• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.452-455
• /
• 2000

Superconducting power cable is one of the most promising energy application of high-T$_{c}$ superconductors (HTS). A prototype HTS cable have been constructed multi-layer cable using Bi-2223 tape and tested. The AC transport losses under self field were investigated at 77K on the 19 filamentary tape and multi-layer HTS cables. And we carried out numerical analysis using bean model. The result shows that the total transport current of HTS cable in L$N_2$ was 475[A], and transport current passed through almost the outer layer (2-layer). Also, AC transport losses in outer layer of HTS cable was proportion to I$^2$ and higher than losses of inner layer. In case of Ip=Ic, calculated numerical loss density was concentrated on the edge of tape and most of loss density in cable was distributed outer layer more than inner layer. As magnetic distribution was concentrated on outer layer.r.

• Membrane and Water Treatment
• /
• v.5 no.2
• /
• pp.109-122
• /
• 2014

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.169-171
• /
• 1989

The curved active layer inner stripe(CALIS) laser diode has been developed. The tight confinements of current and carrier result in low thershold current(20-30mA) with stable fundamental transverse mode operation up to the output power of 30mW CW.

• The Korean Journal of Community Living Science
• /
• v.14 no.1
• /
• pp.87-96
• /
• 2003

This study was to examine the possibility of making use of the edible portion on the inner layer of chestnut, which is produced as wastes in the chestnut processing, into chestnut-noodle. To conduct this study, the chestnut powder, which is separated and collected from the inner layer, was used to examine the possibility of making chestnut-noodle. The structure of chestnut-noodle was observed by Scanning Electron Microscope (SEM) and the sensory quality was conducted to examine usability of the chestnut-noodle as compared to wheat flour noodle by Quantitative Descriptive Analysis (QDA). The ten sensory qualities : appearance, color, flavor, hardness, elasticity, cohesiveness, adhesiveness, chewiness, gumminess, and acceptability, were evaluated by 10 point Likert type scale with 10-50% of different ratio of chestnut powder. The chestnut-noodle made by 50% of the chestnut powder got higher points than 10 % of chestnut powder mix in color. However, the chestnut-noodle made by 50% of the chestnut powder got lower points than wheat flour noodle in flavor. Finally, there was no significant difference in hardness, elasticity, cohesiveness, adhesiveness, chewiness and gumminess between the chestnut-noodle made by 30% of the chestnut powder and wheat flour noodle.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.15-16
• /
• 2008

In case manufacturing COF, through hole should be made to be used for a pathway connecting the conductive layers of its both faces. In case Cu-plating inside of through hole with electroless plating way, contact between Cu and PI film gets bad to be fell apart from PI by the impact of applying to the electric devices. Therefore, after sputtering is applying on inner through hole, then a method to perform electroplating process. In this study, after changing sputtering condition to manufacture FCCL, we looked the changeability of the upper PI and inner hole Cu layers. Making use of RF Magnetron sputtering equipment, we coated Cu thin film and Cu-plated on it through electroplating. After cold-mounting the completed FCCL, we examined hole section through an optical microscope. From the result of test, with parameters deposition pressure and deposition time, both the thickness of the hole plated layer and PI plated upper layer increased at regular rate, increasing the thickness of Cu sputter layer. However, from the result of test in increasing RF-power, we could know the increment rate of hole plated layer is considerably greater than that of PI plated upper layer. Therefore, we finally acquired good result; if you want only to increase the plated layer of inner hole, it's much better to increase RF-power.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.40-44
• /
• 2019

Experimental studies have been carried out to investigate characteristics of gas explosion using a multi layered water gel barrier in a vented explosion chamber. The chamber is consisted of 1600 mm in length, with a square cross-section of $100{\times}100mm^2$. The gel concentration of inner layer of MLWGB ranged from 10% to 90% with intervals of 10% by weight of gel. Displacement of the MLWGB was photographed with a measured using a high-speed video camera, and pressure development was measured using a data acquisition system. It was found that MLWGBs with 10 ~ 20% inner layer concentrations were ruptured during the explosions. As the concentrations of inner layer increased from 30% to 90%, the barriers were not ruptured. As the gel concentrations of the inner layer increased, the displacement increased toward the chamber exit and the pressure decreased for the ruptured barriers. It was found that the pressure attenuation obtained from the MLWGB was higher than that of the single water gel barrier. For the cases of non-ruptured barriers, the pressure inside the chamber less increased with increasing gel concentrations of the inner layer. It was also found that the displacement moved back into the chamber for non-ruptured MLWGBs, and it was sensitive to the gel concentrations.

• Applied Microscopy
• /
• v.26 no.3
• /
• pp.277-291
• /
• 1996

The structures of the egg envelope in fertilized eggs of three species of characidae, head and tail light fish (Hemigrammus ocellifer), black tetra (Gymnocorymbus ternetzi), and buenos aires tetra (Hemigrammus caudovittatus) were studied using light and electron microscopes. The fertilized eggs in all species were colorless, transparent, spherical and non-floted type. The egg envelopes have a single micropyle resembling the pathway of sperm in the area of the animal pole. The micropyle was surrounded by protruded lines of the egg envelope in a radiated form. Egg envelopes of fertilized eggs in both head and tail light fish and buenos aires tetra consisted of three distinct layers; an outer layer, a middle layer and an inner layer. And that of blacktetra consisted of two layers; an outer layer and an inner layer. Also, an outer layers of both head and tail light fish and black tetra were adhesive types but, in that of buenous aires tetra was non-adhesive type. An outer surface of egg envelope in black tetra was arranged by pores regularly. In that of head and tail light fish and buenos aires tetra have a rough side. An inner layer of egg envelope in fertilized eggs consisted of lamellae alternating with interlamellae of lower electron density; an inner layer of fertilized eggs in head and tail light fish consisted of three layers, that of black tetra was four layers, and that of buenos aires tetra was five layers.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.15-20
• /
• 2000

The morphology of dopaminergic neurons in the adult ox retina was studied. The dopaminergic neurons were identified using antibody immunocytochemistry. The great majority of tyrosine hydroxylase - immunoreactive neurons were located at the innermost border of the inner nuclear layer. The processes were monostratified and ran laterally within layer 1 of the inner plexiform layer. The second major population of tyrosine hydroxylase - immunoreactive neurons was displaced amacrine cells. The processes of displaced tyrosine hydroxylase - immunoreactive amacrine cells were also located within layer 1 of the inner plexiform layer. Some processes of a few neurons were located in the outer plexiform layer. A very low density of neurons had additional bands of tyrosine hydroxylase - immunoreactive processes in the middle and deep layers of the inner plexiform layer. The processes of dopaminergic neurons widely extended radially and formed large, moderately branched dendritic fields. These processes occasionally had varicosities but did not have "dendritic rings". These results indicate that dopaminergic cells make up specific neuronal cell types in the ox retina.

• Journal of Sericultural and Entomological Science
• /
• v.18 no.1
• /
• pp.21-26
• /
• 1976

The study was carried out to investigate the variations in the fibroin hydrolysis of different cocoon shell layers, and the relationship between the hydrolysis and silk physical property. The obtained results are as follows: 1. The fibroin hydrolyzing ratio was highest at the inner layer of cocoon shell and. next in order. at the middle layer and at the outer layer. 2. The fibroin hydrolyzing ratio of abnormal cocoons was higher than normal cocoon and it was different among them, tile highest was double coroon, thin shell cocoon and perforated cocoon in order. 3. The sericin content and fibroin hydrolyzing ratio of Jam 111 and Jam 112 was higher than that of Jam 111 $\times$ Jam 112. 4. The fibroin hydroiyzing ratio of the cocoons fed with the artificial diets was increased at the inner layer. The sericin content of those lessened at the inner layer, however, it slightly increased at the most inner layer more than at the inner layer. 5. The breaking strength of the degummed silk fiber of different cocoon layers was reduced at the inner layer. The breaking Strength of abnormal silk fiber was less than that of normal silk fiber. 6. A negative correlation (r= －0.8) )was approved between fibroin hydrolyzing ratio and breaking strength of silk fiber, and the regression line was Y=－0.29x＋5.07.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.315-322
• /
• 2018

Bamboo culm comprises internodes and nodes and is tapered from the bottom to the top. Anatomically, bamboo culm comprises vascular bundles and parenchymal base tissue. The gross anatomical structure of a transverse section of any culm internode is determined by the shape, size, arrangement, and number of vascular bundles. The purpose of this research was to examine the morphology of culm and the distribution and shape of vascular bundles in Ampel bamboo (Bambusa vulgaris). Bamboo culms were harvested from the base. Test samples were obtained from a central 2-cm long segment of each internode across the entire length of the culm. Results showed an uneven spread of vascular bundles in the internode cross-section. Transitioning from the outer to the inner layer of the internode, the number of vascular bundles per unit area decreased and their shape was variable. The size of vascular bundles in the middle layer of the internode was greater than that of those in the outer and inner layers. The shape of vascular bundles was circular in the outer layer, which gradually transformed into vertical oval toward the middle layer and horizontal oval toward the inner layer. Vascular bundles were of type III and IV in the bottom of the culm and type III in the middle to the top of the culm.