• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.230-239
• /
• 2004

Using our PM2.5 and PM10 concentration data obtained from Seoul and Busan during winter 2002, we conducted comparative analysis on the role of inorganic ions in constituting airborne particles in two distinctive urban areas. Whereas the mass concentration of fine particle was more significant in Seoul, no such pattern was found in Busan. In addition, when the major components were compared between different particle fractions and between different sites, clear pattern was apparent between those. Although the major components of fine particles were generally compatible each other ($NH{_4}^+$, $NO{_3}^-$, and NSSS), those of coarse fractions were clearly distinguished. Although anthropogenic signatures were still important in Seoul, the influence of oceanic sources was clear in coarse fraction of Busan ($Cl^-$ and $Na^+$). Detailed statistical analysis of our data consistently supports the importance of different source processes between particle modes and source processes.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.423-435
• /
• 2014

Verifying the similarity of environmental characteristics between an artificial impact site and a preserved or reference site is necessary to quantitatively and qualitatively evaluate the environmental impact of mining activity. Although an impact site (BIS station) and a preserved site (called KOMO station) that have been selected in the Korea manganese nodule contract area may share similar environmental characteristics, similarities in terms of the water column environment between both sites has not been investigated. In this study, we compared the chemical properties of the water columns and sinking particle fluxes between BIS and KOMO stations through two observations (August 2011 and September 2012). Additionally, we observed particle fluxes at the KOMO station for five years (July 2003~July 2008) to understand long-term natural variability. Vertical distributions of water column properties such as dissolved oxygen, inorganic nutrients (N, P, Si), total organic carbon below surface layer (within the depth range of 200 m) were not considerably different between the two sites. Especially, values of water column parameters in the abyssopelagic zone from 4000 m to bottom layer (~5000 m) were very similar between the BIS and KOMO sites. Sinking particle fluxes from the two sites also showed similar seasonality. However, natural variation of particle flux at the KOMO site varied from 3.5 to $129.9mg\;m^{-2}day^{-1}$, with a distinct temporal variation originating from ENSO events (almost forty times higher than a minimum value). These results could provide valuable information to more exactly evaluate the environmental impact of mining activity on water columns.

• Korean Journal of Soil Science and Fertilizer
• /
• v.12 no.4
• /
• pp.179-187
• /
• 1980

1) Soils (volcanic ash and muck) were fractionated into particle-size separates (200 - 20, 20 - 2, 2 - 0.5 and finer than $0.5{\mu}$ in diamter), and of which the silt fraction was further fractionated into specific gravity separates (more than 2.0, 2.0 - 1.7, 1.7 - 1.4 and less than 1.4 in $g/cc^3$). And total organic and inorganic phosphorus in the separates were determined. 2) The amounts of total, organic and inorganic phosphorus distributed in the particle-size separates were as follows fine clay > coarse clay > silt > fine sand fraction. The increase rate in the amounts of phosphorus was great in the separates finer than $20{\mu}$, and greatest in the fine clay fraction. 3) The amounts of total, oganic and inorganic phosphorus distributed in the specific gravity separates were as follows: 2.0 - 1.7 > 1.7 - 1.4 > heavier than 2.0 fraction. The increase rate in the amounts of phosphorus was in the following order 2.0 - 1.7 > 1.7 - 1.4 > heavier than 2.0 fraction. 4) Distribution of carbon, amorphous aluminum and free iron oxides in the particle-size separates and the specific gravity separates were examined, and the distribution and the formes of organo-minera1 complexes in the separates were discussed to shed light on the factors affecting the distribution of phosphorous into the separates. And it was estimated that there was close relation among the distribution of organic and inorganic phosphorus, and the distribution and the formes of organo-minera1 complexes.

• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.48-56
• /
• 2016

Improvement of heat sink technology related to the continuous implementation performance and extension of device-life in circumstance of easy heating and more compact space has been becoming more important issue as multi-functional integration and miniaturization trend of electronic gadgets and products has been generalized. In this study, it purposed to minimize of decline of the heat diffusivity by gluing polymer through compounding of inorganic particles which have thermal conductive properties. We used NH-9300 as base resin and used inorganic fillers such as silicon carbide(SiC), aluminum nitride(AlN), and boron nitride(BN) to improve heat diffusivity. After making film which was made from 100 part of acrylic resin mixed hardener(1.0 part more or less) with inorganic particles. The film was matured at $80^{\circ}C$ for 24h. Diffusivity were tested according to sorts of particles and density of particles as well as size and structure of particle to improve the effect of heat sink in view of morphology assessing diffusivity by LFA(Netzsch/LFA 447 Nano Flash) and adhesion strength by UTM(Universal Testing Machine). The correlation between diffusivity of pure inorganic particles and composite as well as the relation between density and morphology of inorganic particles has been studied. The study related morphology showed that globular type had superior diffusivity at low density of 25% but on the contarary globular type was inferior to non-globular type at high density of 80%.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.2
• /
• pp.146-154
• /
• 2002

To assess the adsorption and removal mechanism of dissolved inorganic nutrients in seawater by scattering yellow loess, a laboratory experiment was conducted for the change of nutrient concentration in seawater during the course of time depending on particle size and scattered concentration of the yellow loess. Twenty four hours after the addition of yellow loess in the size range of 0 $\mu$m to 500 $\mu$m in seawater, the removal rate of dissolved inorganic phosphorus (DIP) was increased with increasing amount of yellow loess. There was little difference among the removal rates depending on the size of yellow loess. On average, $26\%$ of dissolved inorganic silicate was reduced for the same period. No greate difference among the removal rate depending on both size and amount of yellow loess was found. Our results suggested that the removal mechanism of DU seemed to be associated with mostly the chemical bond with iron. More than $99\%$ of initial DU concentration was likely to be removed by this mechanism. In the case of inorganic dissolved silicate, the removal mechanism was likely to be attributed to a cation exchange between the yellow loess and seawater.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.622-627
• /
• 2013

Colloidal silica is used in various industrial products such as chemical mechanical polishing slurry for planarization of silicon and sapphire wafer, organic-inorganic hybrid coatings, binder of investment casting, etc. An accurate determination of particle size and dispersion stability of silica sol is demanded because it has a strong influence on surface of wafer, film of coatings or bulks having mechanical, chemical and optical properties. The study herein is discussed on the effect of measurement results of average particle size, sol viscosity and electrophoretic mobility of particle according to the volume fraction of eight types of silica sol with different size and surface properties of silica particles which are presented by the manufacturer. The measured particle size and the mobility of these sol were changed by volume fraction or particle size due to highly active surface of silica particle and change of concentration of counter ion by dilution of silica sol. While in case the measured sizes of small particles less than 60 nm are increased with increasing volume fraction, the measured sizes of larger particles than 60 nm are slightly decreased. The mobility of small particle such as 12 nm are decreased with increase of viscosity. However, the mobility of 100 nm particles under 0.048 volume fraction are increased with increasing volume fraction and then decreased over higher volume fraction.

• Journal of the Korean Ceramic Society
• /
• v.52 no.4
• /
• pp.248-252
• /
• 2015

Natural materials often have unique mechanical properties, such as the hierarchical structure of nacre formed through mineral bridges or asperities created between an inorganic particle and a natural-layer surface. As these asperities produce an exceptional shear resistance, in this study, we aimed to emulate the natural structure of nacre by synthesizing inorganic asperities and mineral bridges with different temperatures in the range of $1100-1300^{\circ}C$ and clay contents from 10 - 50 wt%. Following the infiltration of methyl methacrylate, we measured the mechanical properties to assess whether they were improved by the asperities. It was confirmed that the asperities improved the bending strength by 10%, and the anchoring effect was observed on the fracture surface.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04a
• /
• pp.1-6
• /
• 1999

A study was made to determine the effect of plastic pigment on the coating structure and printability of coated paper. Three basic plastic pigments were investigated such as solid-bead type of plastic pigment, binder type of plastic pigment and hollow type of plastic pigment. In the systems investigated, it was observed that particle shape and structure of plastic pigment had influenced on the rheology of coating color, the state of packing, and the properties of coated paper. The materials investigated were restricted to plastic pigments commonly uesd in paper coating formualtion. Inorganic pigments used in this research were kaolin clay which is platelets and calcium carbonate which is rhombic. Three kinds of plastic pigments were blended in the color made up with two inorganic pigments, respectively. The combination of pigments were carried out (1) to determined the effect of paticle structure of plastic pigment on the state of dispersion of coating color, (2) to observe the effect of temperature of calender on the property of coated paper prepared with plastic pigment. The data indicated that binder and hollow type of plastic pigment had the best results on improving the properties of coated paper such as paper gloss, opacity and air permeability ect. and solid-bead type of plastic pigment in the next place.

• Korea-Australia Rheology Journal
• /
• v.18 no.2
• /
• pp.103-107
• /
• 2006

Organic-inorganic composite of polyaniline and barium titanate (PANI-$BaTiO_3$) was synthesized via an in-situ oxidation polymerization of aniline in the presence of barium titanate ($BaTiO_3$) nanoparticles dispersed in an acidic medium. Barium titanate has large electric resistance and relatively high dielectric constant which is one of the essential properties for its electrorheological (ER) applications. The microstructure and composition of the obtained PANI/$BaTiO_3$ composite were characterized by SEM, FT-IR and XRD. In addition, we also employed a rotational rheometer to investigate the rheological performance of the ER fluids based on both pure PANI particle and PANI/$BaTiO_3$ composite. It was found that the composite materials possess much higher yield stresses than the pristine PANI due to unique dielectric properties of the inorganic $BaTiO_3$ particles. Finally, we also examined dynamic yield stress by analyzing its extrapolated yield stress data as a function of electric field strengths. Using the critical electric field strengths deduced, we further found that the universal yield stress equation collapses their data onto a single curve.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.1
• /
• pp.45-50
• /
• 2011

Nonclassical pathway of crystallization has been utilized to modify the properties and morphologies of inorganic and organic/inorganic materials. In here, the polymer-directed crystallization method has been applied to the pharmaceutical active ingredient to assess the applicability for as a particle engineering tool. The polymer-directed crystallization was successful to modifying the crystal size, habit and morphology, but it was not effective to discover the novel polymorphs of Sibutramine (SB). SB was selected as a model drug and polyacrylic acid (PAA), polyethylene imine (PEI) and chitosan (CHI) were added as a crystallization pathway modifier. SB was crystallized via drowning crystallization using methanol or ethanol as a solvent and water as a non-solvent. The significant interactions between polymer and the drug were confirmed by measuring the solubility of the drug in presence of polymer during the crystallization. The crystal forms of SB are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and optical microscope (OM). The polymer-directed crystallization seems to be able to modify the crystal properties of pharmaceutical active ingredient, which is critical in determining the bioavailability, processability, and stability.