• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.89-92
• /
• 1999

The purpose of this study is to evaluate the capability to use with cement admixture materials because Paper Sludge Ash consists of Si, Ca and Al which are chief content in Pozzolan. For the derivation of Pozzolanic reaction in Paper Sludge Ash, it is measured compressive strength on cement mortar which is replaced mixing of Paper Sludge Ash and inorganic admixture ; ie, gypsum, lime and slaked lime, regularly. In the result of test, the strength decrease remarkably when cement is only replaced with Paper Sludge Ash, but the strength is almost equal when cement is replaced with Paper Sludge Ash is mixed with inorganic admixture material in proportions of 5~15%. Consequently, It is possible to use Paper Sluge Ash with admixture materials of cement.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.96-101
• /
• 2005

Thin-film humidity sensors were prepared using inorganic/organic hybrid polyelectrolytes, which were prepared from the sol-gel reaction of copolymers of [2-(methacryloyloxy)ethyl]dimethylpropylammonium bromide (MEPAB), n-butyl methacrylate (BMA), and 3-(trimethoxysilyl)propyl methacrylate (TSPM) with tetraethyl ortho-silicate (TEOS). The humidity-sensitive polyelectrolytes were composed of the copolymers having the following mole ratios of MEPAB, BMA, and TSPM: 60/30/10, 55/30/15, and 50/30/20. We found that the impedance varied with the content of MEPAB or TEOS; it ranged from $10^{7} to 10^{3}\Omega$ between 20 and $95\%$ relative humidity, which is the range required for a humidity sensor operating at ambient humidity. In addition we investigated a number of characteristics of these humidity sensors, such as their hysteresis, response time, temperature dependence, frequency dependence, water durability, and long-term stability.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.316-316
• /
• 2006

The preparation of an organic/inorganic polymer hybrid from a novolac derivatives is described. The hybrid was prepared by the acid-catalyzed solgel reaction of phenyl-trimethoxysilane (PhTMOS) in the presence of anisole novolac. The resulting film was transparent and showed a high heat stability. The dispersion of two components might be due to the utilization of the p-p interaction between the phenyl ring of the silica matrix and that of novolac. This makes it possible to prepare a hybrid glass having a highly content of novolac derivatives.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.235-236
• /
• 2011

This study analyzed flowing and strength properties of mortar depending to fine aggregate types and replacement ratio by using blast furnace slag, red mud, and silica fume that are industrial by products. The findings showed that higher replacement level of fine aggregate increased air content while decreased table flow. In addition, compressive strength showed that the higher replacement level was regardless of fine aggregate types, the lower strength became. Mortar substituted by the dredged sand showed high strength.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.576-582
• /
• 2000

Two type of expanding cement generally referred to as CSA with Hauyne(3CaO 3Al2O3 CaSO4) and Quick lime(CaO). Hauyne is formed to ettringite when there are presented with CaO and CaSO4, and CaO reacts wtih water to form Ca(OH)2. REcently, the mechanism of compensation and expand mortar or concrete tend to same and it has been used improving on its shrink property. The volume of cement paste varies with its water content shrink with drying and re-wetting. Concrete and mortar works are required shrinking compensation and expansion properties to reduce of potential crack. The use of expansion cement may improve on its shrinking volume changes. CSA dosages for shrinking compensation limited by cement weight, but obtained difference expansion rate with varied W/C or inorganic admixture. This paper studies expansion rate according to expansion cement dosages, water and inorganic admixtures as Silica fume. Therefor, the expansion factor has to considered before the application.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.89-90
• /
• 2012

This study analyzed and compared the flowing and strength properties of mortar depending on the different fine aggregate replacement ratios and whether or not the mixing of PVA fiber was applied. blast furnace slag, red mud, and silica fume that are industrial by-products were used for the analysis. The findings showed that higher replacement level of fine aggregate increased air content while decreasing the table flow. In addition, in case of the compressive strength, Plain mortar and PVA fiber with the replacement ratios of 15% and 30%, respectively showed the greatest strength development.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.157-160
• /
• 2005

The purpose of this study is to efficiently treat the sewage sludge discharged from sewage treatment plants and evaluate the feasibility of the manufacture of lightweight aggregates(LWA) using a large quantity of sewage sludge and inorganic waste binder ;f1y-ash, waste-stone, tailing, phosphogypsum. Then they were burned in different soak temperatures from 1190$^{circ}C$ to 1290$^{circ}C$ with fixed soak time and heating rate at 5 minutes and 20$^{circ}C$/min respectively in order to produce lightweight aggregate (LWA). Experiment were generated to evaluate the quality of LWA as well as the relationship between burning condition and product's quality.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.731-734
• /
• 2004

Admixture compounds for reducing setting time and accelerating early strength development of redispersible polymer powder-modified mortars were made by mixing various inorganic accelerating inorganic materials. Redispersible polymer powder-modified mortars are prepared with various accelerator contents, and it was tested for setting time, flexural and compressive strengths. As a result, the accelerators contribute to strength development of the mortars in the early curing age of 12h or less. In the viewpoint of early strength development of redispersible polymer powder-modified mortars, an accelerator content of $20\%$ is recommended.

• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.298-301
• /
• 2019

This paper details the synthesis of α-FeOOH (goethite) rods through the reaction of iron (III) nitrate with KOH as a strong base, and shape control of the particles for use as a yellow inorganic pigment. The crystal phase of the α-FeOOH crystal with OH content according to the addition of KOH and the change in morphology were investigated. The optical properties varied with the aspect ratios, and the yellowness increased with increasing aspect ratio. However, the enhanced chromaticity characteristics reversed beyond a certain critical aspect ratio. Thus, the relative optimal aspect ratio of the α-FeOOH rods as a vivid yellow inorganic pigment was derived. The morphology and coloration of the prepared rods were investigated in detail using X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis spectroscopy, and CIE Lab color parameter measurements.

• 한국토양비료학회지
• /
• 제48권1호
• /
• pp.22-29
• /
• 2015

The objectives of this study were to monitor the changes in soil solution nutrients and to evaluate their effect on rice uptake and yield. The changes of chemical characteristics of paddy soil solution were examined from the 58th fertilization experiment in which the continuous rice cropping experiment started in 1954 at the National Academy of Agricultural Science. The treatments were no fertilization (No fert.), inorganic fertilization (NPK), inorganic fertilizer plus rice straw compost (NPKC) and inorganic fertilizer plus silicate and lime fertilizer as a soil amendment (NPKCLS). The fertilizers were added at rates of standard fertilizer application rate in which nitrogen (N), phosphate ($P_2O_5$), potassium ($K_2O$), and sililcate ($SiO_2$) were applied at rates of $75{\sim}150kg\;ha^{-1}$, $70{\sim}86kg\;ha^{-1}$, $75{\sim}86kg\;ha^{-1}$, and $7.5Mg\;ha^{-1}$ respectively and lime was applied to neutralize soil acidity until 6.5. Average Electrical Conductivity (EC) of soil solution in NPKCLS and NPKC ranged from 1.16 to $2.00dS\;m^{-1}$. The $NH{_4}^+$ and $K^+$ levels in NPKCLS and NPKC were higher than that of the other treatments, due to high supply power of rice straw compost. The content of $H_3SiO{_4}^-$ was higher in NPKCLS because of silicate application. The dominant ions in soil solution were $Ca^{2+}$, $Mg^{2+}$ and $Na^+$ among cations and $HCO{_3}^-$, $SO{_4}^{2-}$, and $Cl^-$ among anions in all treatments. The continuous application of inorganic fertilizers plus rice straw compost (NPKC) and silicate fertilizer (NPKCLS) led to the changes of various chemical composition in soil solutions. Also, they had a significant impact on the improvement of rice inorganic uptake and grain yield. Especially, inorganic uptake by rice in NPKC and NPKCLS significantly increased than those in NPK plot; 14~46% for T-N, 32~36% for P, 43~57% for K, and 45~77% for Si. Therefore, the combined application of inorganic fertilizers with organic compost as a soil amendment is considered as the best fertilization practice in the continuous rice cropping for the improvement of crop productivity and soil fertility.