• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제3회 금형가공 심포지엄
• /
• pp.33-38
• /
• 2004

In order to improve the quality of the sheared surface in cutting of inner structure bonded sheet metal the cut-off operation is mainly investigated, which is the typical shearing process in sheet metal forming technology. The sandwich sheet metals considered have inner structure which is constructed in the form of crimped expanded metal and woven metal. The inner structure is bonded between solid sheet by resistance welding or adhesive bonding. The shearing process is visualized by the computer vision system installed in front of the cut-off die and the sheared surface is measured and quantitatively compared with the help of the optical microscope after cut-off operation. From test results we found that the influence of sheared position can be observed and explained clearly and this result can be utilized to get the better sheared surface.

• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.69-76
• /
• 2008

Inner diameter of bearing race is automatically measured by complete inspection system after grinding process. Contact type three points supporting method is widely applied to automatic inner diameter measurement because of its excellent stability. However, the geometric consideration regarding three points supporting method is not sufficient. In this study, the error equation from geometric error analysis of three points supporting method is found. The effect of factors in the error equation is also investigated. The error equation is linear for difference of diameter in sample and master on range of tolerance. An error becomes more and more larger, when the distance of two supporting balls or the diameter of supporting ball are increased. In the result, some considerations are proposed for measurement of inner diameter by the three points supporting method.

• 센서학회지
• /
• 제28권3호
• /
• pp.164-170
• /
• 2019

In this paper, a lane detection and tracking algorithm based on vision sensors and employing a robust filter for inner edge detection is proposed for developing a lane departure warning system (LDWS). The lateral offset value was precisely calculated by applying the proposed filter for inner edge detection in the region of interest. The proposed algorithm was subsequently compared with an existing algorithm having lateral offset-based warning alarm occurrence time, and an average error of approximately 15ms was observed. Tests were also conducted to verify whether a warning alarm is generated when a driver departs from a lane, and an average accuracy of approximately 94% was observed. Additionally, the proposed LDWS was implemented as an embedded system, mounted on a test vehicle, and was made to travel for approximately 100km for obtaining experimental results. Obtained results indicate that the average lane detection rates at day time and night time are approximately 97% and 96%, respectively. Furthermore, the processing time of the embedded system is found to be approximately 12fps.

• Journal of Biosystems Engineering
• /
• 제27권4호
• /
• pp.341-348
• /
• 2002

Quality evaluation of red ginsengs is determined by outer shape and inner qualities. Especially, the inner qualities are main grading criteria. Currently, red ginsengs are classified into 3-grades; heaven, earth and good. The best heaven grade must not include inner holes and sponge tissues. This study was conducted to develop a red ginseng sorting system using x-ray image processing technique. Because of lens characteristic, gray values of the central region in the x-ray image are higher and gradually decreased towards the edge regions. This difference of gray values gives trouble in segmentation and detection of inner holes in red ginseng image, so preprocessing technique is necessary. The preprocessing was done by subtracting source image from an empty background image. But, simple subtraction was not quite appropriate because of too small contrast between inner holes and sound part. Scaled subtraction images were obtained by multiplying all gray values by some numbers. However this method could not help to set threshold value because the gray values of root part are generally lower than body part when red ginseng is exposed to the x-ray. To determine threshold value for detecting inner holes, an algorithm was developed by increasing overall gray values of less clear images.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.279-282
• /
• 2002

Here we introduce so called Reference code-weighted sum of all PN codes used in the system-. We do inner product operation between received PN code and Reference code rather than locally generated PN code in the receiver. Acquisition process can be accomplished by only one inner product during full period of PN code. It's essential innovation against present method which can be viewed successive hypothesis test by inner product for entire candidate PH codes set. Well -defined decision region makes it possible. We suggest the. criterion fur designing the decision region and find a condition for weight (coefficient) of Reference code.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3376-3382
• /
• 2014

전자내시경을 이용하여 양극처리된 알루미늄 실린더튜브 내면의 결함을 자동으로 검사하는 시스템을 개발하였다. 이 시스템은 크게 자동 결함검사 소프트웨어, 전자내시경 및 이송장치 등으로 구성되어 있다. 실험을 통하여 자동 결함검사의 최적검출 조건을 도출하여 실린더튜브 내면의 결함 검사에 적용한 결과 주요 결함 요소인 스크래치, 산화물, 라인, 웰드라인의 인식률을 99%로서 만족하였다. 자동 결함검사 시스템을 생산현장에 적용하면 기존의 육안 검사 시 작업자가 가지는 육체적인 피로도 줄여 작업효율을 증가시키며, 결함검출 자료를 바탕으로 제품의 품질을 향상시킬 수 있다.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.144-148
• /
• 2008

The size and surface effects on the magnetism of a fcc Fe (001) surface was investigated by performing firstprinciples calculations on 3, 5, 7, and 9 monolayers fcc Fe (001) single slabs with two different two-dimensional lattice constants, ${\alpha}=3.44{\AA}$ (System I) and 3.65 ${\AA}$ (System II), using the all-electron full-potential linearized augmented plane wave method within a generalized gradient approximation. The surface layers were coupled ferromagnetically to the subsurface layer in both systems. However, the magnetism of the inner layers was quite different from each other. While all the inner layers of System II were ferromagnetically coupled in the same way as the surface layer, the inner layers of System I showed a peculiar magnetism, bilayer antiferromagnetism. The calculated spin magnetic moments per Fe atom were approximately 2.7 and 2.9 ${\mu}_B$ at the surface for Systems I and II, respectively, due to the almost occupied Fe d-state being in the majority spin state and band narrowing. The spin orientations of System I were out-of-plane regardless of its thickness, whereas the orientation of System II changed from out-of-plane to in-plane with increasing thickness.

• 플랜트 저널
• /
• 제4권2호
• /
• pp.66-72
• /
• 2008

In this inquiry, I would suggest jet ventilation system for effective elimination of welding flaw at machinery material welding shop on plant and evaluate the airstream on inner space and property of welding flaw's density through the examination. We can know outer atmosphere inflows at the speed of about 0.05m/s from western entrance in case of stopping the jet ventilation system, but airstream is accumulated on entire space. At height of worker's breathing surface(Ground Level = 1.5 m, below of GL) and welding work center, density of welding flaw on upper part(GL = 12m) is appeared 4 times higher than outer atmosphere at surplus range besides nearby of western entrance. At operation of jet ventilation system, since the smooth air current transfer at inner space and exhaust effect the wind speed is maintained at 0.932 m/s at the point of height of worker's breathing surface on inner space and it's concluded about the working conditions have been better than before operation of jet ventilation system because of that results show that inner space density of welding flaw at height of worker's breathing surface is 40.5%, and in the work shop, it is 20.3% at upper part.

• 한국항해학회지
• /
• 제21권1호
• /
• pp.13-31
• /
• 1997

Being situated at the key point of northeast asia, the port of Inchon as an entrance to the captial city, Seoul is expected to play in marine transportation in Korean Pennisular on the verge of its reunification. In this thesis, inner-lock physical disstribution system of the port was analyzed, which treats more than 82% of total incoming and outgoing cargoes. The overall findings are as follows; 1. In thet viewpoint of physical distribution system of the port, it takes disadvantages of accessing to inner lock berth due to such natural restrictions as tides, passing the lock and so on. And insufficient port facilities as a whole, causes delay in quay-handling, transfer and storage, also facing with serious congestion in inland transport on the road. 2. It was revealed that the port facilities are insufficient yet in spite of its improved productivity by means of raising the effectiveness of port operation and of installing advanced cargo handling facilities. 3. In order to enhance the effectiveness of inner port physical distribution system , the improvement of lock facilities, expansionof port facilities and more effective terminal operating system are crucial. 4. To ensure the measures to solve the above problem, existent outer-lock ports such as Inchon Sourthern-port and Northern-port are necessary to be redeveloped more positively , otherwise a new port at outskirt of the city should be developed to ensure free connection to inland transportation.

• 정보저장시스템학회논문집
• /
• 제9권2호
• /
• pp.32-35
• /
• 2013

Nowadays, function related to anti-vibration and anti-shock of storage devices is required because of portability. Therefore, many hard disk drive (HDD) studies about external shock and vibration have been performed. Especially, many studies are performed with non-operational shock. Most studies have used the fixed condition between spindle system and base when they wanted to analyze dynamic behavior of inner parts in simulation. But spindle system has actually stiffness and damping coefficient. Maybe difference of value would be happened between fixed condition and spring condition. So, we measured FRF of spindle system to know stiffness and damping coefficient in HDD. And we studied on dynamic behavior of inner parts by using calculated stiffness and damping coefficient. As a result, we confirmed the difference as boundary condition of spindle system.