• Journal of Animal Science and Technology
• /
• v.46 no.2
• /
• pp.217-226
• /
• 2004

This study was canied out to evaluate the quality characteristics of the fermented pork with Korean traditional seasonings. The samples, outside muscle of pork ham were cut to cube(7 ${\times}$ 12 ${\times}$ 2cm) and five Korean traditional seasonings such as garlic paste(TI), pickled Kimchi(T2), pickled Kimchi juice(T3), soybean paste(T4), red pepper paste(T5) were seasoned by the proportions of meat to seasonings(1 : 1). The seasoned samples were fennented at - 1 ${\pm}$ 1$^{\circ}C$ for 20 days. According to proximate composition analysis, all pork samples contained protein 20 ${\sim}$ 22%, fat 3 ${\sim}$ 5%, moisture 64 ${\sim}$ 70% and ash 1.8 ${\sim}$ 2.0%. However, T5 had high crude fat level and relatively low moisture content. The highest pH among treatments was shown in TI whereas T3 showed the lowest. Water holding capacity(WHC) of T4 and T5 were higher, while those values were lower in T3 compared with other treatment. Shear force value was the highest in T5, while it was the lowest in T4. TBARS value of T3 was the highest, while that was the lowest in T4. Moreover the highest VBN value was observed in T4 due to fermentation of soy protein. However, the lowest VBN value shown in Tl indicated the inhibition of protein degradation by the garlic. The highest saccarinity was shown in T5 but it was the lowest of in T3. Salinity was shown to be high in T2 and low in T5. $L^*$ values of T4 was higher both at the surface and inner side of samples than the others but T5 showed the lowest value. T2 showed the highest $a^*$ value but T4 and T5 showed the lowest. In the result of sensory evaluation for cooked meat, T5 had the highest score in all item including overall acceptability, while T4 had the lowest score. Unsaturated fatty acid(UFA) ratio of T5 and n were 72.16 and 69.93 respectively, and the ratio of UFA/Saturated fatty acid(SFA) were higher in the order of T5 >T4> T3 >Tl >T2. Overall quality characteristics were higher in the order of T5 >T2 >Tl >T4 >T3.

• Ocean and Polar Research
• /
• v.25 no.2
• /
• pp.183-200
• /
• 2003

In order to assess the ecological changes induced by organic pollutants of the Shihwa Lake, BPI (Benthic Pollution Index) based on the benthic faunal community was employed. It was modified from Infaunal Trophic Index (ITI), and recommended as a pollution detecting method for the environmental assessment. The BPI values were calculated from the benthos data, which were collected for three terms: in 1980, before the Shihwa Lake was built up; in 1994-1997, which the Shihwa Lake was completely isolated from the outer seawater; in 1997-1999, after inflow of the outer seawater. Since the Shihwa Dike was constructed in February 1994, the pollution intensity of the lake had been increased from the narrow and inner part of the former Gyeonggi Bay and spread fast along the coast line of the Shihwa Lake. Then, in 1996 it showed the very high BPI levels all around the Lake. This serious polluted condition had been lasted till 1997, when the inflow of the seawater was begun. In 1998, from the nearest part of the Shihwa Gate, the BPI levels gradually became low in most area of the Lake, except its inner and narrow part. These greatly lowered BPI levels mean that the seawater inflow could be assumed to affect positively in the lake. Furthermore, BPI gave the same results from the other environmental assessment based on the abundance and the species richness of macrobenthic community. It shows that BPI could be useful as an effective method to assess the marine environment and evaluate the status of environmental conditions.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1295-1306
• /
• 2012

A microorganism producing carboxymethylcellulase (CMCase) was isolated from seawater and identified as Bacillus atrophaeus. This species was designated as B. atrophaeus LBH-18 based on its evolutionary distance and the phylogenetic tree resulting from 16S rDNA sequencing and the neighbor-joining method. The optimal conditions for rice bran (68.1 g/l), peptone (9.1 g/l), and initial pH (7.0) of the medium for cell growth was determined by Design Expert Software based on the response surface method; conditions for production of CMCase were 55.2 g/l, 6.6 g/l, and 7.1, respectively. The optimal temperature for cell growth and the production of CMCase by B. atrophaeus LBH-18 was $30^{\circ}C$. The optimal conditions of agitation speed and aeration rate for cell growth in a 7-l bioreactor were 324 rpm and 0.9 vvm, respectively, whereas those for production of CMCase were 343 rpm and 0.6 vvm, respectively. The optimal inner pressure for cell growth and production of CMCase in a 100-l bioreactor was 0.06 MPa. Maximal production of CMCase under optimal conditions in a 100-l bioreactor was 127.5 U/ml, which was 1.32 times higher than that without an inner pressure. In this study, rice bran was developed as a carbon source for industrial scale production of CMCase by B. atrophaeus LBH-18. Reduced time for the production of CMCase from 7 to 10 days to 3 days by using a bacterial strain with submerged fermentation also resulted in increased productivity of CMCase and a decrease in its production cost.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.453-462
• /
• 1998

Macrobenthic community structure was studied at thirteen stations in Taebudo subtidal area, Korea, from July to October 1996. Triple macrobenthos samples were collected using a van Veen grab (0.1 $m^2$) at each station during the study period. A total of 209 species of macrobenthos was sampled with a mean density of 1,093 ind./$m^2$ and biomass of 134,86 g/$m^2$. Of these, there were 72 species of polychaetes ($34.5\%$), 69 crustaceans ($33.0\%$) and 49 molluscs ($23.4\%$). Polyalaetes were represented as a density-dominant faunal group with a mean density of 608 ind./$m^2$, comprising $55.6\%$ of the total benthic animals. It was followed by crustaceans with 307 ind./$m^2$($28.1\%$ of the total density), Echinoderms were represented as a biomass-dominant faunal group with a mean biomass of 54.21 g/$m^2$($40.2\%$ of total biomass). Total number of species and diversity were low in the inner part of the study area with high mud content and high in the offshore stations of mixed sediments. Major dominant species were three polychaetes, Heteromastus filifomis, Scoloplos armiger and Tharyx sp. whose mean densities were 70 ind./$m^2$, 67 ind./$m^2$, and 66 ind./$m^2$, respectively. Cluster analysis showed that the study area could be divided into five stational groups based on the faunal composition, that is, the innermost stations, coastal stations, transitional stations and two offshore station groups. The species diversity of these groups increased from the inner stational group toward the outer groups.

• Journal of fish pathology
• /
• v.36 no.2
• /
• pp.263-275
• /
• 2023

Chum salmon (Oncorhynchus keta) is a species which returns to Korea for spawning and was produced as seed production at the Fisheries Resources Agency located in Uljin-gun, Gyeongsangbuk-do to preserve the species. However, farmed chum salmon showed symptoms of bacterial infection. Therefore, in this study, bacteria were isolated to identify the causative agent from chum salmon in October 2021. The isolated bacteria were identified based on the sequences of 16S rDNA, rpoD (RNA polymerase sigma factor σ⁷⁰), and vapA (A-layer) genes. Also, salinity-growth curve, biochemical characterization, antibiotic susceptibility test, and pathogenicity analysis were performed in four strains. As a result, four isolated strains were identified as Aeromonas salmonicida subsp. salmonicida. Additionally, the bacterial strains showed a decrease in growth as the salt concentration increased in the medium. All of the isolated strains exhibited γ-hemolysis, and the same biochemical properties. In the antimicrobial susceptibility test, all strains showed an inhibition zone of 40 to 44 mm for oxolinic acid, flumequine, and florfenicol. Pathogenic factors were assessed by RT-PCR at the mRNA level, and found that the four strains expresses the outer membrane ring of T3SS (ascV), inner membrane ring of T3SS (ascC), vapA, enterotoxin (act), and lipase (lip) genes which are well known to significantly contribute to the pathogenicity of A. salmonicida. The results of this study can be used as basic data to prevent A. salmonicida subsp. salmonicida occurring in sea-chum salmon in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.5
• /
• pp.650-657
• /
• 2018

Objective: The study investigated the biological functions and mechanisms for controlling cashmere growth of Liaoning cashmere goat by ovarian carcinoma immunoreactive antigen-like protein 2 (OCIAD2) and decorin (DCN) genes. Methods: cDNA library of Liaoning cashmere goat was constructed in early stages. OCIAD2 and DCN genes related to cashmere growth were identified by homology analysis comparison. The expression location of OCIAD2 and DCN genes in primary and secondary hair follicles (SF) was performed using in situ hybridization. The expression of OCIAD2 and DCN genes in primary and SF was performed using real-time polymerase chain reaction (PCR). Results: In situ hybridization revealed that OCIAD2 and DCN were expressed in the inner root sheath of Liaoning cashmere goat hair follicles. Real-time quantitative PCR showed that these genes were highly expressed in SF during anagen, while these genes were highly expressed in primary hair follicle in catagen phase. Melatonin (MT) inhibited the expression of OCIAD2 and promoted the expression of DCN. Insulin-like growth factors-1 (IGF-1) inhibited the expression of OCIAD2 and DCN, while fibroblast growth factors 5 (FGF5) promoted the expression of these genes. MT and IGF-1 promoted OCIAD2 synergistically, while MT and FGF5 inhibited the genes simultaneously. MT+IGF-1/MT+FGF5 inhibited DCN gene. RNAi technology showed that OCIAD2 expression was promoted, while that of DCN was inhibited. Conclusion: Activation of bone morphogenetic protein (BMP) signaling pathway up-regulated OCIAD2 expression and stimulated SF to control cell proliferation. DCN gene affected hair follicle morphogenesis and periodic changes by promoting transforming growth $factor-{\beta}$ ($TGF-{\beta}$) and BMP signaling pathways. OCIAD2 and DCN genes have opposite effects on $TGF-{\beta}$ signaling pathway and inhibit each other to affect the hair growth.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.1
• /
• pp.47-57
• /
• 2017

Solar energy is one of the important renewable energy resources. It can be used for air heating, hot water supply, heat source of desiccant cooling system and so on. And many researches for enhancing efficiency have been conducted because of these various uses of solar thermal energy. This study was performed to investigate the air heating performance of hybrid solar air-water heater that can heat air and liquid respectively or simultaneously and finding method for improving thermal performance of this collector. This collector has both liquid pipe and air channel different with the traditional solar water and air heater. Fins were installed in the air channel for enhancing the air heating performance of collector. Also air inlet & outlet temperature, ambient temperature and solar collector's inner part temperature were confirmed with different air velocity on similar solar irradiance. As a result, temperature of heated air was shown about $43^{\circ}C$ to $60^{\circ}C$ on the $30^{\circ}C$ of ambient temperature and thermal efficiency of solar collector was shown 28% to 73% with respect to air velocity. Also, possibility of improvement of thermal performance of this collector could be ascertained from the heat transfer coefficient calculated from this experiment. Thus, it is considered that the research for finding optimal structure of hybrid solar air-water heater for enhancing thermal performance might be needed to conduct as further study based on the method for improving air heating performance confirmed in this study.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2001.10a
• /
• pp.37-43
• /
• 2001

1. About fifty thousand of cattle embryos were transferred and 16000 ET-calves were born in 1999. Eighty percents of embryos were collected from Japanese Black beef donors and transferred to dairy Holstein heifers and cows. Since 1985, we have achieved in bovine in vitro fertilization using immature oocytes collected from ovaries of slaughterhouse. Now over 8000 embryos fertilized by Japanese Black bull, as Kitaguni 7~8 or Mitsufuku, famousbulls as high marbling score of progeny tests were sold to dairy farmers and transferred to their dairy cattle every year. 2. Embryo splitting for identical twins is demonstrated an useful tool to supply a bull for semen collection and a steer for beef performance test. According to the data of Dr. Hashiyada(2001), 296 pairs of split-half embryos were transferred to recipients and 98 gave births of 112 calves (23 pairs of identical twins and 66 singletons). 3. A blastomere-nuclear-transferred cloned calf was born in 1990 by a joint research with Drs. Tsunoda, National Institute of Animal Industry (NIAI) and Ushijima, Chiba Prefectural Farm Animal Center. The fruits of this technology were applied to the production of a calf from a cell of long-term-cultured inner cell mass (1988, Itoh et al, ZEN-NOH Central Research Institute for Feed and Livestock) and a cloned calf from three-successive-cloning (1997, Tsunoda et al.). According to the survey of MAFF of Japan, over 500 calves were born until this year and a glaf of them were already brought to the market for beef. 4. After the report of "Dolly", in February 1997, the first somatic cell clone female calves were born in July 1998 as the fruits of the joint research organized by Dr. Tsunoda in Kinki University (Kato et al, 2000). The male calves were born in August and September 1998 by the collaboration with NIAI and Kagoshima Prefecture. Then 244 calves, four pigs and a kid of goat were now born in 36 institutes of Japan. 5. Somatic cell cloning in farm animal production will bring us as effective reproductive method of elite-dairy- cows, super-cows and excellent bulls. The effect of making copy farm animal is also related to the reservation of genetic resources and re-creation of a male bull from a castrated steer of excellent marbling beef. Cloning of genetically modified animals is most promising to making pig organs transplant to people and providing protein drugs in milk of pig, goat and cattle. 6. Farm animal cloning is one of the most dreamful technologies of 21th century. It is necessary to develop this technology more efficient and stable as realistic technology of the farm animal production. We are making researches related to the best condition of donor cells for high productivity of cloning, genetic analysis of cloned animals, growth and performance abilities of clone cattle and pathological and genetical analysis of high rates of abortion and stillbirth of clone calves (about 30% of periparutum mortality). 7. It is requested in the report of Ministry of Health, labor and Welfare to make clear that carbon-copy cattle(somatic cell clone cattle) are safe and heathy for a commercial market since the somatic cell cloning is a completely new technology. Fattened beef steers (well-proved normal growth) and milking cows(shown a good fertility) are now provided for the assessment of food safety.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.79-92
• /
• 2011

In this study, wave pressure of short-period gravity waves and tsunami acting on the upright section of the horizontal-slit type caisson placed on the impermeable or permeable seabed, which is a well-known permeable breakwater with a good wave controlling ability, are investigated via numerical simulations. Further, the permeable seabed was modeled as the porous media with porosity of 0.4. Using the numerical results, the effects of the seabed conditions on the wave pressure on the front wall and inside wall of the chamber have been studied. In the numerical simulations, short-period gravity waves and tsunami(solitary wave or bore) with the same amplitude to the gravity wave are considered. A numerical wave tank is used, which is able to consider a gas-liquid two-phase flow in the same calculation zone. Numerical results show that the wave pressure of the tsunami was 3~5 times higher than the short-period gravity waves acting on the front wall and it was 2~4 times higher than the short-period gravity waves acting on the inner wall.

• Journal of Sericultural and Entomological Science
• /
• v.53 no.1
• /
• pp.6-11
• /
• 2015

Antheraea yamamai silkworm cocoon is considered as a natural biocompatible materials, but can not be used as medical resources due to its difficult processability. In this study, we examined the general characteristics including cocoon shell weight and structural and thermal properties of Antheraea yamamai silkworm cocoon. The cocoon shell weight and thickness of wild silkworm cocoon was 0.528 g and 0.424 mm, respectively. The cocoon has yellow-green color in outside cocoon but white in inner layer cocoon. Amino acid analysis showed that the main amino acid of Antheraea yamamai cocoon is alanine, glycine, serine, aspartic acid, tyrosine and arginine. X-ray diffractometry showed that strong diffraction peaks at $2{\theta}=16.8^{\circ}$, $20.4^{\circ}$, corresponded to ${\beta}$-sheet structure and sharp diffraction peaks at $2{\theta}=15.0^{\circ}$, $24.3^{\circ}$, $30.0^{\circ}$ due to the presence of calcium oxalate on cocoon surface. Antheraea yamamai cocoon was degraded at $370^{\circ}C$. These results might be used as basic information for development of non-textile materials using Anthereae yamamai silkworm cocoon.