• Advances in aircraft and spacecraft science
• /
• 제1권4호
• /
• pp.399-408
• /
• 2014

The flowfields inside a contour and a conical nozzle exhausting into a straight cylindrical supersonic diffuser are computed by solving numerically axisymmetric turbulent compressible Navier-Stokes equations for stagnation to ambient pressure ratios in the range 20 to 34. The diffuser inlet-to-nozzle throat area ratio and exit-to-throat area ratio are 21.77, and length-to-diameter ratio of the diffuser is 5. The flow characteristics of the conical and contour nozzle are compared with the help of velocity vector and Mach contour plots. The variations of Mach number along the centre line and wall of the conical nozzle, contour nozzle and the straight supersonic diffuser indicate the location of the shock and flow characteristics. The main aim of the present analysis is to delineate the flowfields of conical and contour nozzles operating under identical conditions and exhausting into a straight cylindrical supersonic diffuser.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.18-28
• /
• 2016

듀얼 벨 노즐을 평가하기 위한 기초연구로써 전산수치해석을 진행하였다. 추후 진행할 설계 변수 연구를 위해 듀얼 벨 노즐을 설계하고 입구 조건과 난류 모델, 최적 격자수를 선정하였다. 듀얼 벨 노즐은 KSLV-II 1단 노즐을 기반으로 설계하였다. 입구 조건은 설계 값과의 비교를 통해 비반응 8화학종의 동결유동 모델로 결정하였다. 난류 모델은 SST $k-{\omega}$ 모델이 가장 적합하였다. 격자 민감도 해석을 통해 약 15만개의 최적 격자수를 선정하였다. 본 연구에서 결정한 내용들을 바탕으로 향후 한국형발사체에 듀얼 벨 노즐을 적용한 해석을 진행하여 성능 이득을 연구하고자 한다.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1061-1066
• /
• 2011

본 연구에서는 절삭가공 시 생산성 향상을 위해 사용되는 고압분사 홀더(hp holder)에 들어가는 노즐의 유동특성을 파악하였다. 집중형의 노즐 분사형태를 유지하면서 분사되는 유동에 영향을 주는 설계인자로 입구 유입속도, 노즐 유입각도, 노즐 출구직경을 설정하여 이에 대한 수치해석을 수행하였다. 그 결과 입구 유입속도가 높을수록, 노즐 출구직경이 작을수록 분사되는 유체의 압력과 속도가 높은 것으로 나타났다. 노즐 유입각도의 경우에는 각도변화에 따른 유동특성의 차이가 크지 않았지만 약 $15^{\circ}$일 때가 가장 높은 유동특성을 보였다. 또한 결과값을 이용하여 분사되는 유체의 힘에 의해 가공 시 발생하는 칩의 제거 가능 여부를 확인해 보았다.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.2610-2616
• /
• 2014

이젝터는 펌프의 일종으로서 고압의 유체가 지닌 압력에너지를 이용하여 흡입 유체를 빨아들여 이송하는 기계장치이다. 본 논문은 유한체적법 기반의 CFD 분석을 이용하여 이젝터의 성능에 영향을 미치는 혼합실 형상에 따른 영향을 조사하였다. 혼합실 내부의 노즐 직경과 노즐목 길이, 그리고 노즐 끝단과 유체가 외부로 빠져나가는 디퓨저 입구까지의 거리를 변화시키면서 성능을 좌우하는 흡입유체가 가장 잘 흡입되는 최적의 조건을 조사하였다. 연구 결과 이젝터의 성능은 노즐의 직경이 가장 큰 영향을 나타내는 것을 확인하였다. 혼합실 내부 노즐의 직경이 감소함에 따라 혼입율이 증가하는 것을 확인하였고 노즐 직경이 증가할수록 혼입율이 감소되는 것을 확인하였다. 반면 노즐목 길이, 노즐끝단과 디퓨저 입구까지의 거리에 대한 영향은 미비한 것으로 확인되었다. 마지막으로 CFD분석 자료를 토대로 인공신경망을 이용하여 더욱 구체적인 이젝터 혼합실 형상, 노즐 직경 23.8mm를 제시하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.403-408
• /
• 2001

The flow characteristics of impinging jet flow are affected greatly by nozzle plate to distance. An sharp edge nozzle was used to achieve uniform mean velocity at the nozzle inlet, and its diameter is 10 mm(d). Therefore, the flow characteristics on the impinging jet plate can be changed largely by the control of main flow. In the parent study, we investigate the effects of main flow length, its variable is nozle plate to distances(12d, 10d, 8d, 6d and 4d)

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.54-59
• /
• 2000

A numerical study of axisymmetric rocket main nozzle flow has been accomplished. The CSCM upwind flux difference splitting method with an iterative time marching scheme having second order accuracy in time and space has been used to simulate unsteady flow characteristics in an axisymmetric rocket main nozzle. Though the pressure vary at nozzle inlet with the lapse of time, Mach No. and the density were not changed significontly compared with the temperature. Specific heat ratio $\gamma$=1.134 predicted higher temperature at nozzle throat and exit and nondimensional thrust coefficients at exit than specific heat ratio $\gamma$=1.4 did.

• 대한기계학회논문집B
• /
• 제20권4호
• /
• pp.1395-1405
• /
• 1996

The purpose of this experimental research is to investigate the local heat transfer characteristics in the upward free water jet impinged on a downward flat plate of uniform heat flux. The inner shape of rectangular nozzle used was sine curve type and its contraction ratio of inlet to outlet area was five. Experimental parameters considered were Reynolds number, nozzle exit-flat plate distance, and level of supplementary water. Local Nusselt number was influenced by Reynolds number, Prandtl number, supplementary water level, and distance between the nozzle exit and flat plate. Within the impingement region, the Nusselt number has a maximum value on the nozzle center axis and decreases monotonically outward from center. Outside of the impingement region, on the other hand, the Nusselt number has a secondary peak near the position where the distance from nozzle center reaches four times the nozzle width. However if nozzle exit velocity exceeds 6.2 m/s, the secondary peak appears also in the impingement region. The empirical equation for the stagnation heat transfer is a function of Prandtl, Reynolds, and axial distance from the nozzle exit. The optimum level of supplementary water to augment the heat transfer rate at stagnation point was found to be twice the nozzle width.

• 대한기계학회논문집B
• /
• 제33권4호
• /
• pp.215-224
• /
• 2009

Analysis for various driven nozzle position changes. The analysis was done for different Reynolds number in entrance region of jet-pump and for several diameter ratios of driven nozzle. (1) The largest absorption energy was found at the point s=1 in condition of diameter ratio 1:3.21 and point s=0.5 in condition of diameter ratio 1:2.25. (2) The absorption energy was not related to the change of entrance velocity and the driven nozzle position having the largest absorption energy was function for cross section ratio. (3) As the position of driven nozzle moves to the downstream, the absorption energy gets weaker. Because the energy from swirl was lost at the cross section gets smaller. (4) As the position of driven nozzle moves to the downstream, the injection energy leans to the upper direction wall and as the Reynolds number increase, the lean phenomenon is more distinct. (5) The flow quantity of driven nozzle, the diameter ratio 1:3.21, was 32% higher than that of 1 : 2.25 and as the inlet velocity gets faster the efficiency decreased. And as the cross section of the driven nozzle increases.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4027-4035
• /
• 1996

Accuracy of gas flow measurements using sonic nozzle and factors which influence on the discharge coefficients of sonic nozzle are investigated with high pressure gas flow standard measurement system. The gas flow measurement system comprises two compressors, storage tank, temperature control loop, sonic nozzle test section, weighing tank, gyroscopic scale and data acquisition system. The experiments are performed at various nozzle throat diameter and inlet pressure. Overall uncertainty of discharge coefficients is estimated to less than .+-.0.2% and most of experimental data fall into this range. Dependence of discharge coefficients on the Reynolds number is good agreement with those suggested in ISO document. The influence of swirl on the discharge coefficients becomes greater as the nozzle throat diameter is enlarged. The discharge coefficient of conical nozzle shows about 4.5% lower discharge coefficients than those of toroidal nozzle, but variation trend with Reynolds number is very similar each other and reproducibility of data is very good.

• 한국산업융합학회 논문집
• /
• 제22권5호
• /
• pp.553-559
• /
• 2019

Various types of nozzles have been used to cope with fire in ships. However, in Korea, precise nozzles that perform fine spraying function are required for fire fighting in case of fire in a ship, and most of these nozzles depend on imports. Therefore, in this study, we developed various types of nozzles to develop the water spray nozzle for evolving fire in the engine room of the ship, and developed an optimal nozzle through flow analysis and fire test. For this purpose, we selected the materials that can satisfy the characteristics of existing nozzle materials and developed the design technology and processing technology in the nozzle considering fluid flow to achieve optimal water spraying performance. In order to develop an optimal nozzle, the flow through the finite element analysis was first analyzed and the nozzle was manufactured. As a result of flow analysis of the developed nozzle, the maximum velocity at the outlets of four holes at 0.3 MPa was about 3m/s and about 0.15 MPa. In addition, when the pressure at the inlet was 1.8 MPa, it showed the outlet speed of about 18m/s and a pressure of 1.2 MPa.