• 한국멀티미디어학회논문지
• /
• 제17권8호
• /
• pp.937-945
• /
• 2014

Multi-modal biometric system can use another biometric trait in the case of having deficiency at a biometric trait. It also has an advantage of improving the performance of personal identification by using multiple biometric traits, so studies on new biometric traits have continuously been performed. The inner face of finger is a relatively new biometric trait. It has two major features of knuckle lines and wrinkles, which can be used as discriminative features. This paper proposes a finger identification method based on displacement vector to effectively process some variation appeared in contactless hand image. At first, the proposed method produces displacement vectors, which are made by connecting corresponding points acquired by matching each pair of local block. It then recognize finger by measuring the similarity among all the detected displacement vectors. The experimental results using pubic CASIA hand image database show that the proposed method may be effectively applied to personal identification.

• ETRI Journal
• /
• 제25권2호
• /
• pp.144-147
• /
• 2003

We propose a new serial concatenation scheme for space-time and recursive convolutional codes, in which a space-time code is used as the outer code and a single recursive convolutional code as the inner code. We discuss previously proposed serial concatenation schemes employing multiple inner codes and compare them with the new one. The proposed method and the previous one with joint decoding, both performing a combined decoding of the simultaneous output signals from multiple antennas, give a large performance gain over the separate decoding method. In decoding complexity, the new concatenation scheme has a lower complexity compared with the multiple encoding/joint decoding scheme due to the use of the single inner code. Simulation results for a communication system with two transmit and one receive antennas in a quasi-static Rayleigh fading channel show that the proposed scheme outperforms the previous schemes.

• 전자공학회논문지
• /
• 제51권1호
• /
• pp.57-70
• /
• 2014

내적 암호화 방식은 비밀키와 암호문 사이에 파인 그레인 관계를 제공하는 암호학적 프리미티브이다. 본 논문은 완전한 속성 은닉 보호를 수행하는 새로운 IPE 방식을 제안한다. 제안한 IPE 방식은 합성 위수의 bilinear groups에 기반한다. 본 논문에서는 이중 암호화 시스템 체계를 사용하여 제안한 IPE의 완전한 속성 은닉 보호를 증명한다. 성능 분석에서 기존의 IPE 방식들과 제안한 IPE 방식의 연산량과 메모리 할당량을 비교한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.97-101
• /
• 1993

In this work, the imaginary part of the inner modulation transfer function of the cutting dynamics is introduced for tool wear monitoring. Time-series method is utilized to construct the generalthree dimensional cutting dynamics whose imaginary part of the inner modulation transfer funcition shows the proportionality to tool wear at the natural frequency of the machine tool dynamics. This modelis reduced to single-input single- output model without altering the proporitonality characteristics to tool wear and implemented to the dual computer system in which one computer performs measurement while the other calculates the imaginary part of the inner modulation transfer function of th cutting dynamics by the batchleast square method. The values of the imaginary part at the natural frequencyof the machine tool structure in the cutting direction are compared to the one calculated during machining with a brand new tool to decide the current stants of the tool. The experiments shows the relevance of the proposed concept.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.135-140
• /
• 2003

In this paper, we investigate the error performance of a serially concatenated system using a nonrecursive convolutional code as the outer code and a recursive QPSK space-time trellis code as the inner code on quasi-static and rapid Rayleigh fading channels. At the receiver, we consider iterative decoding based on the maximum a posteriori (MAP) algorithm. The performance is evaluated by means of computer simulations and it is shown that better error performance can be obtained by using low complexity outer and/or inner codes and the Euclidean distance criterion based recursive space-time inner codes. We also obtain new systems with large number of trasmit and/or receive antennas providing good error performance.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.100-106
• /
• 1996

Gerotor pumps and motors are widely used in lubrication and hydraulic actuator systems. Compared with internal gear pumps and motors, they have many advantages. However, the gerotor profiles have not been suff'lciently analyzed theoretically. Therefore, it is very difficult for designer to decide the specifications of the gemtor profiles, and calculation of flow rate and minimum distance of clearance in the contact point of inner and outer rotor is not yet confirmed. In this paper, when we design inner and outer rotor concurently, we have analyzed the gerotor profiles and displayed the calculated results such as flow rate, minimum distance between inner and outer rotor and gerotor profiles.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제20권1호
• /
• pp.51-56
• /
• 2016

This paper is devoted to evaluate the effect of bilingual mathematics learning of Mongolian students in the primary school of Inner Mongolia. The study used tests and examined 305 Mongolian students' math achievement from Mongolian school and 277 Mongolian students from Mongolian and Han mixed school, at the same time 301 students from Guangxi regular primary school for comparison. Multivariate statistical analysis shows that there is no significant difference between these students. The results showed that the implementation of bilingual mathematics education in Inner Mongolia have achieved the desired effect. The reasons leading to the observed results are analyzed. There is a long history of bilingual education in Inner Mongolia, so the bilingual education system is complete, and the bilingual teaching resources are relatively abundant, especially the mathematics term translation between Mongolian and Chinese is standardized and unified.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2003년도 정기총회 및 추계학술대회
• /
• pp.181-187
• /
• 2003

This study intends to make a counterproposal for re-building existing high-rise/high-dense buildings and for planlessly re-constructing multi-dwellings. Also, it proposes the plan instruction fur reconstruction by small collective housings through annexing parcels in the residence Inner area. This study can be summarized as below: (1) Remained site generated by site boundaries can be utilized by annexing two or more parcels. (2) Vacant lots between buildings can be utilized as building space or common space by small-sized annexation. (3) Bad effect of residential environment caused by simultaneous development of total blocks can be minimized. (4) Formation of site size and plane, which are advantageous to reconstruction, is available. (5) Accessibility to neighboring roads can increase. (6) Residents' participation in development can increase in economical and planning aspect. In order to utilize these planning instruction, residents' participation and improved public ownership system for parcel annexation are required.

• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.47-52
• /
• 2013

In the present study, the turbulent flow from an annular jet is investigated by using large eddy simulation. Particularly, the effect of the ratio of the inner and outer diameters is one of the main interests of this study. The instantaneous fields presented in this paper showed that behind the jet exit the backflow region, as well known in literatures, exists, and its detailed behavior depends on the ratio of the inner and outer diameters ($D_1/D_2$). The dependence on $D_1/D_2$ is attributed to the different shear layer development according to $D_1/D_2$. At small $D_1/D_2$, the development of the outer shear layer is similar to that from the circular jet. However, with increasing $D_1/D_2$, the interaction between the outer and inner shear layers becomes strong, resulting in fast transition to turbulence.

• 소성∙가공
• /
• 제19권7호
• /
• pp.405-410
• /
• 2010

Double layered tube that has been used for transportation and oil piping system is occasionally exposed to elevated temperature. The change in stress state at elevated temperature is important for the safe design of double layered tube. In this study, the variation of stress state for hydroformed double layered tube of which inner tube is stainless steel and outer tube is mild steel has been analytically analyzed. To characterize the thermal stress at elevated temperature, analytical model to provide thermal stresses between outer tube and inner tube was developed by using theories of elasticity and Lame equation. The feasibility of analytical model is verified by finite element analysis using ANSYS $CLASSIC^{TM}$, commercially available code. The variation of thermal stress at various thickness combination of inner and outer tube has also been investigated by proposed analytical model.