• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.947-952
• /
• 2006

It has been confirmed that the inner defect of insulator and the perfect diagnosis for aging are closely related to safe electric power transmission system and that the detection of accident and diagnosis technique turn out to be very important issues. But perfect diagnosis is difficult because discharge pattern is irregular. Thus, we investigated discharge pattern using the new distribution statistical models with cross-inked polyethylene(XLPE) specimens. Voltage was applied to power frequency by step method, and calibration of discharge was set to 50 pC. After the voltage was applied, it measured the discharge occurring during 10s. We investigated discharge pattern using the K-means analysis and Weibull function. We also investigated variation of centroid and shape parameter due to variation of voltage. As a result of analyzing K-means, it was confirmed that cluster including many object numbers was formed by the presence of void. And result of Weibull distribution, it was confirmed that shape parameter of discharge varied from 1.28 to 1.62 in no void specimens, and that shape parameter of discharge number varied from 1.28 to 1.62. In the void, shape parameter of discharge varied from 5.66 to 6.43, and shape parameter of discharge number varied from 5.05 to 5.08.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.314-319
• /
• 2016

Flange bolt has a circular flange under the head that acts like a washer to distribute the clamping load over a large area. Flange bolt has usually been manufactured by cold forging. Flower shape defect occurs in the flange forging stage. This defect causes lack of dimensional accuracy and low quality. So it is needed to improve these forging defects. In this study, die design method for flower shape defect of flange bolt was suggested. In order to improve flower shape defect, inner diameter of the addition die in conventional forging process was modified. The forging process with applied modified die was simulated by commercial FEM code DEFORM-3D. The simulated results for modified die were confirmed by experimental trials with the same condition.

• Journal of Dairy Science and Biotechnology
• /
• v.35 no.4
• /
• pp.232-243
• /
• 2017

Although several supplementary foods are available for pregnant and lactating women, there is a need for foods able to maintain a woman's beauty without any changes in body shape. In this study, four questionnaires about nutrition management, skin care, body shape, and the intent of purchasing beauty supplementary foods, were prepared for an online survey (http://pms8011.wixsite.com/project). A total of 95 answers from 293 women were classified into four groups, based on age, income, occupation, and skin type. The data were statistically analyzed using SPSS/WIN Program 22.0. The significances of the F-value analyzed by one-way ANOVA and the differences within the groups were verified by Scheffe's method. All groups were shown to have very high requirements for nutrition management and beauty standards. In the skin patterns, the groups of middle-aged women, house wife and the lower income showed high interests, with a high significance (P<0.01) in ages. With respect to body shape, significant interest was found within the groups of skin type (P<0.05) and age (P<0.001). With regard to supplementary foods, all groups showed a strong intention to purchase, but no significant differences were found. This study indicates the necessity to categorize supplementary foods by the intended target group, such as women planning to conceive, pregnant women, and lactating women.

• Design & Manufacturing
• /
• v.14 no.4
• /
• pp.65-70
• /
• 2020

Partial reinforcement of sheet metal parts with CFRP patch is a technology that can realize ultra-lightweight body parts while overcoming the high material cost of carbon fiber. Performing these patchworks with highly productive press equipment solves another issue of CFRP: high process costs. The A-pillar is the main body part and has an undercut shape for fastening with other parts such as roof panels and doors. Therefore, it is difficult to bond CFRP patches to the A-pillar with a general press forming tool. In this paper, a flexible system that applies uniform pressure to complex shapes using ceramic particles and silicone rubber is proposed. By benchmarking various A-pillars, a reference model with an undercut shape was designed, and the system was configured to realize a uniform pressure distribution in the model. The ceramic spherical particles failed to realize the uniform distribution of high pressure due to their high hardness and point contact characteristics, which caused damage to the CFRP patch. Compression equipment made of silicone rubber was able to achieve the required pressure level for curing the epoxy. Non-adhesion defects between the metal and the CFRP patch were confirmed in the area where the bending deformation occurred. This defect could be eliminated by optimizing the process conditions suitable for the newly developed flexible system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.926-937
• /
• 2005

The analysis category of Art to Wear was text analyzed from the research material of 100 projects put together by fashion specialist. The conclusion of Art to Wear was comprehended the general features of it were compared and analyzed from a semiotics context. According to this analysis, the formative features of modern Art to Wear is categorized into three different dimensions from a semiotics light. The formative features of modem Art to Wear in the light of syntactic dimension was divided as an open constructed shape of Space Extension, non-typical Deformation, Geometrical Plasticity. The formative features of modem Art to Wear in the light of semantic dimension express symbolic meaning through metaphorical sign. These sign reflect the body image of the life and death and its objective of Abjection, Hybrid of discultural appearance and the image of Hyper-reality, which are features used to comprehend the inner meaning. The formative features of modem Art to Wear in the light of pragmatic dimension divided the artist emotion and meaning system delivered by Emotive Image, the Phatic Image that arouse inner signification and the Poetic Image which contain artistic and aesthetic meaning within it.

• Journal of Haehwa Medicine
• /
• v.21 no.2
• /
• pp.49-61
• /
• 2013

The humans has tried to investigate the fundamental relationship of all phenomena through the eyes. In oriental medicine, inspection is a one way of diagnosing by observing outer shape of patients. Physiognomy is the study which infers characteristics, constitutions, predestinations of one man from his appearance. In other words, the study is about how inner spirit is expressed in the appearance and how we could understand the inner side from appearance. According to it, shapes, proportions and balances of human appearance also reflect the unrecognized characteristics of human. Esthetical beauty is product of seeing, it is considered with judgment of human just like beauty or ugliness, right or wrong, good and bad. In the east, they consider that the beauty is balance of nature, and that balance and harmony is important at human's face. For such a reason, the highest beauty has ideal as agreement ethical and aesthetic level through the harmony of ethical and physical beauty. And Physiognomy and inspection are the same as it.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.383-387
• /
• 2004

The Fuel Test Loop (FTL) consists of In-Pile Test Section (IPS) and Out-of-Pile System (OPS). The test condition in IPS such as pressure, temperature and quality of the main cooling water, can be controlled by the OPS. The FTL has been developed to be able to irradiate three pins to the core irradiation hole (IR1 hole) by considering for its utility and user's irradiation requirement. The IPS vessel assembly (IVA) consists of IPS head, outer pressure vessel, inner pressure vessel, inner assembly and test fuel carrier. The IVA is approximately 5.6 m long and fits within a 74 mm in diameter envelope over the full height of the chimney. Above the top of the chimney, the head of the IPS is enlarged to allow the closure flanges and pipe work connections. IVA was designed to test the CANDU and PWR nuclear fuel pin together. Specially, wished to minimize interference by nuclear fuel change in design and synthesize these items and shape design for IVA.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.480-485
• /
• 2002

The purpose of this paper is the development of guidance algorithm for a mobile robot which is used to acquire the position and state information of the pipe defects such as crack, damage and through hole. The data used for the algorithm is the range data obtained by the range sensor which is based on an optical triangulation method. The sensor, which consists of a laser slit beam and a CCD camera, measures the 3D profile of the pipe's inner surface. After setting the range sensor on the robot, the robot is put into a pipe. While the camera and the LSB sensor part is rotated about the robot axis, a laser slit beam (LSB) is projected onto the inner surface of the pipe and a CCD camera captures the image. From the images the range data is obtained with respect to the sensor coordinate through a series of image processing and applying the sensor matrix. After the data is transformed into the robot coordinate, the position and orientation of the robot should be obtained in order to guide the robot. In addition, analyzing the data, 3D shape of the pipe is constructed and the numerical data for the defects of the pipe can be found. These data will be used for pipe maintenance and service.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1134-1139
• /
• 2011

When the aspect ratio of a magnet varies, the magnetic field in the magnet also varies. The critical current of a tape-shaped HTS wire varies with the direction and magnitude of applied magnetic field. Consequently when the aspect ration of a HTS magnet varies, the critical current of a HTS magnet varies. This paper shows the relation between the aspect ratio of a magnet and the energy and inductance of a HTS magnet. The critical current is also shown at various aspect ratio of the magnet. The length of the HTS wire, inner diameter of the magnet, and number of pancake are chosen to be variables which varies the shape of the magnet. For a HTS magnet consisting of pancake windings, calculation results show the number of pancake windings are the prime factor which varied the energy and inductance of the magnet. The inner diameter of the magnet varies the energy and inductance of the magnet a little.

• Korean Journal of Human Ecology
• /
• v.15 no.6
• /
• pp.1037-1047
• /
• 2006

In this paper, various structures of the healthcare smart clothing for real-time measurement of vital sign were suggested. The wearing efficiency was evaluated to find out the best ergonomic clothing in the suggested design. The supplementary effects of the clothing components (princess line, double fabric, cushion) on the stable and tight positioning of sensors to the body were evaluated with wear test. Five experimental clothing for male subject were made with closely-fitted shape and they included two representative structure: one was the integrated type of inner and outer garments and the other was the separated type with two garments. Eight subjects in their twenties were participated in the wear test to evaluate the wearing efficiency of experimental clothing. As results, the clothing structure of the separated garments with the inner and the outer shells were evaluated as more efficient and comfortable. However, the effects of clothing components on the light positioning of the sensors to the body surface were not differentiated each other in the subjective evaluation.