• Journal of the Korean Society of Food Culture
• /
• v.39 no.2
• /
• pp.119-126
• /
• 2024

This study was conducted to examine the microbiological quality indicators (total bacterial count and coliform count) and physicochemical quality indicators (pH, redness, volatile basic nitrogen [VBN] content) of meat according to various storage temperatures (-20~15℃) and packaging methods (wrap, vacuum). Based on these results, we proposed a safe consumption period. Redness, pH, and VBN content were not considered appropriate for setting the expiration date, as the redness and pH of the meat after spoilage were better than the standard values for both vacuum and wrap packaging (p<0.05). Additionally, the VBN content at 2 and 4℃ increased slightly (fresh level) until the initial time of spoilage (1.0×10⁶ colony-forming unit [CFU]/cm²) and then increased rapidly thereafter. Therefore, the results were not consistent with microbial spoilage. When the decay point was evaluated based on the presence of microorganisms, vacuum packaging extended the storage period approximately 2.5-fold when compared with wrap packaging, and the meat could be stored at 2 or 4℃ for 40 or 23 days, respectively. Therefore, to evaluate meat quality, microbial indicators should be considered first. The microbiological standards proposed in this study can be used for safety management during the distribution of meat. However, to ensure meat safety, additional investigations of appropriate indicators of freshness must be conducted.

• Computers and Concrete
• /
• v.33 no.6
• /
• pp.707-724
• /
• 2024

This paper proposes a study of cement replacement with rice husk ash (RHA) and eggshell ash (ESA) for enhanced mechanical properties of geopolymer (GP) concrete with and without admixture. The main objective is to investigate the mechanical properties of GP with various replacement levels of Pozzolana Portland cement by RHA and ESA. The GP resistance to durability is examined and impact of ash materials on concrete's durability performance is determined. The environmental benefits of using agricultural waste materials in GP manufacturing minimize cement usage and CO2 emissions. The goal is to assess value of RHA-ESA of building material, paving stones for structures to lessen environmental impact. The novelty lies in use of ESA and RHA as partial replacements for cement and investigation of admixtures to enhance concrete properties, and reduce environmental impact. The research contributes by introducing a novel approach to reducing cement consumption by using ESA and RHA to address environmental concerns. It also explores the potential benefits of admixtures improving concrete performance and reducing environmental pollution. A study is carried with and without impacts of admixture to find compressive strength of GP cubes. The cement has been replaced by RHA and ESA in the range of (2.5%+7.5%, 5%+5%, 7.5%+2.5) by weight of cement for M20 mix. The compressive strength (CS) and split tensile strength (STS) at 7days, 14 days and 28 days is obtained as 21 N/mm2 at 7.5%RHA+2.5%ESA and 2.3 at 7.5%RHA+2.5%ESA, 24 N/mm2 at 7.5%RHA+2.5%ESA and 2.3 at 7.5%RHA+2.5%ESA, 28 N/mm2 at 7.5%RHA+2.5%ESA and 2.8 at 7.5%ESA respectively with normal curing condition.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.128-135
• /
• 2011

In this study, in order to develop ultra rapid hardening mortar(URHM) for tunnel repairs using bottom ash of low recycle ratio and Admixture as Eco concept, fundamental properties of URHM on temperature condition of construction field were performed. Test result, URHM of three types for fluidity and setting time were as in the following : B > C > A. Those for low temperatures were later than the standard condition. Compressive, bending and bond strength were similar with three types as follow. In compressive strength, initial strength of the low were smaller than the standard but the low in the long-term were similar with the standard. On the contrary to this, bending strength were similar in initial strength but the low in the long-term were smaller than the standard. The low in bond strength was average 35% less than the standard. Length changes was as in the following : A > C > B. the low is two times much as the standard but the case using blast furnace slag particles noticeably reduced length changes. Water absorption coefficient and water vapor resistance were as in the following : C > A > B. In case of URHM added bottom ash, water absorption coefficient and water vapor resistance were increased because bottom ash is porous material.

• The Korean Nurse
• /
• v.36 no.2
• /
• pp.73-83
• /
• 1997

Bed rest is recommended to prevent postlumbar puncture headaches(PLPHA), but the period of bed rest varies in the literature from 6 hours to 24 hours. In clinical practice the period of bed rest varies but nursing methods for adults and children have little difference. In Seoul National University Hospital, children have been given at least 6 hours bed rest after a lumbar puncture. Pediatric oncology patients require a lumbar puncture for an initial diagnosis, follow up treatment or administration of chemotherapeutic agent. But it is difficult for young children to lie supine or to refrain from their usual activities in any way, and unpleasant problems related to a shortage of beds often occurs during discharge or in an outpatient setting. The purpose of this study is to substantiate the preventive effect of PLPHA by the period of bed rest, to identify the other factors that influence PLPHA, and to use the nursing methods proper to children. The subjects were 65 children, ages 1-17, undergoing treatment in the children's cancer center at SNUCH during the period June 1, 1995, to Aug. 31, 1995. The team nurses asked questions about PLPHA of the parents and children in order to fill out a questionnaire. The data were evaluated by percent, t-test, Chi-square test and Mann-Whitney U test. Result; 1. There was no significant difference relating the bed rest time spent to the occurrence of postspinal headaches (t-test). 2. There was a significant risk of PLPHA in the children who were irritable before procedure and/or had experienced previous PLPHA(p<0.05, ${x^2}-test$). 3. The following factors were not found to be associated with increased risk of PLPHA: previous puncture experience, giving analgesics, the choice of puncturist, inpatient/outpatient status, gauge of needle, purpose, the amount of CSF removed, gender, diagnosis, the number of peripheral WBCs, previous lumbago experience after LP, position after bed rest, age, the number of aural puncture at the time. A longer period of bed rest is unlikely to be more effective to prevent PLPHA and seems impractical. A shorter period will save time and effort. Perhaps it will also allay some of the fears which surround LP. So 1 hour bed rest after LP is suggested and nursing methods for emotional support should be investigated to reduce PLPH.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.1
• /
• pp.64-91
• /
• 2018

This study explores the interactive pattern among social issue, academic research, and governmental policy on science and technology during the last 20 years. In particular, we try understand wether the science and technology policy research and governmental policy meets social needs appropriately. In order to do this, we have collected text data from news articles, papers, and governmental documents. Based on these data, social network analysis and cluster analysis has been carried out. According to the results, we have found that science and technology policy researches tend to focus on fragmented technological innovation meeting urgent practical needs at the initial stage. However, recently, the main characteristics of science and technology policy research shows co-evolutionary patterns responding to society. Furthermore, time lag also has been observed in the process of interaction among the three bodies. Based on these results, we put forward some suggestions for upcoming researches in science and technology policy. Firstly, analysis levels are needed to be shifted from micro level to mezo or macro level. Secondly, more research efforts are required to be focused on policy process in science technology and its public management. Finally, we have to enhance the sensitiveness to social issues through studies on agenda setting in science and technology policy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.44-50
• /
• 2016

A study to apply phase change material(PCM) to rapid hardening cement paste forming semi-rigid pavement was carried out. The characteristics fresh and hardened paste were evaluated through the experiment for a total of 6 mixtures according to the cement type and the substitution of phase change material for acrylate. The fluidity by substituting phase change material for acrylate satisfied the target flow time of 10 to 13 seconds. In case of setting time, it was possible to secure the performance of rapid hardening cement by substituting phase change material, and if the substitution ratio over 60%, the initial set occurred 1 to 2 minutes faster than other mixtures. In case of compressive strength and bond strength, it showed similar strength characteristics with the plain mixture, and it satisfied both the target compressive and bonding strength of 36MPa and 2MPa. The mixture substituting phase change material showed higher resistance to chloride ion penetration than the mixture only using acrylate and the OPC level was insufficient. From the results of physical and mechanical performances of semi-rigid pavement cement paste, the phase change material substitution rate of 20% was effective in the range of this study.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.1
• /
• pp.17-29
• /
• 2019

This study developed prediction models of chlorine bulk decay coefficient by each condition of water quality, measuring chlorine bulk decay coefficients of the water and water quality by water purification processes. The second-reaction order of chlorine were selected as the optimal reaction order of research area because the decay of chlorine was best represented. Chlorine bulk decay coefficients of the water in conventional processes, advanced processes before rechlorination was respectively $5.9072(mg/L)^{-1}d^{-1}$ and $3.3974(mg/L)^{-1}d^{-1}$, and $1.2522(mg/L)^{-1}d^{-1}$ and $1.1998(mg/L)^{-1}d^{-1}$ after rechlorination. As a result, the reduction of organic material concentration during the retention time has greatly changed the chlorine bulk decay coefficient. All the coefficients of determination were higher than 0.8 in the developed models of the chlorine bulk decay coefficient, considering the drawn chlorine bulk decay coefficient and several parameters of water quality and statistically significant. Thus, it was judged that models that could express the actual values, properly were developed. In the meantime, the chlorine bulk decay coefficient was in proportion to the initial residual chlorine concentration and the concentration of rechlorination; however, it may greatly vary depending on rechlorination. Thus, it is judged that it is necessary to set a plan for the management of residual chlorine concentration after experimentally assessing this change, utilizing the methodology proposed in this study in the actual fields. The prediction models in this study would simulate the reduction of residual chlorine concentration according to the conditions of the operation of water purification plants and the introduction of rechlorination facilities, more reasonably considering water purification process and the time of chlorination. In addition, utilizing the prediction models, the reduction of residual chlorine concentration in the supply areas can be predicted, and it is judged that this can be utilized in setting plans for the management of residual chlorine concentration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.134-145
• /
• 2021

It is common to optimize the propulsion control system through a so-called tuning process that modifies the parameter values of the propulsion control software during a ship commissioning. However, during this process, if the error of the initial setting value is large, the tuning time may take too long, or the propulsion equipment can be seriously damaged. Therefore, we conducted research on the design of a propulsion controller that applied a Processor lever controller even for inexperienced people with relatively little experience in tuning propulsion control software to be able to reduce the tuning time while protecting the propulsion system. Through simulation, by comparing the execution result of propulsion control lever commands through the PI controller without applying the Processor lever controller. We analyzed the improvement of the Overshoot and propulsion performance. The simulation results showed that the safety of the propulsion system increased because Overshoot of approximately 9.74%, which occurred when the Processor lever function was not applied.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.609-615
• /
• 2011

MgO concrete containing lightly burnt MgO powder at $850{\sim}1,000^{\circ}C$ may have a long-term expansibility characteristic. Such expansibility of MgO concrete can compensate the shrinkage at later ages since the hydration of the MgO is very slow. However, the addition of MgO delays the initial hydration of cement and increases the setting time of cement. Also, the porosity and pore-size distribution of the MgO concrete are different from OPC concrete. Therefore, in order to use MgO in practice, both mechanical and durability properties of MgO concrete should be carefully examined. In this study, durability tests on carbonation, freezing-thawing, and diffusion of chloride were carried out after 56 days of underwater curing at $20^{\circ}C$ to compare durability characteristics of 5% MgO-mixed concrete with those of OPC concrete. The results showed that MgO concrete shows a greater durability than the concrete with no MgO, because the micro structure in the MgO concrete is much denser due to its expansibility characteristic.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.105-112
• /
• 2005

Stabilizing and rousing sludge water generated from washing truck mixer and batcher plant can resolve inconsistency in quality and improve strength, therefore it is essential to review how to utilize it. This research conducted experiments and studied on solids of sludge water to find out the types of stabilizing agents available in conditions of producing ready mixed concretes in Korea. The result showed that oxy carboxylic acid retarder dedicated for stabilizing sludge water was most effective in decreasing solid. However, the setting time of cement paste was retarded due to surplus reactants, but it did not impede application of ready mixed concretes. When we left the sludge water mixed with stabilizing agent, it has been noted that initial retard effect recovered to the level using just service water in 7${\~}$8 days and that it is effective to use stabilized sludge water in 2${\~}$3 days. On the other hand, saccharic type super retarding agent was also outstanding in applicability by showing similar effect. The sludge water stabilizing agents currently marketed depend on imports, therefore it is necessary to locally manufacture usable stabilizing agents and to review its usability with multi-dimensional view.