• Journal of the Korean Wood Science and Technology
• /
• 제35권2호
• /
• pp.69-78
• /
• 2007

The mechanical properties of wood flour, Hwangto (325 and 1,400 mesh per 25,4 mm) and coupling agent-reinforced HDPE composites were investigated in this study. Hwangto and maleated polyethylene (MAPE) were used as an inorganic filler and a coupling agent, respectively. The addition of Hwangto and MAPE to virgin HDPE also increased the Young's modulus in the smaller degree. The addition of wood flour and Hwangto to virgin HDPE increased the tensile strength, due to the high uniform dispersion of HDPE by high surface area of Hwangto in HDPE and wood flour. MAPE also significantly increased the tensile strength. When wood flour was added, there was no notable difference on the tensile properties, in terms of Hwangto particle size. Hwangto also improved the flexural modulus and strength of reinforced HDPE composites. With different particle sizes of Hwangto, there was no considerable difference in flexural modulus and strength of reinforced HDPE composites. The addition of Hwangto showed slightly lower impact strength than that of wood flour. However, the particle size of Hwangto showed no significant effect on the impact strength of reinforced composites. In conclusion, reinforced HDPE composites with organic and inorganic fillers provide highly improved mechanical properties over virgin HDPE.

• Elastomers and Composites
• /
• 제43권4호
• /
• pp.230-240
• /
• 2008

분산중합법에 의해 무기물을 포함하는 고분자 미립자를 합성하기 위해 styrene과 n-butyl methacrylate가 알루미나와 함께 중합되었다. Styrene과 n-butylmethacrylate의 무게 비는 3:1이었고, 입자안정제는 poly(N-vinyl pyrrolidon), 중합 개시제로는 2,2'-azobis(isobutyronitrile)를 사용하여 개시제의 농도, 분산매의 종류, 분산매의 혼합 용해도 상수 (${\delta}_{mix}$), 커플링제의 종류와 농도에 따른 입자경을 조사하였다. 개시제의 농도가 증가함에 따라 입자경이 소폭 상승하였고 분산매의 극성이 증가할수록 입경이 증가하였고, 분산매로서, 이소프로판올과 이온교환수를 조성비에 따라 사용한 경우, $[{\delta}_{mix}]^{-4.01}\;{\propto}$ 평균 입자경과 $[{\delta]_{mix}]^{-0.83}\;{\propto}$ 입경 분포의 관계를 얻을 수 있었다. 커플링제의 종류와 농도변화에 따른 입자경 및 입자경 분포는 뚜렷한 차이가 없었다.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.511-515
• /
• 2014

The thermodynamic instability of bubbles in wet-foam colloidal suspension is due to the substantial area of their gas/liquid interface. Several physical processes lead to gas diffusion from smaller to larger bubbles, resulting in a coarsening and Ostwald ripening of wet foam. This includes a narrowing of the bubble size distribution. The distribution and microstructure of porous ceramics, the adsorption free energy and Laplace pressure of $Al_2O_3$ particle-stabilized colloidal suspension, and $SiO_2$ content were investigated for tailoring the bubble size. Wet-foam stability of more than 80% is related to the degree of hydrophobicity with contact angles of $62-70^{\circ}$ achieved from the surfactant. The contact angle replaces part of the highly energetic interface and lowers the free energy of the system. This leads to an apparent increase in the surface tension (26-33 mN/m) of the colloidal suspension.

• 폴리머
• /
• 제34권1호
• /
• pp.8-13
• /
• 2010

발포체의 물성은 발포체의 밀도, 사용된 폴리머의 기계적 물성과 열린 셀의 함량, 셀 크기, 셀 크기 분포, 셀 형태, 스킨층의 두께 등을 포함하는 셀 구조에 의존하며, 이러한 발포체의 밀도는 사용된 폴리머의 종류와 가교제의 농도 그리고 가공 기술 및 가공 조건과 같은 다양한 원료 물질과 가교 조건에 영향을 받는다. 본 연구에서는 폴리에스터 폴리올, MDI, 아민계 촉매, 틴계 촉매, 실리콘 유화제, 물을 기본 폴리우레탄 발포체의 조성으로 설정하였으며, 발포체에 있어서 stiff-chain 요소인 사슬 연장제의 첨가에 의하여 가교 밀도를 증가시켰다. 또한, 폴리우레탄 발포체의 기계적 물성을 높이기 위해 무기 충전제로 입자 크기와 $SiO_2$ 함량이 다른 실리카와 탈크 각각 2종류를 사용하였다. 발포체의 제조시 사슬 연장제와 무기 충전제의 종류와 함량비를 달리하면서 모듈러스, 인장 강도, 압축 강도, 경도의 물성 변화를 알아보았고, 전자현미경을 통해 셀의 크기 변화와 무기 충전제의 분포도를 관찰하였다.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.229-240
• /
• 2014

Rain events are extremely important for phosphorus (P) dynamics in rivers since large portions of annual river P loads can be transported in particulate forms during only a few major events. Despite their importance, a precise estimation of P contribution in river sediments after rainy seasons has rarely been reported. This study estimated the longitudinal variation in the concentrations of different inorganic P fractions in bed sediments of the South Han River over a rainy season, through using the sequential extraction method. Non-apatite P was the dominant form, representing more than 60% of total inorganic P (TIP) content in sediments. Although no significant variation of TIP contents was observed, the proportion of bioavailable P in TIP pools decreased after the rainy season. The concentrations of individual inorganic P fractions ($NH_4Cl-P$, $NH_4F-P$, NaOH-P, and $H_2SO_4-P$) were significantly different across sites and after the rainy season (p < 0.05, two-way ANOVA). $NH_4F-P$ and NaOH-P concentrations in sediments increased in a downstream direction. After the rainy season, $NH_4Cl-P$ concentrations in sediments decreased whereas $NH_4F-P$ and $H_2SO_4-P$ concentrations increased. The redistribution of individual P fractions in sediments observed after rainy seasons were possibly due to the changing contribution of various sources of runoff and the variation in flow related particle size. Current estimation of P in bed sediments of the South Han River suggests a lower potential of internal P loading from sediments after the rainy season.

• 폴리머
• /
• 제32권6호
• /
• pp.549-554
• /
• 2008

분산중합법에 의해 고분자 미립자를 합성하기 위해 스티렌과 n-butylmethacrylate가 알루미나와 함께 중합되었다. 스티렌과 n-butylmethacrylate의 비는 3 : 1이었고, 입자안정제는 poly (N-vinyl pyrrolidon), 중합 개시제로는 2,2'-azobis(isobutyronitrile)를 커플링제는 3-methacryloxypropyl trimethoxysilane을, 분산매로 이소프로판올과 이온교환수를 70 : 30의 비로 사용하였다. TEM 사진을 통해 알루미나가 고분자 미립자에 분산되어 있음을 확인하였고 알루미나의 농도가 증가함에 따라 평균 입자경이 증가하였으며 입자경 분포는 감소되는 경향을 보였다. XRD 측정에 의해 알루미나의 농도 증가는 피크 강도와 2$\theta$값의 증가를 보였으며 TGA 측정으로 알루미나의 농도의 증가는 고분자 미립자의 내열성을 증가시킴을 알 수 있었다. 사용한 개시제의 반감기가 길수록 입자경은 감소하였고 입자인정제의 농도가 증가할수록 반응초기의 핵생성이 증가하여 입자경이 또한 감소함을 알 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권3호
• /
• pp.163-167
• /
• 2016

Inverter surge resistant enameled wire was prepared with an organic/inorganic hybrid nanocomposite, and the effect of ambient temperature on the insulation lifetime of the enameled wire in the form of twisted pair was studied by a withstanding voltage tester. The organic polymer was Polyesterimide-polyamideimide (EI/AI) and the inorganic material was a Nano-sized silica (average particle size : 15 nm). The enamel thickness was 50 μm and the ambient temperature was 100, 150, 200, and 250, respectively. Transmission electron microscopy (TEM) observation showed that Nano-sized Silica were evenly dispersed in EI/AI. There were many air gaps in a twisted pair, therefore, when voltage was applied to the twisted pair, enamel erosion took place in the air gap area because of partial discharge accordi, ng to Paschen’s law. As ambient temperature increased, insulation lifetime decreased according to Arrhenius relationship, which was explained by the increasing mobility of polymer chains in EI or AI. And insulation breakdown voltage value at 10 kHz was 1,864.5 sec (31.1 min), which is 1.9 times higher than at 20 kHz, 981.6 sec (16.4 min).

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.77-84
• /
• 2017

In this study, Poly-urethane acrylate (PUA) was synthesized by the reaction between Polycaprolactonetriol (PCLT) and Isophorone dissocyanate (IPDI) and hybridized with inorganic materials. Tetraethylortho silicate (TEOS) and nano clay (Closite 20A) were used as inorganic particles. For the hybridization of TEOS with PUA, sol-gel method is used, in which TEOS is made into spherical particle in the firsthand. In the case of Nano clay, hybridization is carried out through the dispersion as Nano clay has a layered structure. The solution of PUA hybrid was made into a film after UV curing and its thermo and electrical properties were measured. The experimental analysis and result demonstrate that the PUA hybrid shows an improved thermal properties and lower dielectric constant than that of the non-hybrid PUA. The trend of improved properties was different depending on structure of inorganic materials.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.107-114
• /
• 2016

Terra Alba Wallpaper was manufactured by coating inorganic terra alba paint on white base paper, and the surface of the coated layers were microscopically observed. Eco Terra Alba used the functional wall paper in this study was prepared by mixing inorganic Terra Alba and calcium carbonate. Terra Alba showed particle shape. The concentration of inorganic components, pH, and the viscosity of the coating solution were 92.0%, 7.82, 1286 cPs, respectively. The bar coater whit No 3 wire resulted in the least thickness of wet coating layer and coating thickness such $22.5{\mu}m$ with covered all the surface. Bar coater with No. 12 wire leaded to $48.4{\mu}m$ thickness. The coating layers above $43{\mu}m$ thickness showed the cracks on the wall paper surface after coating.

• 환경위생공학
• /
• 제22권1호
• /
• pp.17-27
• /
• 2007

This study was conducted the adsorption experiment way of organic wastewater (BOD, COD, TOC, T-N, T-P) by changing the carbonization temperature and the size of adsorbent to examine the adsorption capacity of Korean traditional charcoal which has similar characteristics to activated carbon of organic pollutants. Also, it was performed the basic experiment for pH and inorganic materials. As a result of observing Korean traditional charcoal with has the greatest inorganic contents which are the important factor of chemical adsorption. As the carbonization temperature was better high temperature charcoal than law temperature charcoal to adsorption capacity of pollutant and as the particle was minute (D size : $3.35mm{\sim}2.0mm$), it was most effective. The result of adsorption experiment of organic wastewater show that the elimination ratio of pollutants by bamboo high temperature charcoal was found as BOD(82.1%), COD(91.7%), TOC(52.4%), T-N(66.6%), T-P(83.2%) and it has most excellent adsorption capacity of organic pollutants.