• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.596-608
• /
• 1997

The purpose of this study was to compare the apical leakage and adaptation to the dentinal wall of a glass ionomer root canal cement(Ketac-Endo) with those of AH-26 and Tubli-Seal. 102 single-rooted teeth were insrumented with step-back technique and randomly divided into four groups according to kinds of root canal cements: Ketac-Endo, AH-26, Tubli-Seal, and no root canal cement. Four experimental groups were as follows; Group 1 : Filling with gutta-percha and Ketac-Endo Group 2 : Filling with gutta-percha and AH-26 Group 3 : Filling with gutta-percha and Tubli-Seal Group 4 : Filling with gutta-percha without root canal cement All the specimens were obturated with lateral condensation technique, and stored in 100% humidity for 4 days. 20 teeth in each group were placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. And they were evaluated for linear dye leakage using a stereoscope and analyzed by one-way ANOVA. 22 teeth were split longitudinally and evaluated the adaptation to the dentinal wall using scanning electron microscope(4 teeth in each group) and stereoscope(2 teeth in 1, 2, 3 group). The obtained results were as follows ; 1. In case of not used root canal cement(Group 4), there was showed much degree of dye penetration comparerd with used root canal cements (Group 1, 2, 3)(P<0.01). 2. In the case of used root canal cements(Group 1, 2, 3), there was no significant difference in linear leakage in groups(P>0.01). 3. In the case of used root canal cements(Group 1, 2, 3), there was showed intimate adaptation to the dentinal wall independent on kinds of root canal cements. 4. Fractured surfaces indicated failure of cohesion in Ketac-Endo, and failure of adhesion to dentine in AH-26 and Tubli-Seal. 5. According to similar apical leakage and adaptability to the dentinal wall to another root canal cements, it is possible to be used glass-ionomer cement as root canal cement.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.671-684
• /
• 1995

The purpose of this study was to compare the apical sealing ability, overfilling and obturation of lateral canals using two gutta-percha techniques: Thermafil obturators and cold lateral condensation. Eighty numbered epoxide blocks with one major and five lateral canals were divided into four experimental groups and obturated according to experimental groups. Four experimental groups were as follows: Group 1 : Filling with Thermafil plastic obturators and sealer(ThermaSeal) Group 2 : Filling with Thermafil plastic obturators only, without sealer(ThermaSeal) Group 3 : Fillng using lateral condensation with sealer(AH-26) Group 4 : Fillng using lateral condensation without sealer(AH-26) All the blocks were stored in 100% relative humidor at room temperature for 7 days. Each block was placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. Apical leakage was measured from the apical foramen to the most coronal level of dye penetration in millimeter under a stereoscope. The length of gutta-percha and sealer in each of the lateral canals was measured, too. The presence or absence of overfilling of gutta-percha and sealer was recorded. The data was analyzed by one-way ANOVA. The obtained results were as follows: l. Apical dye leakage was almost: not occurred in Group Willed with Thermafil and sealer) and Group 3(filled using lateral condensation with sealer), and there was no significant difference in linear leakage between two groups(p>0.01). 2. In both Thermafil and lateral condensation groups, linear leakage of Group I, 3(filled with sealer) was less than that of Group 2, 4(filled without sealer), and there was no significant difference in linear leakage between Group 1, 2, 3(p> 0.01). 3. Overfilling during obturation of Group 1, 2(filled with Thermafil) was more than Group 3, 4(filled using lateral condensation), and there was no significant difference between groups(p> 0.05). 4. Groups filled with Thermafil had significantly more gutta-percha than groups filled using lateral condensation in all lateral canals(p <0.01), the total length of gutta-percha and sealer found in all lateral canals were similar in Group 1 and Group 3.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.236-246
• /
• 1998

The purpose of this study was to compare the degree of micro- leakage of new glass ionomer root canal sealer, Ketac-Endo(ESPE Co., Seefeld, Germany) with that of AH-26(De Trey Co., Ltd., U.S.A.). Root canal treatment using K -file, H -file, Gate Glidden drill was conducted on 49 extracted single-rooted teeth. 45 teeth were randomly divided into 3 experimental groups(15 teeth per group) and 4 teeth were used as the control group. Group 1 was used AH -26 sealer with the lateral condensation method for canal filling, group 2 was used Ketac-Endo with the single cone method and group 3 was used Ketac-Endo with the lateral condensation method. The control group was obturated with the single cone method without sealer. The teeth were covered with two coats of nail varnish after 48 hours of obturation. The teeth were immersed in India ink for 1 week and cleaned with methyl salicylate and then the degree of dye penetration were measured with stereomicroscope. The data were analyzed statistically by one-way ANOVA. The results were as follows: 1. 7 teeth in group 1, 5 in group 2, and 3 in group 3, were showed evidence of microleakage implying appropriate canal filling. 2, The mean average of microleakage was $0.17{\pm}0.32mm$ in group 1, $0.30{\pm}0.37mm$ in group 2. $0.10{\pm}0.21mm$ in group 3, showing that canal filling using the lateral condensation canal filling method with Ketac-Endo showed the least microleakage and using the single cone method with Ketac-Endo showed the largest amount of microleakage, 3. There were no statistically significant difference in the variation of microleakage among groups. From the results above, Ketac-Endo which has the advantage of glass ionomer, whether using the single cone method or the lateral condensation method, showed similar results as AH-26, but for clinical application it is thought that were studies on the properties of Ketac-Endo should be followed.

• 한국포장학회지
• /
• 제27권1호
• /
• pp.9-16
• /
• 2021

The present study was conducted to accomplish management efficiency by preparing preemptive measures for consumer dissatisfaction and overcome risks caused by Global Warming through studies of model cases in packaging. Through this study, we made it possible to find a way for companies to prepare for Global warming and consumer dissatisfaction. By contributing to eco-friendly packaging, we are trying to preemptively respond to recent major issues through packaging. Through this experiment, we tried to measure the degree of penetration of Plodia interpunctella H. larva into the insect repellent film produced by printing Ink containing a natural repellent. The control experiment was conducted with an untreated LDPE film to which no insect repellent was applied. The numbers decreased from 17 to 7 when the film was processed with repellent to show experimental results verifying effects of repellent by decrease in 10 (58.8% Decrease). Such results show that it is safe when the film is unfolded but in the case where the film is folded, the Plodia interpunctella H. punches through the film to lead to consumer dissatisfaction and it suggests that this can bring on risks to corporate management. Considering that most of the film is folded in the case of PE bag packaging, the direction which the corporations should take in terms of preparing for climate change countermeasures and consumer dissatisfaction has been clarified. Due to it receiving satisfactory results in safety rest results for printing film applied with pest repellent as well as the Quality analysis to test repellent contents of repellent film, it is certain that the importance of repellent method in packaging will increase in preparing for consumer dissatisfaction and actions against climate change henceforth.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.59-68
• /
• 2023

Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.307-315
• /
• 2001

The application of Nd:YAG laser and irrigants to the root surface can change its surface configurations. The purpose of this study was to investigate the effects of Nd:YAG laser and irrigants on the apical seal of obturated canals. In this study, 66 single rooted teeth were randomly assigned to 4 group of 14 teeth each. 8 teeth were served us positive and negative controls. The teeth were divided into 6 groups as follows. Group A: Nd:YAG laser, 5% NaOCl + Rc-prep Group B: Nd:YAG laser, Saline Group C: 5% NaOCl + Rc-prep Group D: Saline Group E: Positive control Group F: Negative control 66 teeth were instrumented using Maillefer ProFile$^{\circledR}$ (Orifice Shapers, .04 taper, .06 taper Dentsply, Switzerland). Two of each group were selected at random, and the canal wall surfaces were examined under a SEM. 12 teeth of each group were obturated using by lateral condensation technique. Specimens were immersed in india ink for 7days, decalcified by 10% nitric acid, dehydrated by 75. 80. 85, 90, 95 and 100% alcohol in order cleared by methyl salicylate and then measured of dye penetration with stereomicroscope($\times$15 magnification) and Image Pro plus. The data were analyzed statistically by one-way ANOVA test and Duncan's Multiple Range test. The results were as follows : 1. The mean leakage was 0.128$\pm$0.376 for group A, 0.237$\pm$0.325 for group B, 0.397$\pm$0.468 for group C, 0.586$\pm$0.402 for group D, and there were statistically significant differences between group A and group D, group B and group D. (p<0.05). 2. Group A had better sealing ability than Group C, but there was statistically no significant differences. (p>0.05). 3. Group B had better sealing ability than Group D and there was statistically significant difference. (p<0.05). 4 Group A had better sealing ability than Group B, but there was statistically no significant difference. (p>0.05). 5. Group C had better sealing ability than Group D, but there was statistically no significant difference. (p>0.05). 6. As a result of observation under SEM, Smear layers were removed in Group A, B. but Smear layers were partially removed and smear plugs were remained in Group C, Smear layers were not removed in Group D. To be specially, Melting of smear layer were showed in Group C. 7. These results suggests that the laser has a potential in reducing the apical microleakage of obturated canals.

• 헤리티지:역사와 과학
• /
• 제52권4호
• /
• pp.226-245
• /
• 2019

보물 제1259호로 지정된 법주사 <괘불탱>은 1766년에 조성되었으며, 화면 중앙에 여래를 단독으로 배치한 독존형식의 괘불화이다. 법주사본은 현존하는 괘불화 중에서 세로 폭이 가장 긴 작품이자 18세기의 대표적인 화사인 두훈이 조성하였다. 두훈이 제작한 괘불화는 법주사본과 더불어 통도사 <석가여래괘불탱>(1767)이 현존한다. 두 작품은 도상이 같기 때문에 동일한 초본을 사용하였을 것으로 추정되는데, 1년이라는 시간 차이가 있음에도 대부분의 화사가 교체되었기 때문에 수화사인 두훈의 역량을 확인할 수 있다. 이 중 법주사본은 통도사본보다 먼저 제작되었을 뿐만 아니라 화기를 통하여 왕실과 연관성이 엿보이므로 중요한 의미를 가진다. 법주사에는 영빈이씨의 위패를 모시던 선희궁 원당이 존재한다. 이 원당은 1765년에 건립되어 법주사본이 왕실과 관련이 있을 것으로 추정할 수 있는 근거가 된다. 특히 법주사본 화기에 등장하는 비혼의 여성 집단에 주목할 수 있다. 이들 중 경진생 이씨를 비롯한 일부 인물들이 영빈과 화완옹주가 시주에 참여한 봉인사 불사에도 이름을 올리고 있어 영빈과 관련된 궁녀들임을 추정할 수 있다. 이와 더불어 법주사본 하단에 '주상주삼전하수만세(主上主三殿下壽萬歲)'라고 강조된 축원문을 통하여 법주사본과 왕실의 관련성을 확인할 수 있다. 또한 미술사적 특징뿐만 아니라 과학 분석도 함께 접근하였는데, 먼저 법주사 <괘불탱>의 손상 유형을 보면 꺾임과 접힘, 주름이 관찰되며 습해로 인한 화면 얼룩, 안료 박락, 안료 점상형 박락, 뒷면 배접지에 안료 이염 등이 관찰된다. 채색 안료 분석 결과를 보면 백색 안료는 연백을 사용하였으며 흑색 안료는 먹과 니람을 사용했다. 적색 안료는 진사와 연단을 단독으로 사용하거나 혼합하여 사용하였으며 자주색은 유기염료를 사용한 것으로 추정된다. 황색은 육색에서는 연백과 등황을 혼합하여 사용하거나 연백 위에 등황으로 중첩 채색하였고 보관은 금박을 사용하였다. 녹색 안료는 염화동(녹염동광)을 단독으로 사용하거나 염화동(녹염동광)과 공작석을 혼합 사용하였다. 청색 안료는 석청과 회청을 단독으로 사용하거나 혼합 사용하였다.