• /
• v.19 no.3
• /
• pp.101-115
• /
• 2020

Electronic voting is one of information technology service to handle a wide range of functions, including registration, certification, input and results of voting, using electronic technology, depending on the degree of automation. It helps voters exercise their voting rights not only for individual suffrage but also for major corporate decisions as shareholders by expressing their opinions regardless of geographical and time constraints. Such electronic voting helps open and expand voting participation, but on the contrary, it is possible to identify who voted and what kind of vote, such voting cannot guarantee confidentiality. Therefore, if blockchain technology is applied to electronic voting, it can increase the speed of processing and confidentiality by encrypting voting information. In this regard, the study aims to identify institutional issues on how electronic voting can be activated at a company's shareholders' meeting, and to find ways to overcome the limitations of existing electronic voting by utilizing the technical characteristics of blockchain. This study proposes a consortium-type blockchain-based electronic voting system to enhance the convenience and reliability of electronic voting for shareholders' meetings. In addition, this paper suggests how to enhance shareholders' profits through electronic voting at shareholders' meetings, as well as its policy measures and future improvements.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.2
• /
• pp.83-90
• /
• 2013

Integrated aircraft synthesis process for rapid analysis and design is described in this paper. Data flow between different analysis fields is described in details. All the data are divided into several groups according to importance and source of the data. Analysis of design requirements and certification regulations is carried out to determine baseline configuration of an aircraft. Overall design process can be divided into initial sizing, conceptual and preliminary design phases. Basic data for conceptual design are obtained from initial sizing, CAD and geometry analysis. Basic data are required input for weight, aerodynamics and propulsion analyses. Results of this analysis are used for stability and control, performance, mission, and load analysis. Feasibility of design is verified based on analysis results of each discipline. Design optimization that involves integrated process for aircraft analysis is performed to determine optimum configuration of an aircraft on a conceptual design stage. The process presented in this paper was verified to be used for light aircraft design.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.4
• /
• pp.653-659
• /
• 2015

In the last few years, the regulations for efficiency grade of the three phase induction motor are internationally being discussed and upgraded for the protection of environment and energy saving. So the efficiency improvement and the reliable test result are essential to determine the premium grade three phase induction motor. While a study on developing the efficiency motor is active, there is little research about the guarantee for efficiency. So in this paper, the dispersion characteristic of the efficiency is studied using uncertainty theory for the three phase induction motor to improve the reliability of efficiency. The values such as input voltage, current, speed, torque were obtained by loss separation method to evaluate the uncertainty. From the result, it was known that the important loss factor could affect the uncertainty is the stray loss.

• International Journal of Advanced Culture Technology
• /
• v.11 no.1
• /
• pp.171-180
• /
• 2023

This study is to develop a performance analysis model for SMEs.Based on similar performance indicators through previous studies, performance indicators for SMEs were rewritten.Through the Korean Journal Citation Index (KCI), 75 related data were classified and a comprehensive SME performance analysis model was developed.Performance analysis was divided into two axes and classified into tables.The horizontal axis is the spatial performance range, which is divided into three areas: performance management by department/function, integrated performance management for the entire organization, and governance performance management requiring policy feedback. The vertical axis is subdivided into short-term, mid-term, and long-term by time and growth stage, and is divided into three parts: technical performance according to technological input, economic performance as organizational performance, and social performance for policy utilization. Then, performance indicators were mapped to each column. As a result of the survey, 28% of technical performance was analyzed as a result of frequency analysis, and performance indicators were organized into five categories: IT, R&D, certification, patent, and innovation. Economic performance was divided into 29%, BSC, HRD, logistics, production quality management, financial support, asset management, etc. 6 categories, social performance 43%, ESG, marketing, export, policy support, consulting, cooperation, etc. 7 categories.Limitations of the study include the narrowness of the survey that derived only performance indicators despite being a meta-analysis, and the performance model was mapped and classified according to growth stage and support period.however Insufficiency of validity due to lack of evidence, performance indicators were developed, but there were limitations in utilization for practical use.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.261-273
• /
• 2011

Mega-corporations are emerging as a result of M&As (mergers and acquisitions) in the logistics industry. The global logistics market has progressed in a continuously competitive manner. Global logistics corporations provide integrated set of services, from production to disposal in order to manage the process efficiently throughout the diverse regions of the world. To advance into an total integrated logistics provider, the corporation must have professional knowledge in logistics and information technology which are necessary to deliver effective integrated logistics solutions. The government has integrated the logistics corporations both horizontally and vertically with the aim to foster logistics corporations possessing global competitiveness. Six years have passed since the implementation of the comprehensive (total) logistics industry certification system in pursuit of making Korea the hub for the Northeast Asian logistics market. This study compares and analyzes the efficiency of nine mega integrated logistics providers by applying the CCR model and BCC model. Each of the nine corporations is subject to certification as integrated logistics corporations. In Korea, nine corporations are certified individually as integrated logistics corporations out of the 31 logistics providers. The analysis showed that the Glovis was the most efficient integrated logistics provider reaching 100% in efficiency and displayed the highest efficiency for six consecutive years from 2005 to 2010. The study also found that the Glovis will be able to maintain 100% in efficiency rate, even though the input are increased over six times as many as those of 2010.

• Wind and Structures
• /
• v.14 no.5
• /
• pp.383-411
• /
• 2011

Roof is an integral part of building envelope. It protects occupants from environmental forces such as wind, rain, snow and others. Among those environmental forces, wind is a major factor that can cause structural roof damages. Roof due to wind actions can exhibit either flexible or rigid system responses. At present, a dynamic test procedure available is CSA A123.21-04 for the wind uplift resistance evaluation of flexible membrane-roofing systems and there is no dynamic test procedure available in North America for wind uplift resistance evaluation of rigid membrane-roofing system. In order to incorporate rigid membrane-roofing systems into the CSA A123.21-04 testing procedure, this paper presents the development of a load cycle. For this process, the present study compared the wind performance of rigid systems with the flexible systems. Analysis of the pressure time histories data using probability distribution function and power spectral density verified that these two roofs types exhibit different system responses under wind forces. Rain flow counting method was applied on the wind tunnel time histories data. Calculated wind load cycles were compared with the existing load cycle of CSA A123.21-04. With the input from the roof manufacturers and roofing associations, the developed load cycles had been generalized and extended to evaluate the ultimate wind uplift resistance capacity of rigid roofs. This new knowledge is integrated into the new edition of CSA A123.21-10 so that the standard can be used to evaluate wind uplift resistance capacity of membrane roofing systems.

• Journal of Korea Multimedia Society
• /
• v.8 no.11
• /
• pp.1462-1471
• /
• 2005

Recently, the medical image has been digitized by the development of computer science and digitization of the medical devices. There are needs for database service of the medical image and long term storage because of the construction of PACS(picture archiving and communication system) following DICOM(digital imaging communications in medicine) standards, telemedicine, and et al. However, it also caused some kinds of problems, such as illegal reproduction of medical image, proprietary rights and data authentication. In this paper, we propose the new digital watermarking technique for medical image based on public key encryption algorithm for integrity verification. It prevents illegal forgery that can be caused after transmitting medical image data remotely. The watermark is the value of bit-plane in wavelet transform of the original image for certification method of integrity verification. We proposed the embedding regions are randomly chosen considering ROI, and a digital signature is made using hash function of MD5 which input is a secret key. The experimental results show that the watermark embedded by the proposed algorithm can survive successfully in image processing operations and that the watermark's invisibility is good.