• 한국안전학회지
• /
• 제31권2호
• /
• pp.76-82
• /
• 2016

A 2-D hydrodynamic model for predicting the movement of debris flow was developed. The developed model was validated against a dam break flow problem conducted in EU CADAM project, and the performance of the model was shown to be satisfactory. In order to suggest structural alternative for hazardous zone vulnerable to debris flow disaster, two types of initial mass distribution and two shapes of defensive structure were considered. It was found that 1) the collapse of debris mass initiated with square pyramid shape induced more damage compared with that of cubic shape; and 2) a defensive structure with semi-circular shape was vulnerable to debris flow disaster in terms of debris control or primary defense compared with that of rectangular-shaped structure.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.76-83
• /
• 2016

The various model tests are carried out to estimate and verify a ship performance in the design stage. But in view of the cost, the model test should be applied to every project vessel is very inefficient. Therefore, other methods of predicting the maneuverability with confined data are required at the initial design stage. The purpose of this study is to estimate the hydrodynamic derivatives by using the multiple regression analysis and PMM test data. The characteristics of the stern shape which has an important effect on the maneuverability are applied to the regression analysis in this study. The correlation analysis is performed to select the proper hull form coefficients and stern shape factors used as the variables in the regression analysis. The comparative analysis of estimate results and model test results is conducted on two ships to investigate the effectiveness of the maneuvering hydrodynamic derivatives estimation applied the stern shape. Through the present study, it is verified that the estimation using the stern shape factors as the variables are valid when the stern shape factors are located in the center of the database.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권2호
• /
• pp.263-276
• /
• 2013

Most yacht sails are made of thin fabric, and they have a cambered shape to generate lift force; however, their shape can be easily deformed by wind pressure. Deformation of the sail shape changes the flow characteristics over the sail, which in turn further deforms the sail shape. Therefore, fluid-structure interaction (FSI) analysis is applied for the precise evaluation or optimization of the sail design. In this study, fluid flow analyses are performed for the main sail of a 30-foot yacht, and the results are applied to loading conditions for structural analyses. By applying the supporting forces from the rig, such as the mast and boom-end outhaul, as boundary conditions for structural analysis, the deformed sail shape is identified. Both the flow analyses and the structural analyses are iteratively carried out for the deformed sail shape. A comparison of the flow characteristics and surface pressures over the deformed sail shape with those over the initial shape shows that a considerable difference exists between the two and that FSI analysis is suitable for application to sail design.

• 한국강구조학회 논문집
• /
• 제10권1호통권34호
• /
• pp.73-83
• /
• 1998

초기인장력 변화에 따른 구조물의 동적거동은 초기인장력의 감소에 따라 기하학적 비선형성은 증가하고 고차모드의 영향이 지배적이고 phase portrait는 period attractor가 복잡한 양상으로 발생하였으며, 초기인장력의 증가에 따라 비선형 해석결과와 선형 해석결과의 차이는 감소하였고 1차모드가 지배적인 모드로 작용하고 phase portrait는 period attractor가 일정한 영역에서 규칙적으로 발생함을 알 수 있었다. 이와 같은 결과는 Lanczos 모드해석과 같이 모드축소법을 이용하는 비선형 동적해석에서 유용한 정보를 제공할 수 있으며. 현실적으로 비선형 동적해석에 소요되는 시간과 노력이 매우 크다는 것을 감안할 때 초기인장력에 따라 모드축소법에 기여하는 모드를 결정하면 정확한 동적응답을 얻을 수 있다.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.133-139
• /
• 2017

The timing chain system, which is a typical power transmission technology applied to a vehicle, has been widely used by the automotive industry because it is normally designed to last a car's lifetime. However, the timing chain system may cause some problems due to the shape of the chains and the polygonal behavior on contact between the chain and the sprocket. In addition, noise and vibration caused by transmission error are the most typical problems encountered by major automotive manufacturers and they are considered as the main source of customer complaint. The initial tension of the chain-sprocket system is thought to be the main cause of transmission error, and it is regarded as the source of engine vibration and noise. The initial tension of the chain system should be controlled carefully since a low initial tension can cause twisting, which may lead to a system malfunction, while a high initial tension can reduce the service life due to a worn down contact surface. In this paper, the kinematic analysis model is generated with various initial tensions, which are controlled by changing the shape of the fixed guide with the largest contact surface with chain. The results showed that the transmission error was minimized on a particular range of initial tension, and the tendency showed that the error changed with a higher sensitivity at a lower initial tension.

• 대한기계학회논문집A
• /
• 제30권1호
• /
• pp.76-83
• /
• 2006

This paper addresses the method for the shape design sensitivity analysis of the buckling load in the continuous elastic body. The sensitivity formula for critical load is analytically derived and expressed in terms of shape variation, based on the continuum formulation of the stability problem. Though the buckling problem is more efficiently solved by the structural elements such as beam and shell, the elastic solids are considered in this paper because the solid elements can be used in general for any kind of structures whether they are thick or thin. The initial stress and buckling analysis is carried out by the commercial analysis code ANSYS. The sensitivity is computed by using the mathematical package MATLAB using the results of ANSYS. Several problems including straight and curved beams under compressive load, ring under pressure load, thin-walled section and bottle shaped column are chosen to illustrate the efficiency of the presented method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.841-846
• /
• 2006

This paper addresses the method for the shape design sensitivity analysis of the buckling load in the continuous elastic body. The sensitivity formula for critical load is analytically derived and expressed in terms of shape variation, based on the continuum formulation of the stability problem. Though the buckling problem is more efficiently solved by the structural elements such as beam and shell, the elastic solids are considered in this paper because the solid elements can be used in general for any kind of structures whether they are thick or thin. The initial stress and buckling analysis is carried out by the commercial analysis code ANSYS. The sensitivity is computed by using the mathematical package MATLAB using the results of ANSYS. Several problems including straight and curved beams under compressive load, ring under pressure load, thin-walled section are chosen to illustrate the efficiency of the presented method.

• 인터넷정보학회논문지
• /
• 제10권5호
• /
• pp.183-194
• /
• 2009

본 논문에서는 인터넷상에 업로드되는 음란 영상물을 차단하기 위해 활동적 형태 모델(active shape model)을 이용한 유해 영상 탐지 방법을 제안한다. 본 논문에서는 활동적 형태 모델을 이용하여 가슴선의 형태를 주성분 분석(Principle Component Analysis)과 정렬을 통해서 학습하고, 각 제어점에 대응하는 화소값 분포를 학습한다. 그리고 학습된 형태와 화소값 분포를 이용하여 가슴선을 찾는다. 본 논문에서는 형태 모델의 초기 위치를 정확하게 선택하기 위해 스케일, 회전, 이동에 관한 파라미터를 추출한다. 이 정보를 획득하기 위해서 본 논문에서는 유두 부분의 위치를 찾고, 유두 위치로부터 모든 방향으로 방사하여 후보 가슴선을 찾는다. 이와 같이 검출한 가슴선 정보를 이용하여 스케일과 회전 값을 찾아 평균 형태(mean shape)를 위치시키고, 활동적 형태 모델을 반복적으로 탐색한다. 최종적으로 수렴한 형태의 제어점(landmark)과 후보 가슴선과의 거리 평균을 계산하여 유해영상의 유무를 판단한다.

• 대한조선학회지
• /
• 제20권4호
• /
• pp.1-8
• /
• 1983

This paper describes the application of the finite element method to the large deflection elastic plastic analysis and ultimate load calculation of axisymmetric shell of revolution with initial imperfection subjected to external pressure. The nonlinear equilibrium equations are linearized by the successive incremental method and are solved by the combination of load increment and iteration scheme with considering plastic deformation theory. To get the more realistic effect of large deflection, corrected coordinats and directions of applied load ar every load increment steps are used. The effects of the plasticity, initial imperfection and the shape of shells on the ultimate load of clamped circular cap under external pressure are investigated. Consequently, the following conclusions are obtained; (1) At same geometric parameter $\lambda$, each shape of clamped circular caps yield same elastic ultimate loads in both cases, i.e. with and without initial imperfections, whereas, in the case of elastic-plastic state the shell becomes thicker, the ultimate loads are getting smaller. (2) The effects of initial imperfection to ultimate load are most significant in the elastic case and are more senstive in the elastic-plastic state with the thinner shells.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.83-88
• /
• 2004

최근 강구조물과 해양구조물에 있어서 박판 부재인 고장력강이 널리 사용되면서 좌굴이 발생할 가능성이 커지고 있다. 특히 선박구조는 상자형 박판 구조물로서 용접이나 절단등의 열 가공에 의하여 필연적으로 판부재에 초기처짐이 발생하게 된다. 이러한 초기처짐은 박판부재가 좌굴을 동반한 복잡한 비선형 거동을 나타낼 때 악영향을 미치는 요소이다. 결과적으로 선체구조물이나 해양구조물에 안정성과 정확성을 부여하기 위해서는 발생 가능한 초기처짐을 이상화 하여 2차좌굴을 고려한 초기구조설계에 반영하여야 한다. 본 연구에서는 종방향 압축하중이 작용하고 네변 단순지지조건인 판에 실제 계측된 여러 가지 초기처짐형상을 적용한 유한요소 시리즈 해석을 하였다. 해석방법으로서는 범용유한요소프로그램인 ANSYS의 탄소성대변형 유한요소법을 적용하였고 해석제어는 Newton-Raphson method와 An-length method를 병용하였다.