• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1858-1862
• /
• 2008

최근에 발생하는 이상홍수로 인하여 설계규모를 초과하는 홍수가 발생하여 월류에 의한 제방붕괴 피해가 증가하고 있다. 초과규모의 홍수가 유하하더라도 월류에 의해서 제방이 붕괴되는 것과 붕괴되지 않고 단순히 월류하는 경우의 피해 정도는 매우 다른 양상으로 나타난다. 제방이 붕괴되는 경우, 제내지 유입량 및 유입기간의 증가로 인명 및 재산피해가 가중된다. 따라서 인구가 집중되고 재산이 밀집되어 있는 지역에 대해서는 제방붕괴에 의한 피해를 감소시키기 위한 특별한 대책이 필요하다. 본 연구에서는 기존 제방의 식생이 제방 월류 붕괴에 미치는 영향을 추정하기 위하여 수리실험을 수행하였다. 실험수로에 제작된 제방 뒷비탈에 인조식생을 부착시켜 유량에 따른 수심과 유속을 측정하였으며, 측정결과를 이용하여 조도계수를 산정하였다. 산정된 조도계수를 CIRIA(1987)의 보고서에 조도계수 산정 방법과 비교하고 분석하였다. 분석 결과, CIRIA(1987)에서 제시하고 있는 1V:2H제방의 조도계수 0.02보다 큰 값이 산정되었음을 알 수 있었다. 향후, 실제 식생에 대한 실험을 수행하여 흐름특성별 조도계수에 대한 추가적인 검토가 필요할 것으로 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1290-1294
• /
• 2004

In this study, new stochastic point rainfall models which can consider the correlation structure between rainfall intensity and duration are developed. In order to consider the negative and positive correlation simultaneously, the Gumbels type-II bivariate distribution is applied, and for the cluster structure of rainfall events, the Neyman-Scott cluster point process is selected. In the theoretical point of view, it is shown that the models considering the dependent structure between rainfall intensity and duration have slightly heavier tail autocorrelation functions than the corresponding independent mode]s. Results from generating long time rainfall events show that the dependent models better reproduce historical rainfall time series than the corresponding independent models in the sense of autocorrelation structures, zero rainfall probabilities and extreme rainfall events.

• Korean Journal of Plant Resources
• /
• v.17 no.1
• /
• pp.20-23
• /
• 2004

These studies were carried out to develop native Calanthe in Korea. Calanthe native to southern islands in korea has beautiful flowers with various color and sweet fragrance, and it has been reported to have very good ornamental value. Concerning the classified 57 lines had surveyed their characteristics during the three years, and confirmed which that had manifestation stably. And then, a line was developed and given a name of horticultural cultivar to ‘Saegdong’. The major characteristics of the selected line, ‘Saegdong’, were as follows. In its color of flower, sepal was reddish orange, petal was yellow and lip was yellow. ‘Saegdong’ had a bended-inner blooming type.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1661-1665
• /
• 2006

In a natural river, cross sections of a channel vary according to inner or outer parts of meandering. Generally, depth of outer parts is deeper than that of inner parts. This kind of cross section change by meandering can be demonstrated by Beta distribution. The objects of this research is a 3D simulation of primary and secondary flow in the meandering natural channel. FLOW-3D program, a numerical model using CFD technique, and LES method was used for this research. 3D simulations were conducted in the channels having Beta distribution cross sections which have beds of mortar, gravel and vegetation. Two types of water stages and discharge were applied to each channel. In this research, primary flows are located in the outer parts of a top of bend and secondary flows rotate in the bottom on outer parts.

• Geomechanics and Engineering
• /
• v.22 no.6
• /
• pp.541-552
• /
• 2020

With the increasing tension of current coal resources and the increasing depth of coal mining, the gob-side entry retaining technology has become a preferred coal mining method in underground coal mines. Among them, the technology of the gob-side entry retaining with the high-water filling material can not only improve the recovery rate of coal resources, but also reduce the amount of roadway excavation. In this paper, based on the characteristics of the high-water filling material, the technological process of gob-side entry retaining with the high-water filling material is introduced. The early and late stress states of the filling body formed by the high-water filling materials are analyzed and studied. Taking the 8th floor No.3 working face of Xin'an coal mine as engineering background, the stress and displacement of surrounding rock of roadway with different filling body width are analyzed through the FLAC^3D numerical simulation software. As the filling body width increases, the supporting ability of the filling body increases and the deformation of the surrounding rock decreases. According to the theoretical calculation and numerical simulation of the filling body width, the filling body width is finally determined to be 3.5m. Through the field observation, the deformation of the surrounding rock of the roadway is within the reasonable range. It is concluded that the gob-side entry retaining with the high-water filling material can control the deformation of the surrounding rock, which provides a reference for gob-side entry retaining technology with similar geological conditions.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.458-465
• /
• 2017

The purpose of the present study was to examine the method of physically processing oyster shells for use as raw material(aggregate) through experimentation. The results of the experiment found that the adequate particle size of the pulverized oyster shells should be smaller than 10mm due to their shape. Also, after considering various particle size distributions and residual rates by particle size, the study found the cutter mill to be the most suitable tool for pulverizing oyster shells. The use of a cutter mill resulted in recovery rates of 97.3%, 98.2%, and 98.9% for inner screens of 8mm, 12mm, and 20mm respectively, revealing how the increase of screen size results in slightly higher recovery rates. The experiment involving the difference between the inner screen of the cutter mill and the speed of the inverter shows that a smaller screen size and a faster inverter speed result in a lower fineness modulus, while a rise in inverter speed for an identical screen made possible the material recovery of a much lower range of particle sizes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.2
• /
• pp.93-104
• /
• 1999

Existing composting system was improved to have a high performance for organic degradation, deodorization and energy reduction. Compared with conventional devices, this developed system uses the heat recovered from platinum catalytic tower by three times heat exchange in which 65% of exhaust gas was recirculated. Evaporation of water was made easy by maintaining negative pressure in entire system. It was possible for reaction to be maintained steadily by microorganism agent. The optimum mixing volume ratio of garbage to sawdust was 15:1 contrary to 20:1 in conventional one. Moreover, aerobic condition was maintained efficiently. Effects obtained by using a inner circulation system were as follows. It was possible to reduce the ammonia causing offensive odor and verified that consumption of electricity cut down to 1/3 with reduction of exhaust gas inflowing. According to this inner circulation, the optimum air flow was $0.44m^3$ to 100kg treatment capacity. The electricity consumption was changed in proportion to inflowing air volume.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.5
• /
• pp.15-20
• /
• 2011

This study carried out a series of experiments involving impact tests (Drop Weight type & Charpy type with a standard specimen and newly designed I-type specimen), hardness tests, and fracture surface observations of French-made roll shell steel (F), abnormal roll shell steel (M), reheated roll shell steel (R), and S25C steel under heat treatment conditiAn experimental study was carried out to study the solid-liquid mixture upward hydraulic transport of solid particles in vertical and inclined annuli with a rotating inner cylinder. The lift forces acting on a fluidized particle play a central role in many important applications such as the removal of drill cuttings in horizontal drill holes, sand transport in fractured reservoirs, sediment transport, the cleaning of particles from surfaces, etc. In this study a clear acrylic pipe was used to observe the movement of solid particles. Annular velocities varied from 0.4 to 1.2 m/s. The effect of the annulus inclination and drill pipe rotation on the carrying capacity of a drilling fluid, particle rising velocity, and pressure drop in a slim hole annulus were measured for fully-developed flows of water and aqueous solutions of CMC (sodium carboxymethyl cellulose) and bentonite. The rotation of the inner cylinder was efficient at carrying particles to some degree. For a higher particle volume concentration, the hydraulic pressure loss of the mixture flow increased because of the friction between the wall and solids or between solids.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.92-97
• /
• 2016

Spray dried $Cr_2O_3$ powder having an agglomerated structure of particles was twice treated into a plasma flame to increase its apparent density. The powder subjected to the first densification treatment did not show the entirely melted state keeping inner particle hollows, and it was fully melted after the second processing only. The powder size as a result of the second treatment decreased, and the apparent density as well as flowability were increased due to melting and surface smoothing effects. But a part of particles after the second densified treatment showed the hollow structure, especially those which were above $30{\mu}m$ in size. This densification behavior of the powder has been qualitatively discussed in terms of the thermal conductivity and inner gas pressure within aggregates exposed to the plasma flame.

• Food Science of Animal Resources
• /
• v.36 no.3
• /
• pp.397-404
• /
• 2016

The objective of this study was to determine the effect of dietary supplementation with whey powder (WP, 1g/kg feed) from weaning to slaughter (150 d) on dry-aged loin quality of pigs. Fifty-eight pigs were randomly divided into two dietary treatment groups (seven replications of four pigs per treatments). Basal diet with 0.1% whey powder was supplied to the WP group. Basal diet was used for the control group (CON). Diet whey protein did not appear to influence the moisture or protein contents. However, ash and fat contents were significantly (p<0.05) decreased in the WP group compared to the control group. Drip loss was significantly (p<0.05) lower in the WP group than that of the control group. Increasing redness with decreasing lightness was found in the inner loin of the WP group. Calcium and iron contents in the WP group were significantly higher than those in the control group. Protein degradation was higher in the WP group than that in the control group (p<0.05), whereas shear force was lower in the WP group than that in the control group (p<0.05). In conclusion, the basal diet supplemented with 0.1% whey powder influence negatively the lipid oxidation of meat whereas the texture property and mineral composition of meat from whey powder fed pigs are developed.