• 한국표면공학회지
• /
• 제30권4호
• /
• pp.248-254
• /
• 1997

The sulfidation behavior of a sputter-deposited amorphous coating of 69.0%Nb-16.9Ni-11.9%Al-2.2%Si (at.%) has been investigated as a funtion of temperature.(973-1173K) in pure sulfur pressure of 0.01atm. The sulfidation kinetics of the casting obyed the parabolic rate low over the whole temperature ranges studied. The stlfidation rate increased with the temperature, as expected. The sulfide scale, the composition of which was $Al_2S_3,\;NbS_2,\;Ni_{3-x}S_2\;and\;FeCrS_4$, formed on the amorphous coating was primarily bilayered. Both the outer fastgrowing non-protective 4Al_2S_3$scale and the inner slowly-growing protective $NbS_2$,/TEX> scale and the inner slowly-growing protective $NbS_2$ scale had some Fe and Cr dissolution, which evidently came from the base substrate alloy of stainless steel type 304. Belows the coating, Kirkendall void formation was noticed. Nevertheless, a dramatic improvement of sulfidation resistance was achieved by sputter-depositing Nb-2 Ni-Al-Si layer on the stainless steel 304.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.105-109
• /
• 1987

A solution which combines ray and aperture integration(AI) techniques is presented for the problem of electromagnetic plane wave scattering by an open-ended, perfectly-conducting, semi-infinite parallel plate waveguide with a thin, uniform layer of lossy or absorbing material on its inner walls, and with a simple planar termination inside. Numerical results are given for the fields outside the waveguide.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.190-196
• /
• 1999

Hot forgeability of STD 61 steel was boronzed in boronizing paste mainly consisted of B4C and Na2B4O7 at various temperatures and times. Microhardness and thickness of boride layers were measured and distributions of B, Si, Cr and V on the cross section of specimen were observed by EPMA line analysis. Microscopic examination and results of EPMA showed that the boride layer consisted of two layers outer layer of FeB and inner layer of Fe2B. Microhardness of these boride layers was in the range of Hv 1800~2300. Thickness of boride layer increased with times and temperatures. Si-rich $\alpha$ layer was formed between boride layer and matrix. Element such as Cr concentration as Cr23(B, C)6 beneath the boride layer.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권1호
• /
• pp.10-14
• /
• 2001

The superconducting transmission cable is one of interesting part in power application using high temperature superconducting wire. One important parameter in HTS cable design is transport current sharing because it is related with current transmission capacity and loss. In this paper, we calculate self inductances of each layer and mutual inductances between two layers from magnetic field energy, and current sharing of each layer for 4-layer cable using the electric circuit model which contain inductance and resistance (by joint and AC loss). Also, transport current losses which are calculated by monoblock model and Norris equation are compared. As a results, outer layer has always larger transport current than inner layer, and current capacity of each layer is largely influenced by resistance per unit cable length. As a conclusion, for high current uniformity and low AC loss, we have to decrease inductances themselves or those differences.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1551-1553
• /
• 2000

Superconducting power cable is one of the most promising energy application of high-$T_c$ superconductors (HTS). A prototype HTS cable have been constructed multi-layer cable using Bi-2223 tape and tested. The result shows that the total transport current of HTS cable in $LN_2$ was 475[A], and transport current passed through almost the outer layer (2-layer). Also, AC transport losses in outer layer of HTS cable was proportion to $I^2$ and higher than losses of inner layer. As magnetic distribution were concentrated on outer layer.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.484-489
• /
• 2002

테이프 캐스팅된 알루미나/지르코니아 또는 뮬라이트/지르코니아를 표면층으로 알루미나/지르콘(소결시 반응결합 뮬라이트/지르코니아 유도)을 내부층으로 적층하고 고온가압소결함으로써 층상 복합체를 제조하였다. 소결체에서 다양한 형태의 균열을 관찰 할 수 있었으며, 이는 주로 표면층으로의 횡단균열(channel crack, 계면에 수직방향으로 전파되는 균열), 중간층 내에서의 종단균열(transverse crack, 계면에 거의 평행한 방향으로 전파되는 균열)과 증간사이를 분리시키는 계면균열(interface crack, 계면을 따라 전파되는 균열)들로 구성되어 있었다. 이러한 균열들은 층을 이루는 복합산화물간의 열팽창계수의 차이에 의해 형성된 것으로 여겨졌다. 특히, 표면층을 뮬라이트/지르코니아로 적층하였을 경우 층간 계면에 평행한 균열과 중간층 내로의 종단균열이 생성되었으나, 알루미나/지르코니아로 하였을 경우는 이러한 균열이 확인되지 않았다. 한편, 압흔하중에 의한 적층체의 잔류응력 역시 표면층의 종류에 따라서 상이한 양상을 나타내었다.

• 한국작물학회지
• /
• 제50권6호
• /
• pp.442-446
• /
• 2005

관능특성이 우수한 밀가루의 제품생산 및 밀 품종 개량을 위한 기초자료를 얻고자 국산 그루밀 원맥을 Buhler test mill로 제분하고, 각 제분부위별로 휘발성 향기성분을 검토하였다. 1. 제분부위에 따른 밀의 휘발성 향기성분은 배유층인 $B_1,\;B_2,\;R_1$ 및 $R_2$층과 바깥층인 겨층과 배아간에 정성적인 차이는 없었으나 정량적인 차이는 있었다. 2. 겨층 및 배아층은 배유층에 비하여 m-xylene, n-butanol의 조성이 매우 높았다. 3. 밀에서 냄새의 지표화합물인 $C_6-aldehyde$류와 $C_{6-8}-alcohol$류의 조성은 제분부위에 따라 차이가 있었으며, 배유층 내부인 $B_1,\;B_2,\;R_1$층보다 바깥층인 $R_2$층에서 조성이 높았다. 따라서 $R_2$층이 $B_1,\;B_2,\;R_1$층에 비하여 관능적으로 보다 우수할 것으로 추정되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.167-176
• /
• 2006

In this paper we show that solutions of the nonlinear Nernst-Planck equation possesses the quadruple-layer structure near the interface when the electrolyte receives a high frequency forcing such as a high-frequency alternating current. Very near to the interface wall, the well-known, classical Stern layer exists. Near to the Stern layer we have the secondly thin layer (to be called inner layer in this paper) where the ion concentrations behave under the same frequency as the external forcing. However, in this layer, the positive and negative ion concentrations develop with the time phase 180-degree different from each other. Next to this second layer, we have the third layer (called middle layer) in which two ion concentrations change with the time period double the forcing, and both concentrations behave in the same time phase. In the outermost layer, i.e. the forth layer, (called outer layer) the ion concentrations show the same-phase development as the third one but decaying very slowly in time. Our assertion is mostly based on the 1-D numerical simulation for the Nernst-Planck equation under a high frequency AC field assuming that the quadruple layer is very thin compared with the length scale representative of the bulk region.

• Corrosion Science and Technology
• /
• 제14권3호
• /
• pp.113-119
• /
• 2015

Alloy 82/182 weld metals had been extensively used in joining the components of the PWR primary system. Unfortunately, there have been a number of incidents of cracking caused by PWSCC in Alloy 82/182 welds during the operation of PWR worldwide. To mitigate PWSCC, optimization of water-chemistry conditions, especially dissolved hydrogen (DH) and Zn contents, is considered as the most promising and effective remedial method. In this study, the PWSCC behaviours of Alloy 182 weld were investigated in simulated PWR environments with various DH content. Both in-situ and ex-situ oxide characterizations as well as PWSCC initiation tests were performed. The results showed that PWSCC crack initiation time was shortest in PWR water (DH: 30cc/kg). Also, high stress reduced crack initiation time. Oxide layer showed multi-layered structures consisted of the outer needle-like Ni-rich oxide layer, Fe-rich crystalline oxide, and inner Cr-rich inner oxide layers, which was not altered by the level of applied stress. To analyse the multi-layer structure of oxides, EIS measurement were fitted into an equivalent circuit model. Further analyses including TEM and EDS are underway to verify appropriateness of the equivalent circuit model.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제40권1호
• /
• pp.6-15
• /
• 2020

Silk has attracted the attention of numerous research groups because of its unique properties as a biomedical material. Recently, studies on the biomedical application of silk cocoon, such as membranes for guided bone regeneration, have been conducted. As a preliminary study on silkworm cocoons, the morphological structure and crystallinity of cocoon of nine silkworm varieties with different sides are examined in this study. The morphological structure of the silkworm cocoon is shown to be dependent on silkworm variety and the cocoon layer (i.e. outside or inside). It is also shown that the silk filaments of the out layer are more bent and twisted compared to those of the inner layer. Furthermore, the crystallinity of the outer surface of all silkworm cocoons is found to be higher than that of the inner surface, regardless of the silkworm variety. Lastly, it is shown that the crystallinity index of the cocoon depends on the silkworm variety, implying that the structure of the cocoon varies with silkworm variety.