• Journal of Environmental Science International
• /
• 제20권11호
• /
• pp.1357-1371
• /
• 2011

Suspended and sinking particles were collected during ODP Leg 119 to the Indian Ocean sector of the Antarctic Ocean. Field work was carried out at four sampling sites in Prydz Bay. Two of these sites were located in the Outer Bay, and two in the Inner Bay. At the four locations, a total of ten deployments of a sediment trap array were made. The concentrations of carotenoids both in suspended and sinking particulate matter in Prydz Bay were analyzed using HPLC. Fucoxanthin was the dominant carotenoid pigments both in suspended and sinking particles. The present study also indicates that 19'-hexanoyoxyfucoxanthin-containing prymesiophytes (Phaeocystis spp.) was abundant in the study area. The flux rates of carotenoids were generally highest at 50 m, and approximately double the flux rates at deeper horizons, however, at Inner Bay sites, the mean flux rates of carotenoids were greatest at 200 m, and 3 times greater than that of 50 m. Such anomalous high fluxes at 200 m imply that grazers were locally abundant between 100 m and 200 m at these sites close to land, and this hypothesis is supported by visual evidence of lots of fecal pellets in the 200 m trap. Integrates standing stocks versus sinking pigments data support that particulate material in Prydz Bay was not recycled rapidly.

• The Plant Pathology Journal
• /
• 제15권2호
• /
• pp.127-130
• /
• 1999

Cytological changes of cowpea root at the early stage of root nodule formation (within 5 days after inoculation) were viewed by light and electron microscopy. The root region affected by the rhizobial infection, which was composed of a redial array of cortical cells, had prominent cell divisions, mostly anticlinal in the inner cortical cells and in addition oblique and periclinal in the outer cells. An infected root hair cell (or root hair-producing epidermal cell) had numerous infection threads and degenerated cytoplasm. Module meristem was formed adjacent to the infected root hair cell, and characterized by dense cytoplasm, prominent nucleus, numerous small vacuoles, and increased plastids, containing infection threads as well. Bacterial cells were dividing inside the infection thread, the wall materials of which appeared to be dissolved ad accumulated in small vacuoles. inner cortical cells contiguous to the nodule meristem appeared to be actively dividing and dedifferentiating; however, they were not infected by the rhizobia. These structural characteristics are similar to those in the Bradyrhizobium-soybean association previously reported, and may reflect the similar cytological process in cowpea in the early nodule formation.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2000년도 정기총회 및 특별심포지움
• /
• pp.19-40
• /
• 2000

We applied both SP monitoring and pole-pole array resistivity surveys and SP survey and dipole-dipole array resistivity survey to leakage problems in several embankments and dike, respectively, to estimate and detect the zone of leakage. The embankment is generally affected by tidal variation and has low resistivity characteristics due to the high saturation of seawater. According to this situation, SP monitoring and resistivity survey using pole-pole electrode array, which is relatively more effective to the conductive media, were carried out to delineate the leakage zones of sea water through the embankment. We checked out electrical conductivity(EC) and temperature variations along the inner part of the embankment to detect the zone of seawater leakage and found that the measured EC value agreed to that of seawater in the leakage zone and the temperature was lower than that of the vicinity of leakage zone. SP monitoring results were coincide with tidal variations at each embankment. Based on the survey results, it is concluded that both SP monitoring and the pole-pole array resistivity method are quite effective for investigation of seawater leakage zones in the embankment.

• Geophysics and Geophysical Exploration
• /
• 제23권4호
• /
• pp.253-260
• /
• 2020

The five-story stone pagoda in Tamni-ri located in Uiseong County in Gyeongsangbuk-do had an unstable upper structure, and the structural deformation of the foundation stone and the stylobate was severe. In order to repair the base of the pagoda, it must be confirmed if there are support stones inside the base. Resistivity survey was performed to study the inner base stone structure during the repair work. The stylobate was exposed soil and broken stones after removing the walls and the cover of the stylobate. Modified pole-dipole array II was used for the resistivity survey, and compared with the typical pole-dipole array method. And in this study, a physical scale-down model experiment was performed to compare and analyze distortions caused by severe topographical undulations such as right-angled lines. The results show that the stylobate of Five-story Stone Pagoda in Tamni-ri Uiseong has base stones inside the reinforced filling soil and are located beneath the pillar of the body and supporting the pagoda.

• The KIPS Transactions:PartA
• /
• 제15A권3호
• /
• pp.161-166
• /
• 2008

In this paper, an efficient digit-serial systolic array is proposed for multiplication in finite field GF($2^m$) using the polynomial basis representation. The proposed systolic array is based on the most significant digit first (MSD-first) multiplication algorithm and produces multiplication results at a rate of one every "m/D" clock cycles, where D is the selected digit size. Since the inner structure of the proposed multiplier is tree-type, critical path increases logarithmically proportional to D. Therefore, the computation delay of the proposed architecture is significantly less than previously proposed digit-serial systolic multipliers whose critical path increases proportional to D. Furthermore, since the new architecture has the features of a high regularity, modularity, and unidirectional data flow, it is well suited to VLSI implementation.

• Journal of the Microelectronics and Packaging Society
• /
• 제18권2호
• /
• pp.29-33
• /
• 2011

Research about the geometry design of lead pin was carried based on the normal or shear stress of the interface between a lead pin and a PCB in terms of delamination failure. The taguchi method with four design factors of three levels and FEA(Finite element Analysis) are carried under $20^{\circ}$ bending and 50 ${\mu}m$ tension of lead pin. The contact width, d2, between head round and copper pad in PCB is the highest affection factor among design factors by analysis of contribution analysis. Equivalent von Mises stress of 18.7% reduction design is obtained by the parameter design of the taguchi method. Maximum normal stress occurred at contact position between solder outer surface and a Cu pad in PCB. Also, maximum shear stress happened at contact position between solder outer surface and SR layer of PCB. From these calculated results, delamination of the PGA package may be occurred from outer interface of solder to inner interface of solder.

• Journal of Ocean Engineering and Technology
• /
• 제26권1호
• /
• pp.41-46
• /
• 2012

A deep-sea manganese nodule miner consists of 4 parts: the pickup device, crusher, disposal device, and tracked vehicle. The tracked vehicle is an essential component to keep the self-propelled miner moving across deep-sea soil. The performances of the tracked vehicle are influenced by noise factors: the shear strength of the seafloor, bottom current, seafloor slope, track speed, reaction forces of flexible hose, etc. It is necessary to adopt a robust design method that improves the performances and minimizes the variation caused by noise factors. Taguchi's method, the most widely known robust design method, searches for the robust optimum using an orthogonal array composed of the product of the inner array and outer array. In this paper, we propose a new screening technique to reduce the number of input factors and apply the MRSN (Multi-Response Signal to Noise) ratio to convert multiple performances into single one in order to overcome the difficulties and limitations of using Taguchi's method in a case with many input factors and multiple performances. A test miner was already designed and tested. It has about 1/10 the capacity of a commercial one and was successfully operated at an in-shore area. Taguchi's robust design was applied to the tracked vehicle of the test miner, and design improvements were implemented for the vehicle.

• Journal of the Korean Magnetics Society
• /
• 제24권5호
• /
• pp.152-159
• /
• 2014

Magnetic gear can transmit torque without any mechanical contact among rotational parts in rotating mechanical systems. Especially, magnetic gear using rare-earth PMs can be used in variety of industry application because of their great power efficiency. Thus, recent trend shows that magnetic gear can be replaced with common mechanical gear. This paper deals with comparison and torque analysis for magnetic gears with parallel and Halbach magnetization according to various design parameters. Using a two dimensional (2D) finite element (FE) analysis, suitable gear ratio is selected. We performed analysis for magnetically connected inner and outer torque with respect to various design parameters including thickness of inner and outer PM, steel pole angle, segments of Halbach array and magnetization pattern of inner and outer PMs. Finally, we can obtain improved design model having parallel and Halbach magnetization with larger torque, compared with an initial design model.

• Journal of Biomedical Engineering Research
• /
• 제44권6호
• /
• pp.404-413
• /
• 2023

In this research, we studied the development of a SUS304 microneedle array based on microfabrication technology and the applicability of Parylene-C thin film, a medical polymer material. First of all, four materials commonly used in the field of medical engineering (SUS304, Ti, PMMA, and PEEK) were selected and a 5 ㎛ Parylene-C thin film was deposited. The applicability of Parylene-C coating to each material was confirmed through SEM analysis, contact angle measurement, surface roughness(Ra) measurement, and adhesion test according to ASTM standards for each specimen. Parylene-C thin film was deposited based on chemical vapor deposition (CVD), and a 5 ㎛ Parylene-C deposition process was established through trial and error. Through characteristic experiments to confirm the applicability of Parylene-C, SUS304 material, which is the easiest to apply Parylene-C coating without pretreatment was selected to develop a microneedle array based on CNC micromachining technology. The CNC micromachining process was divided into a total of 5 steps, and a microneedle array consisting of 19 needles with an inner diameter of 200 ㎛, an outer diameter of 400 ㎛, and a height of 1.4 mm was designed and manufactured. Finally, a 5 ㎛ Parylene-C coated microneedle array was developed, which presented future research directions in the field of microneedle-based drug delivery systems.

• The Bulletin of The Korean Astronomical Society
• /
• 제40권1호
• /
• pp.67.2-67.2
• /
• 2015

We report Atacama Large Millimeter/submillimeter Array (ALMA) cycle I observations of L1527, a class 0 object with an infalling envelope and a rotating disk. HCO+ and HCN J=4-3 show strong redshifted absorption against the bright continuum emission associated with the optically thick disk or inner envelope. This redshifted absorption dip is an unambiguous evidence of infall. In addition, these lines and CS J=7-6 present the Keplerian rotation profile at their position-velocity diagrams, suggesting the formation of a Keplerian disk very early in star formation. We will present a model combining an infalling envelope and a Keplerian disk to fit the ALMA observations.