• 제목/요약/키워드: inorganic N

검색결과 885건 처리시간 0.025초

요소(尿素)(Urea)를 시용(施用)한 초지(草地)의 토양단면(土壤斷面)에서 무기태질소(無機態窒素) 함량(含量)의 계절적(季節的) 변화 (Seasonal Change in Inorganic Nitrogen Content in the Soil Profile of Urea-Fertilized Grassland)

  • 윤순강;유순호
    • 한국토양비료학회지
    • /
    • 제24권3호
    • /
    • pp.171-176
    • /
    • 1991
  • 요소(urea)를 시용한 초지의 토양단면에서 무기태질소의 계절적 함량변화를 조사하기 위하여 질소 시용수준(施用水準)을 0, 14, 28 kg/10a로 하고 목초를 재배하면서 봄(5.26), 여름(7.27), 가을(10.18)철에 토양시료를 토양깊이 100cm 까지 20cm 간격으로 채취하여 분석(分析), 검토(檢討)한 결과는 다음과 같다. 1. 봄 철에 질소 무시용구에서는 $NH_4-N$ 함량이 높았으나 14, 28 kg N/10a 처리에서는 $NO_3-N$ 함량이 증가(增加)되었고 $NH_4-N$, $NO_3-N$ 함량은 토양깊이가 깊을수록 모두 감소되는 경향을 보였다. 2. 여름 철 토양 중 $NO_3-N$ 함량(含量)은 0 N < 14 N <28 N 순으로 증가되었고 28 N 처리에서는 토양중 평균 $NO_3-N$ 함량이 42 ppm였다. 3. 가을 철에는 $NH_4-N$ 함량은 전 처리에서 여름 철과 큰 차이가 없었으나 $NO_3-N$ 함량은 여름 철에 비하여 크게 감소(減少)되어서 14 N, 28 N 처리에서 각각 7, 14 ppm 이하로 낮아졌다. 4. 토양 중 전질소 함량은 봄 철에 토양깊이 0~20cm에서 0 N에 비하여 28 N 처리에서 0.042% 낮았으며 전체적으로는 0 N과 28 N 처리 사이에 차이가 적었다. 그러나 토양 전질소(全窒素) 함량에 대한 무기태질소(無機態窒素) 함량 비율은 0 N과 28 N 처리 간에 차이가 컸는데 여름 철에 28 N 처리의 토양깊이 40~100cm에서 무기태질소(無機態窒素) 함량비율은 0 N 처리에 비하여 크게 증가(增加)되었으며 특히 토양깊이 80~100cm에서는 0 N에 비하여 2배 이상 증가되었다.

  • PDF

MBOD법에 의한 만경강 수계의 조류성장잠재력 평가 (Evaluation of Algal Growth Potential in the Mangyeong River by MBOD method)

  • 김종구;김준우
    • 한국환경과학회지
    • /
    • 제13권9호
    • /
    • pp.807-817
    • /
    • 2004
  • The modified biochemical oxygen demand (MBOD) were conducted to evaluate the water quality and fertility in the Mangyeong river from november 2002 to april 2003. MBOD method was used to evaluate algal growth potentials and their limiting factors. MBOD depends on the amount of available inorganic nutrient and organic substrate during 5-day incubation in the dark condition at $20^{\circ}C.$ The MBOD assay depends on inorganic nutrients such as phosphorus and nitrogen as well as reduced carbon as called MBOD, MBOD-P, and MBOD-N, respectively. The concentration of pollutants were in the range of 3.08~48.36 mg/L for COD. The concentration of nutrients were in the range of 0.37~111.62 mg/L for dissolved inorganic nitrogen (DIN) and 0.00~1.03 mg/L for dissolved inorganic phosphorus (DIP). The results of MBOD bioassay showed that the MBOD, MBOD-P and MBOD-N values were 15~173 mg $O_2/L,$ 13~165 mg $O_2/L$ and 66~175 mg $O_2/L$ ranges, respectively. The MBOD values are found to be the highest in Iksan River and the lowest in Hari River throughout the Mangyeong River. The relationships of MBOD, MBOD-P and MBOD-N in MBOD method were generally found in MBOD$\risingdotseq$ MBOD-P$\risingdotseq$MBOD-N. But the result of Gosan was appeared to MBOD$\risingdotseq$MBOD-N > MBOD-P. The MBOD-N value was higher 3 to 5 times than the MBOD-P value in the Gosan station. The algal growth potentials expressed as the concentration of chlorophyll-a were maximum 20 times more than algal biomass in the water column.

분말 타겟을 이용한 플라스틱 기판 상의 ITO 박막 제조에 관한 연구 (A Study on the ITO Thin Films on Plastic Substrate Using by Powdery Targ)

  • 이재형;박용관;신재혁;신성호;박광자
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 D
    • /
    • pp.1683-1685
    • /
    • 1999
  • ITO films on plastic substrate were prepared by DC magnetron sputtering method using powdery target and their properties were investigated as a function of the deposition conditions. As the sputtering power and total pressure were higher, the resistivity of ITO films increased. The optical transmittance deteriorated with increasing sputtering power and thickness. As the total pressure increased, however, the optical transmittance improved at visible region of light. From these results, we could deposited ITO films with $8{\times}10^{-3}{\Omega}-cm$ of resistivity and 80% of transmittance at optimal conditions.

  • PDF

Effects of Dolomite and Oyster Shell on Nitrogen Processes in an Acidic Mine Soil Applied with Livestock Manure Compost

  • Yun, Seok-In;Seo, Dong-Hyuk;Kang, Ho Sang;Cheng, Hyocheng;Lee, Gunteak;Choi, Woo-Jung;Lee, Chang-Kyu;Jung, Mun Ho
    • 한국토양비료학회지
    • /
    • 제49권5호
    • /
    • pp.614-620
    • /
    • 2016
  • Mine soils are usually unfavorable for plant growth due to their acidic condition and low contents of organic matter and nutrients. To investigate the effect of organic material and lime on nitrogen processes in an acidic metal mine soil, we conducted an incubation experiment with treating livestock manure compost, dolomite, and oyster shell and measured soil pH, dehydrogenase activity, and concentration of soil inorganic N ($NH_4{^+}$ and $NO_3{^-}$). Compost increased not only soil inorganic N concentration, but also soil pH from 4.4 to 4.8 and dehydrogenase activity from 2.4 to $3.9{\mu}g\;TPF\;g^{-1}day^{-1}$. Applying lime with compost significantly (P<0.05) increased soil pH (5.9-6.4) and dehydrogenase activity ($4.3-7.0{\mu}g\;TPF\;g^{-1}day^{-1}$) compared with applying only compost. Here, the variation in dehydrogenase activity was significantly (P<0.05) correlated with that in soil pH. Soil inorganic N decreased with time by 14 days after treatment (DAT) due to N immobilization, but increased with time after 14 DAT. At 28 DAT, soil inorganic N was significantly (P<0.05) higher in the lime treatments than the only compost treatment. Especially the enhanced dehydrogenase activity in the lime treatments would increase soil inorganic N due to the favored mineralization of organic matter. Although compost and lime increased soil microbial biomass and enzyme activity, ammonia oxidation still proceeded slowly. We concluded that compost and lime in acidic mine soils could increase soil microbial activity and inorganic N concentration, but considerable ammonium could remain for a relatively long time.

Inorganic and Transition Metal Azides

  • Seok, Won-K.;Klapotke, Thomas M.
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권4호
    • /
    • pp.781-788
    • /
    • 2010
  • Experimental and theoretical studies show that all covalent azides possess a nonlinear azide group. They also rationalize this remarkable structural feature. We have seen that the most important non-covalent contributions in the covalently bound azides system (X-N1-N2-N3) are the $\pi$-delocalization over the entire molecule and a strong negative hyperconjugation which donates electron density from the filled $\sigma$ (X-N1) orbital into the unfilled, antibonding $\pi^*$ (N2-N3) orbital. For transition metal azide complexes, a bent configuration and a small difference between the N-N bond lengths, generally the longer one being adjacent to the transition metal, were observed.

OLED 내구성에 미치는 무기/에폭시층 보호막의 영향 (The Effect of Passivation Film with Inorganic/Epoxy Layers on Life Time Characteristics of OLED Device)

  • 임정아;주성후;양재웅
    • 한국표면공학회지
    • /
    • 제42권6호
    • /
    • pp.287-293
    • /
    • 2009
  • The passivation films with epoxy layer on LiF, $SiN_x$ and LiF/$SiN_x$ inorganic layer were fabricated on OLED to protect device from the direct damage of $O_2$ and $H_2O$ and to apply for a buffer layer between OLED device and passivation multi-layer with organic/inorganic hybrid structure as to diminish the thermal stress and expansion. Red OLED doped with 1 vol.% Rubrene in $Alq_3$ was used as a basic device. The device structure was multi-layer of ITO(150 nm) / ELM200_HIL(50 nm) / ELM002_HTL(30 nm) / $Alq_3$: 1 vol.% Rubrene(30 nm) / $Alq_3$(30 nm) / LiF(0.7 nm) / Al(100 nm). LiF/epoxy applied as a protective layer didn't contribute to the improvement of life time. While in case of $SiN_x$/epoxy, damage was done in the passivation process because of difference in heat expansion between films which could occur during the formation of epoxy film. Using LiF/$SiN_x$/epoxy improved lifetime significantly without suffering damage in the process of forming films, therefore, the best structure of passivation film with inorganic/epoxy layers was LiF/$SiN_x$/E1.

유기-무기 페로브스카이트 복합소재의 고체-고체 상전이 (Solid-solid phase transitions of organic-inorganic perovskite hybrids)

  • 허영덕;김지현
    • 한국결정성장학회지
    • /
    • 제15권2호
    • /
    • pp.86-91
    • /
    • 2005
  • 층상 구조의 유기-무기 페로브스카이트 복합 소재 $(C_nH_{2n+1}NH_3)_2CuC1_4$ (n=6, 8, 10, 12)을 합성하였다. $(C_nH_{2n+1}NH_3)_2CuC1_4$ 화합물에서 긴 사슬의 양성자화된 알킬 암모늄 이온은 기울어진 이중층의 구조로 $CuCl_6$ 팔면체의 구석을 공유하고 있는 페로브스카이트형의 층들 사이에의 삽입되었다. 페로브스카이트 층상 화합물에서의 3개의 고체상을 HT-XRD와 DSC를 사용하여 조사하였다. $(C_nH_{2n+1}NH_3)_2CuC1_4$ 화합물은 단계적인 층간거리의 증가와 함께 고체-고체 상전이 현상을 보여준다 3개의 다른 구조는 긴 사슬의 양성자화된 알킬 암모늄 이온의 형태 변화로 설명하였다.

점적관수시 관비와 표면시비된 중질소 표지요소의 행동비교 (Distribution of Inorganic N from Fertigated and Broadcast-applied 15N-Urea along Drip Irrigation Domain)

  • 류순호;정강호;노희명;최우정
    • 한국토양비료학회지
    • /
    • 제34권4호
    • /
    • pp.292-301
    • /
    • 2001
  • 본 연구는 점적관수시 토양수분 영역의 변화를 측정하고 이에 따른 관비와 표면시비로 투입된 중질소 표지요소에서 유래한 무기태 질소의 분포 양식을 비교하기 위하여 수행되었다. 이를 위해 비닐하우스 내에서 6주간 포트실험을 수행하였다. 관비구는 $117mg\;N\;L^{-1}$ 수준으로 4주간 1.41 g N 을 투입하였으며 표면시비구는 토양 5 kg에 1.81 g N 을 고루 섞어 표면 (3 cm) 에 충진하였다. 관개는 -50 kPa의 토양 수분 장력을 관수점으로 하여 유속 $0.5L\;hr^{-1}$로 공급하였다. 질소 동위원소비의 분석결과 관비구의 경우 투입된 1.41g N 중 89% 에 해당하는 1.25 g N 이 토양에서 무기태 질소로 회수되었으며 표면시비구의 경우 1.87 g N 중 단지 51% 만이 회수되었다. 이는 낮은 농도의 관비로 공급된 요소가 습윤구역에 분포하여 가수분해, 질산화가 일어나는데 반해 표면시비는 고농도로 집적된 요소가 지표에서 가수분해되어 암모니아 휘산이 많이 일어나기 때문이다. 관비로 공급된 요소에서 유래한 무기태 질소의 60%가 0-10 cm 깊이에 있었으며 깊어짐에 따라 농도가 점차 감소하였다. 반면 표면시비된 요소에서 유래한 무기태 질소는 91%가 지표에 집중되어 10 cm 밑으로는 거의 발견되지 않았다. 관비의 경우 요소에서 유래한 무기태 질소의 99%가 질산태 질소로 회수된 반면 표면시비된 요소에서 유래한 무기태 질소는 38%가 암모늄태로 남아있었으며 대부분 습윤구역 바깥쪽 표면에서 회수되었다. 이는 수분이동이 적고 건습이 반복되는 지표, 특히 습윤구역 외부에 투입된 요소의 경우 이동성이 적으며 질산화가 지연되기 때문이다. 본 실험의 결과로 보아 관비로 요소를 투입할 때 암모니아 휘산에 의한 질소의 손실을 최소화할 수 있었으며 발견된 요소유래 무기태 질소의 분포로 보아 식물이 흡수하기 용이한 무기태 특히 질산태 질소를 지속적으로 공급할 수 있었다.

  • PDF

무기바인더의 내수강도 발현에 미치는 식물성 왁스의 영향 (Influence of vegetable wax on the moisture strength development of inorganic binder)

  • 배민아;김경호;이만식;백재호
    • 한국산학기술학회논문지
    • /
    • 제21권10호
    • /
    • pp.574-580
    • /
    • 2020
  • 무기바인더는 저온에서 경화가 가능하며, 유해가스를 배출하지 않는 친환경성과 중자 조형 시 성형된 제품의 결함이 작다는 장점으로 인해 주조 산업에 적용하고자 관련 연구가 급속도로 진행되고 있다. 그러나 실리케이트(SiO2-Na2O)를 주성분으로 하는 무기바인더는 실리케이트 특유의 흡습성으로 인해 공기 중 수분을 흡습하여 결합력이 약해져 주형의 강도가 급격히 감소하는 문제가 있다. 특히 주강 주조에 사용되는 사형 주형의 경우 알루미늄 주조보다 높은 주입 온도로 인해 고강도의 주물 특성을 요구한다. 이에 본 연구에서는 무기바인더의 강도와 흡습성을 개선하기 위해 에스테르기를 함유하는 왁스를 이용하여 이를 효율적으로 합성하는 방법을 연구하였다. 또한 합성된 무기바인더의 특성을 XRF와 TGA를 통해 확인하고, 일반강도와 내수강도 평가를 진행하여 주형의 강도 개선 여부를 확인하였다. 그 결과 에스테르기를 함유하는 왁스를 포함한 무기바인더의 경우 일반 강도가 증가하였으며, 특히 내수강도가 118 N/㎠에서 216 N/㎠까지 증가하여 약 55 %의 내수강도 개선 효과를 확인하였다. 또한 실제 주강 제품을 제작한 뒤 주조를 통해 우수한 주조 특성을 확인하였다.

카올린으로부터 Si-Al 탄화물의 합성 및 Si$_3$N$_4$ 결합 소결 특성 (Synthesis of Si-Al Carbonates from Kaolin and Sintering Characteristics by Reaction Bonding Si3N4)

  • 백용혁;김영구;한창;권양호
    • 한국세라믹학회지
    • /
    • 제28권9호
    • /
    • pp.667-674
    • /
    • 1991
  • In this study, Kaolin was carbonized at 1300~175$0^{\circ}C$ and its constituent mineral change was investigated. Carbonized kaolin at 1$650^{\circ}C$ was mixed with metallic silicon, formed and nitrified at 135$0^{\circ}C$ in N2-NH3 atmosphere. Properties of this product such as porosity, bulk density, MOR, nitrization rate and oxidation resistence were measured, and its mineralogical changes were investigated by XRD. The results were as follows; 1) $\beta$-SiC was initially synthesized at 150$0^{\circ}C$, and its amount was continuously increased with reaction temperature to 1$700^{\circ}C$. 2) At 1$600^{\circ}C$, mullite was rapidly decomposed and the amounts of $\beta$-SiC and $\alpha$-Al2O3 were increased simultaneously. 3) By adding alkali to kaolin, the decomposition temperature of mullite was dropped approximately 10$0^{\circ}C$, but the amount of $\alpha$-SiC was increased. 4) The highest values of their nitrization rate and MOR were obtained at the specimen of 35 wt% metallic silicon in nitrization reaction. 5) It seems that increment of $\alpha$-Si3N4 and $\alpha$-Al2O3 phase during nitrization was due to the decomposition of Al4SiC4 existed in carbonized kaolin. 6) Si3N4 bonded SiC-Al2O3 composite were fabricated from kaolin at relatively low temperature (135$0^{\circ}C$).

  • PDF