• Journal of the Korean Professional Engineers Association
• /
• v.1 no.1
• /
• pp.18-25
• /
• 1968

Higher yield in rice paddies is greatly dependent on adequately balanced and timely supply of water. A majority of rice paddy in Korea is generally irrigated by rainfall, but in many cases it has to be supplemented by artificial irrigation for optimum rice culture. Although the water requirement of rice plant is for higher Than that of athec crops, submerged condition of rice paddy is not Necessarily required. The moisture requirement of rice plant varies with its growing stages, and it is possible to increase the irrigation efficiency through reduction of water loss due to percolation in rice paddies. An experimental plots were set up by means of sandomized block design with three duplication; (a) All time submerged, (b) Economically controlled, and (c) Extremely controlled. Three different irrigation periods Were (a) Initial sage, (b) Inter-stage, and (c) Yast stage. The topsoil of the three plots were excavated to the depth of 30 cm and then compacted with clay of 6 cm thickness. There after, they were piled up with the excavated top soils, leveled and cored with clay of 6 cm thickness around footpath in order to prevent leakage. The results obtained from the experiments are as follows, 1. There is no difference among the three experiments plots in terms of physical and chemical conditions, soil properties, and other characteristics. 2. Culm length and ear length are not affected by different irrigation methods. 3. There is no difference in the mature rate and 1, 000 grain weight of rice for the three plots. 4. The control plot which was irrigated every three days shows an increased yield over the all the time submerged plot by 17.8 percent. 5. The clay lined plot whose water holding capacity was held 5 days long, needs only to be irrigated every 7 days. 6. The clay lined plot shows an increased yield over the untreated plot ; over all-the-time submerged plot by 18 percent ; extremely controlled plot by 18 percent, and economically controlled plot by 33 percent. 7. It may be saved in water requirement about one Thirds.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.3
• /
• pp.138-146
• /
• 1989

This experiment was conducted to utilize the water soluble protein from the fish meal in wastewater as nitrogen source by alkaline protease producting bacteria and to investigate the culture condition of the production. G-12 and G-14 strains having the strong activity of the alkaline pretense were isolated from sea water. These strains were identified as Pseudomonas chlororaphis and Pseudomonas alcaligenes according to physiologycal characteristics, respectively. In enzyme production, galactose and casein for G-12 strain, and raffinose and the water soluble protein of the fish meal wastewater for G-14 strain was favorable as carbon and nitrogen source. An action of inhibition appeared in all of the metal salts used. The optimal temperature of enzyme production was $30^{\circ}C$ for all strains. Optimal initial pH for the enzyme formation in G-12 and G-14 strains was pH 10.0 and 8.0. When these two strains were incubated for $30\~35$ hours in the optimal production medium, the enzyme production reached at maximum.

• KSBB Journal
• /
• v.21 no.6 s.101
• /
• pp.451-455
• /
• 2006

An efficient pilot scale (10 ton) three-stage methane fermentation system to digest food waste has been developed in this laboratory. This system consisted of three stages: semianaerobic hydrolysis, anaerobic acidogenesis and strictly anaerobic methanogenesis. From the secondary acidogenesis reactor, a novel strain KA4 responsible for alcohol fermentation was isolated and characterized. The cell was oval and its dimension was $5.5-6.5{\times}3.5-4.5\;{\mu}m$. This strain was identified as Saccharomyces cerevisiae KA4 by 26S rDNA D1/D2 rDNA sequence. Optimal culture temperature was $30-35^{\circ}C$. Cells were tolerant to 5% (v/v) ethanol concentration, however, were inhibited significantly by higher ethanol concentration up to 7%. The strain could grow well up to 50% (w/v) initial glucose concentration in the YM liquid medium, however, optimal concentration for ethanol fermentation was 10%. It could produce ethanol in a broad initial pH range from 4 to 10, and optimal pH was 6. In this condition, the strain converted 10% glucose to 7.4% ethanol during 24 hr, and ethanol yield was estimated to be 2.87 moi EtOH/mol glucose.

• Journal of Life Science
• /
• v.28 no.8
• /
• pp.969-976
• /
• 2018

In this study, transglucosidase (TG), an enzyme produced by Aspergillus niger, synthesized isomaltooligosaccharide from ${\alpha}-(1{\rightarrow}4)$ linked substrates. The highest TG-producing A. niger KCTC6913 was selected from six kinds of species, and optimized TG producing conditions were established. Five different carbon sources (potato starch, sweet potato starch, corn starch, wheat starch, and dextrin) and three different nitrogen sources (yeast extract, malt extract, and beef extract) were tested to establish the carbon and nitrogen sources favorable for TG production. Measurements of TG activity after an initial culture at pH 5.0 for 15 days revealed that potato starch and yeast extract, which are basic culture media, resulted in the highest TG activity. In addition, A. niger KCTC6913 increased TG production under aerobic conditions and a controlled carbon/nitrogen ratio. In conclusion, to evaluate TG activity in the established optimal medium, it is confirmed that the basal and potato dextrose broth medium were used as a control, and the highest TG production was measured, which was highlighted in the established optimal medium.

• Applied Biological Chemistry
• /
• v.41 no.6
• /
• pp.465-470
• /
• 1998

For the need of bio-degradable flocculant in stage of wastewater treatment, some cultural conditions of bioflocculant production were optimized with Aeromonas hydrophila KH-54. About 260 strains of type culture and bacteria isolated from marsh, pond, activated sludge, etc were examined for their ability to flocculate kaolin particles and swine wastewater. Among them, KH-54 showed the highest flocculating activity and was identified as Aeromonas hydrophila according to the cultural, morphological and physiological properties. The maximum production of the flocculant secreted by Aeromonas hydrophila KH-54 was observed in culture medium containing 2.0% mannitol, 0.05% ammonium chloride, 0.02% potassium phosphate dibasic, 0.01% $MgSO_4{\cdot}7H_2O$ and 0.05% yeast extract at initial pH 7.0 when cultured on rotary shaker controlled at $25^{\circ}C$ and 150 rpm. Under the optimized condition, the flocculating ability reached to 770 units/ml of kaolin flocculating activity and 81% of NTU removal efficiency against swine wastewater after 4 days cultivation. The bioflocculant was also effective on various organic wastewaters other than swine wastewater, showing NTU removal rate ranging from 92% to 34%.

• Korean Journal of Microbiology
• /
• v.48 no.4
• /
• pp.298-304
• /
• 2012

Among 63 Bacillus strains grown at $60^{\circ}C$ from sixteen samples of homemade Korean soybean paste, one strain was selected for producing the thermostable protease. The isolate has been identified as Bacillus licheniformis on the basis of its 16S rDNA sequence, morphology and biochemical properties. Culture filtrate of the isolate showed maximal protease activity at the reaction condition of $60-65^{\circ}C$ and pH 11. The culture filtrate retained more than 87% of initial protease activity after incubation for 30 min at $60^{\circ}C$ without substrate. In order to develop the medium composition, effects of ingredients including nitrogen sources, carbon sources, metal ions and phosphate were examined for protease production of the isolate. Lactose and soytone peptone were the most effective carbon and nitrogen source for the enzyme production. After the late logarithmic growth phase the isolate began to produce the protease, and the maximum protease productivity was reached to 550 unit/ml in the optimized medium consisting of lactose (3%), soytone peptone (1.5%), $MgSO_4$ (0.1%), $K_2HPO_4$ (0.03%), and $KH_2PO_4$ (0.03%) at 28 h of incubation.

• Journal of Life Science
• /
• v.23 no.8
• /
• pp.1010-1018
• /
• 2013

The greenhouse whitefly, Bemisia tabaci, is considered one of the most destructive pests of crops. In this study, we aimed to determine the optimal liquid culture conditions in shake flasks for maximal sporulation of Beauveria bassiana M130 using rice bran. The optimal initial pH for the spore production of B. bassiana using extracted rice bran medium was 5.2 and $28^{\circ}C$. The screening in shake flasks of carbon and nitrogen sources resulted in the identification of an optimal medium based on 0.5% $(NH_4)_2SO_4$, with extracted rice bran 8:1. Using this medium, a production level of $2.15{\times}10^9$ spores per ml was obtained after six days from culture inoculation at $28^{\circ}C$ in a rotary shaking incubator at 130 rpm. In addition, the specific activities of extracellular enzymes of chitinase and protease were $4,296{\mu}mol$ and $375{\mu}mol$, respectively. These results suggest that Beauveria bassiana M130 could be a bio-controller for the greenhouse whitefly.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.405-410
• /
• 2021

In this study, a finite element analysis was performed applying a nonlinear material model and fatigue load conditions to evaluate the service life and spring stiffness of the resilient pad for rail fastening system. As a result of the fatigue analysis, the rate of change in spring stiffness compared to the initial condition was about 16%, indicating that fatigue hardening occurred. As for the stress generated in the longitudinal direction of the resilient pad, the difference between the stress generated at the center and the edge was about 10 times or more. In addition, it was analyzed that the equivalent stress of the outer boundary was more than twice as large as that of the central part. Therefore, it was analyzed that the damage and deformation of the resilient pad are the corners of the resilient pad under actual service conditions. The fatigue life diagram of the resilient pad (S-N curve) was derived using the equivalent stress of the resilient pad according to the fatigue cycles. Using the fatigue life diagram of the resilient pad derived in this study, it is considered that it can be used to predict the fatigue life under the relevant conditions by calculating the equivalent stress of the resilient pad under various load conditions.

• Journal of the Korean Society of Tobacco Science
• /
• v.2 no.2
• /
• pp.20-37
• /
• 1980

Among the 34 strains of Nicotinophiles selected in the previous experiments, strain NCT27 identified with Pseudomonas putida and strain NCT30 identified with Arthrobacter oxydans biotype nan thus were Investigated for optimization of growth conditions for nicotine degradation and other cultural characteristics. The compositions of optimized medium were to be following: $KH_2PO_4$ 2.Ogr, KCI 5.Ogr, $MgSO_4$.$7H_2O$ 20mg, $MnSO_4$.$6H_2O$ 0.2mg, $FeSO_4$.$7H_2O$ 1.Omg, Col$^{++}$ (Cobalt Acetate),2.O$\gamma$, N1$^{++}$ (NiSO4,6H2O) 0.5$\gamma$, and yeast extract 80mg per liter. The optimum initial concentrations of nicotine for growth were 0.4% for Pseudomonas and 0.1% for Arthrobacter, respectively. The optimum temperature and pH were 3$0^{\circ}C$ and 7.0 for both of strains. The pH of culture medium of Pseudomonas was changed from acidic condition to basic one in going from the logarithmic growth phase to the stationary growth phase. In contrast with Pseudomonas, it remained constant in case of Arthrobacter. The growth of Arthrobacter was completely inhibited in the nicotine concentration of 0.7&. However, Pseudomonas could grow even in the nicotine concentration of 1.0%. Moreover, it could grow successfully in the tobacco extract media as well as media containing carbon and nitrogen sources other than nicotine. The maximum rates of nicotine degradation were to be 1.22 gr./hr./liter for Pseudomonas and 0.186 gr./hr./liter for Arthrobacter, respectively.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.40-45
• /
• 2006

The baculovirus-insect Drosophila melanogaster S2 cell system combines advantages of conventional baculovirus system and non-lytic S2 cell system because baculoviruses can infect non-permissive cells such as mammalian and Drosophila S2 cells but cannot replicate themselves inside the cells. In the present work, we investigated effects of infection conditions on production of green fluorescent protein (GFP) as a target protein using this baculovirus-S2 cell system. Even though higher MOI and longer baculovirus contact time showed better GFP expression yield during the shorter period, overall protein yield could be lower during the longer period due to the relatively higher cell detachment and lysis (lower cell viability). In addition, maintaining high MOI will be not practical for large-scale cell culture. Therefore, instead of maintaining high MOI, we found that high initial cell number and concentrated (10X) baculovirus volume can confer comparable protein expression even under the moderate MOI condition. Also, we found that the post-infection time that is connected to state of cells after infection was an important factor for production yield.