• Journal of the Korean Chemical Society
• /
• v.48 no.4
• /
• pp.351-357
• /
• 2004

We have investigated the intensity of Cu 510.6 nm emission line in see-through hollow cathode glow discharge (st-HCGD) for the development of medical Cu vapor laser. In order to acquire the stable plasma in st-HCGD cell at high current, several factors such as current, the length and the inner diameter of cathode tube, the shape of the tube, and the range of the sputtering range were tested. An optimum condition in our st-HCGD cell was obtained at 600 V, 700 mA, 2.3 Torr of Ar gas (100 SCCM), and 40 mm of tube with 4-11-4 mm type cathode design. Also, it was indirectly observed that temperature in the cell could reach more than $1,000{\circ}C$ since Cu cathode was melt at the current more than 700 mA (melting point of Cu, $1084{\circ}C$).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.130-137
• /
• 2017

Due to the economic growth and development of construction technology, a role of foundation to resist heavy loads has been increased. In this present study to improve the structural performance of reinforced concrete pile, the precast HPC pile reinforced with rebar and filling concrete was developed and the strength of pile was predicted based on the limit state design method. The safety of HPC pile strength was evaluated by comparing with the design values. The geometry of HPC pile is a decagon cross section with a maximum width of 500 mm and a minimum width of 475 mm, and the hollow head of pile thickness is 70 mm. The inner area of the hollow head part was made as the square ribbed shape presented in the limit state design code in order to achieve horizontal shear strength between pile concrete and filling concrete. From the shear test results, it was found that the stable shear strength were secured without abrupt failure until maximum load stage despite the shear cracks was found. Shear strength is 135% and 119% higher than that of design value calculated from limit state design code. The driving test results of HPC pile according to the presence of additional reinforcement showed the outstanding crack resistance against impact loads condition. From the bending test results the flexural load between PHC pile and HPC pile was 1.51 times and 1.48 times higher than that of the design flexural load of conventional PHC pile.

• Applied Microscopy
• /
• v.24 no.3
• /
• pp.1-9
• /
• 1994

Pardosa astrigera possessed eight eyes arranged in three rows on the frontal carapace. A pair of small anterior lateral eyes (ALE) flanked each side by an anterior median eyes (AME) lay along the anterior margin that was situated on the anterior row of clypeus. The anterior lateral eye was composed of cornea, vitreous body, and retina. Cornea was made up mainly of exocuticle lining the cuticle. Lens in anterior lateral eye was biconvex type which bulged into the cavity of the eyecup. Outer and inner central region of lens were approximately spherical with radius of curvature $5.6{\mu}m$ and $12.5{\mu}m$, respectly. Vitreous body formed a layer between the cuticular lens and retina. They formed biconcave shape. Retina of the anterior lateral eyes was composed of three types of cells: visual cells, glia cells, and pigment cells. The visual cells were unipolar neuron, as were the receptor of the posterior lateral eye. But cell body was unique to the anterior lateral eyes. They were giant cell, relatively a few in number, and under the layer of vitreous bodies. Each visual cell healed rhabdomeres for a short stretch beneath the cell body. Rhabdomes were irregulary pattern in retina and electron dense pigment granules scattered between the rhabdomes. Glia cell situated at the cell body of visual cell and glia cell process reached to rhabdomere portion. Below the rhabdome, tapetum were about $30{\mu}m$ distance from lens, which composed of 4-5 layers. It was about $25{\mu}m$ length that intermediate segment of distal portion of visual cell. Electron dense pigment granules between the intermediate segment were observed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.334-341
• /
• 2003

When the pressure tubes(f are in contact with the calandria tube(CT) in the pressurized heavy water reactor(PHWR), the temperature difference between inner and outer wall of W results in a thermal diffusion of hydrogen (deuterium) and hydride blisters are formed on the outer surface of PT. Because the hydride blisters and zirconium matrix are acoustically continuous, it is not easy to distinguish the blisters from the matrix with conventional ultrasonic method. An ultrasonic velocity ratio method was developed to detect small hydride blisters on the zirconium pressure tube. Hydride blisters were grown in the PT specimen using a steady state thermal diffusion device. The flight times of longitudinal echo and reflected shear echo from the outer surface were measured accurately. The velocity ratio of the longitudinal wave to the shear wave was calculated and displayed using contour plot. Compared to the conventional flight time method of longitudinal wave, the velocity ratio method shows superior sensitivity to detect smaller blisters as well as better images for the blister shapes. Detectable limit of the outer shape of the hydride blisters was conservatively estimated as $500{\mu}m$, with the same specifications of ultrasonic transducer used in the actual PHWR pressure tube inspection.

• Journal of Aquaculture
• /
• v.19 no.4
• /
• pp.288-298
• /
• 2006

Larval distribution of bivalve from 29 stations in Deukryang Bay was examined from May to November in 1995. The abundance of total larvae increased from May ($3,736\;inds/m^3$) and reached maximum in August ($174,616\;inds/m^3$). But it decreased continuously until November ($2,171\;inds/m^3$). D-shape, early umbone and advanced umbone stage larvae composed of 76%, 18% and 6%, respectively, of total bivalve larvae. Nine larval species of bivalve were identified in this study. The mean abundance of Scapharca subcrenata larvae was $14,030\;inds/m^3$, which was 33.5% of total identified larvae. S. broughtonii (16.2%), Crassostrea gigas (12.5%), Mytilus edulis (10.2%) were also major species in order of their abundance. Considering the monthly larval occurrence in Deukryang Bay, main spawning month of bivalves except M. edulis and M. senhausia was estimated as July. Even though the spatial distribution of bivalve larvae in Deukryang Bay was different by the species, the larvae were generally abundant in the inner and west area of the bay, where was shallower and higher water temperature than the entrance and east area of the bay.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.5
• /
• pp.91-100
• /
• 2011

This study aimed at the identity of the landscape architectural award, which is the highest authority award system in landscape architecture; the establishment of cooperation between the landscape architecture and urban public sector, which deals with infrastructure is significantly requested nowadays. The identity characteristic of a detailed concept which configures the sameness in the shape of inner self-cognition and individuality as external and correlative cognition are utilized as the research methodology, and the findings are summarized as follows. The Korean Landscape Architectural Award holds an internal value as the only award in landscape architecture that is granted municipalities and public agencies. However, when it is compared with several correlated award systems, the vulnerable sides such as short origin and partly limping in terms of sustainability, the possibilities of losing the interest in the public sector due to management's reform program and insufficient participants and responses regarding social authority have been found. In addition, according to the today's paradigm tha taims for green cities, the aspect that shares the large portion with the values set by detailed categories of city planning that enforces metropolis awards is also in the spotlight. Hence, the landscape architectural award should construct specialization and development strategies by strengthening the superiority compared with the city award in the field of city planning. In other words, the Ministry of Land, not limited to the systematic cooperation with various administrative areas will be strengthened and it will communicate with the aspect that reinforces characters as an academic and practical area that covers various districts and disciplines. Thus, the identity is directly connected to the landscape architectural award's competitive reinforcement as a detailed characteristic variously combined, and it requires huge interest and discussions regarding internal and external landscape architecture areas and the democratic public discussion process.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.1-26
• /
• 1975

These studies were attempted to find out the optimum silk reeling system by use of automatic silk reeling machine to increase raw silk yield and reeling efficiency with various silk reelable cocoons. The obtained results are as follows; 1. The mean silk reelability ratio(X)of the Korean cocoons during the last ten years was 61 per cent, beside 64.7 per cent in autumn cocoon and 57.3 per cent in spring cocoon. However, the ratio variation of autumn cocoons was larger than that of spring cocoons. 2. A positive correlation between cocoon filament breaks during its process and silk reelability levels was shown to be significant. The cocoons of both poor and good reelability evidenced "J" shape distribution on the filament break graph by the order of reeling cocoon end. Many bave breaks were found at the inner shell of the cocoons, or in case of poor reelability cocoons. 3. The morphology of broken cocoon ends during the process was classified into A, B, C, D, E and F types, The occurrence of B type was majority, but that of F type was minority among them. 4. In case of the cocoon cooking, H-type ion-exchanged soft water was better for good reelability cocoons, Na and H-type ion exchanged neutral soft water for those of fair reelability, and alkaline (Na-type) soft water for those of poor reelability, respectively. 5. The modification of cooking water by mixing the above different types of water (50％ Na-type and 50％ H-type passed by standard natural water; 75％ Na-type and 25％ H-type passed by hard natural water; 25％ Na-type and 75％ H-type passed by soluble natural water) made higher yield of raw silk with tess breaks of thread. 6, In case cocoon ends groping water included sodium hexametaphosphate as much as 800 ppm. the groping efficiency and raw silk yield of cocoon was improved. The effect was pronounced in case of poor reelability cordons. 7. The most reasonable cocoon cooking and silk reeling condition for automatic silk reeling process were observed to be rather incomplete cook with good reelability cocoons and optimum cook with poor reelability cocoons succeeded by the reeling bath temperature of 45$^{\circ}C$, 8. The reasonable silk reeling velocities were observed to be about 150m per min. for good reelability cocoons, 120m per min. for fair reelability ones and 90 to 120m per min. for poor reelability ones. 9. In order to improve the raw silk yield of cocoons and reeling efficiency, the cocoon stand-by-ratio for reeling should be kept at the level of 40 per cent for good reelability cocoons or at 60 per cent for poor reelability ones beside necessary end found cocoon condition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.88-94
• /
• 2005

This paper is a study on the blade-type optical bench satisfying stiffness and thermal pointing error requirements for earth observation satellite. According to shape requirements, optical bench is designed. Because it does not satisfy the stiffness requirement, the stiffener is added on the outer/inner area of optical bench. But it does not meet the thermal pointing error requirement. So symmetrical structure is suggested with platform support structure attached on the upper/lower part of platform. Although it has better value than previous case, it still does not meet the thermal pointing error requirement. Based on the results of prior cases, optical bench finally designed, which satisfied both the stiffness and thermal pointing error requirements. Next conclusions follow from this design. It is efficient to increase thickness of platform facesheet, add stiffener and increase blade number to raise stiffness. It is effective to connect component consisting of same material and design optical bench having symmetrical structure to lower thermal pointing error.

• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.345-357
• /
• 2002

Ecological characteristics on habitats and morphological features of the seagrass Zostera caulescens Miki in Korea were examined. The biogeographical distribution of Z. caulescens was confirmed in the south coast of the Korea. Zostera caulescens usually inhabits at the inner bay, where is sheltered from wave action and 3.0 to 6.5 m deep. The sediment in habitats is composed of very fine muddy sand or sandy mud. In morphology, Z. caulescens is easily distinguished from other species of the genus by the formation of vegetative canopy on the top of reproductive stems. The number of longitudinal ribs in testa was 24 revealed by scanning electron microscope (SEM) while the number of ribs in Z. marina has been often reported to be 16-20. Purplish anthocyanin spots were displayed on the surface when the testa was removed. We found that the size and shape of leaf epidermal cells in Z. caulescens were very different from those of Z. marina when the leaf cuticles were removed by maceration which could be useful characters for identifying Zostera species. The leaf of Z. caulescens displays two different casts of color when the fresh plant is closely observed. The margins of leaves appear brighter than the center of leaves due to the thickening by the development of paralleled venation in the middle of leaves. The comparison of two populations of Z. caulescens in Korea showed that they were considerably different in their shoot density and biomass. The shoot density and biomass at Gabae population was $367.3 m^{-2}\;and\;725.7g$ dry wt $m^P{-2}$ respectively, while those at Jukrim population were $112.5m^{-2}\;and\;392.0g\;dry\;wt\;m^{-2}$, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.747-754
• /
• 2017

The Concrete-Filled Tube (CFT) system was developed for its excellent structural performance, such as its good stiffness, stress and ductility, which is derived from the mechanical advantages of its composite structure. However, it is known that the flat type of reinforcing plates need stiffeners placed at a certain distance from each other to avoid buckling failure, which increases the cost accordingly. This paper investigates the contribution of the rib elements placed inside the steel tube for the purpose of increasing the bond strength between the steel and concrete and fire performance with no additional protection. The test results also demonstrate the effectiveness of the corrugated rib's shape against fire. The results of this study showed that the buckling prevention and fire resistance performance criteria were satisfied by the application of the inner surface attachment rib, due to the resulting increase in the strength of the CFT column. Therefore, it is considered that the CFT method using the corrugated rib structure reinforcement developed through this study satisfies the structural and fire resistance performance criteria without the need for a refractory coating. Future studies will be needed to make the process efficient and economical for factory production.