• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.127-130
• /
• 1990

The fuzzy logic controller which can be applied to various industrial processes is quite often dependent on the heuristics of the experienced operator. The operator's knowledge is often uncertain. Therefore an incorrect control rule on the basis of the operator's information is a cause of bad performance of the system. This paper proposes a new self-learning fuzzy control method by the fuzzy system identification using the data pairs of input and output and arbitrary initial relation matrix. The position control of a DC servo motor model is simulated to verify the effectiveness of the proposed algorithm.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.11
• /
• pp.1163-1173
• /
• 1990

In the stability analysis of a synchronous motor, the considerations of the initial conditions, that is, field application points and the determination techniques of stability regions to assure stable operations over four quadrants are very important. In this paper, Lyapunov stability regions obtained from a newly proposed algorithm with Lyapunov function of simple type on the basis of numerical analysis method are shown to be true stability regions which can accurately pull in within 2 (rad) after field application.

• Journal of Plant Biology
• /
• v.26 no.3
• /
• pp.151-160
• /
• 1983

Structuer, ontogeny, classification and taxonomic significance of trichomes have been studied in 39 genera and 125 species of the selected families in Malvales. They were studied on both vegetative and floral organs. There are nine types of eglandular and eight of glandular trichomes. The trichomes were classified on the basis of their form, structure and contents. All of them originated from a single papillate hair initial. According to the trichome data, the Malvales was comfirmed as a natural order with 5 homogenous families: Malvaceae, Bombacaceae, Sterculiaceae, Tiliaceae, and Elaeocarpaceae.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.275-282
• /
• 2001

In this paper, nonlinear analyses of RC (Reinforced Concrete) columns are conducted, and an improved criterion to estimate the design load carrying capacity of slender RC columns is proposed. To simulate the material nonlinearty including the cracking of concrete, the layer model is adopted, and the initial stress matrix is considered for the simulation of P- effect. After correlation studies with previous numerical results to verify the efficiency of the developed numerical model, many parameter studies are followed, and a regression formula which can give more exact resisting capacity of slender RC columns is introduced on the basis of the obtained numerical results.

• Solar Energy
• /
• v.7 no.2
• /
• pp.65-73
• /
• 1987

Microstructural basis for the thermal degradation of electrodeposited black chrome "solar-L-foil" heated in air has been investigated using scanning electron microscopy, energy dispersive x-ray analysis, X-ray diffraction techniques and UV-VIS-NIR spectre-photometer. Experimental result, the change in the shape of the particle comprising the film from their initial needle like structure to a more spherical shape with an oxide after 1hr annealing at $600^{\circ}C$ has been observed. The effect is to degrade solar absorptance of the thin film.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.857-860
• /
• 2006

In the present study, the method and procedure for analysis of impact damage behavior for concrete under penetration and perforation of projectile is investigated. Conservation law, equation of motion, initial and boundary conditions, and FEM formulation are introduced and derived respectively. Specially, the constitutive equation which rate-dependent damage combined with rate-dependent plasticity within the appropriate framework of theory of thermodynamics is examined. This paper aimed at the review with respect to impact damage models for concrete to develop that model. This paper is a basis research for the development of impact damage model for concrete.

• Kyungpook Mathematical Journal
• /
• v.61 no.2
• /
• pp.383-393
• /
• 2021

In this paper, numerical techniques are presented for solving initial value problems of fractional differential equations with variable coefficients. The method is derived by applying a Taylor vector approximation. Moreover, the operational matrix of fractional integration of a Taylor vector is provided in order to transform the continuous equations into a system of algebraic equations. Furthermore, numerical examples demonstrate that this method is applicable and accurate.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.3
• /
• pp.240-253
• /
• 2017

Latin hypercube sampling is widely used design-of-experiment technique to select design points for simulation which are then used to construct a surrogate model. The exploration/exploitation properties of surrogate models depend on the size and distribution of design points in the chosen design space. The present study aimed at evaluating the performance characteristics of various surrogate models depending on the Latin hypercube sampling (LHS) procedure (sample size and spatial distribution) for a diverse set of optimization problems. The analysis was carried out for two types of problems: (1) thermal-fluid design problems (optimizations of convergent-divergent micromixer coupled with pulsatile flow and boot-shaped ribs), and (2) analytical test functions (six-hump camel back, Branin-Hoo, Hartman 3, and Hartman 6 functions). The three surrogate models, namely, response surface approximation, Kriging, and radial basis neural networks were tested. The important findings are illustrated using Box-plots. The surrogate models were analyzed in terms of global exploration (accuracy over the domain space) and local exploitation (ease of finding the global optimum point). Radial basis neural networks showed the best overall performance in global exploration characteristics as well as tendency to find the approximate optimal solution for the majority of tested problems. To build a surrogate model, it is recommended to use an initial sample size equal to 15 times the number of design variables. The study will provide useful guidelines on the effect of initial sample size and distribution on surrogate construction and subsequent optimization using LHS sampling plan.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.1003-1010
• /
• 2005

A study consisting of 3 trials was designed to assess the relative biological efficacy of DL-methionine (DL-Met) in comparison to liquid methionine hydroxy analogue (MHA-FA) in growing pigs. In trial I a basal diet was supplemented with three graded levels of DL-methionine (0.25, 0.50 and 0.75 g/kg) or liquid MHA-FA (0.0285, 0.0570 and 0.0855 g/kg) on equimolar basis. The basal diet contained 18.3% CP, 0.22% Met and 0.51% Met+Cys, which is below the methionine requirement for weaned pigs between 10 and 20 kg BW according to NRC (1998) but adequate in all other essential nutrients and energy. Using an exponential model, the efficacy of the two methionine sources was estimated from nitrogen retention data obtained in 42 piglets with an initial BW between 11.0 kg (Exp. 1) and 11.7 kg (Exp. 2). In trials II and III, with a total of 192 and 96 pigs, and with an initial BW of 10.6 and 21 kg, respectively, growth response criteria were assessed to determine if in agreement with previous studies in pigs and poultry a biological effectiveness of about 65% on average could be confirmed for liquid MHA-FA in comparison to DL-met. Based on N-retention (trial I) the biological efficacy of liquid MHA-FA on a weight-to-weight basis was calculated to be 62% relative to DL-met. Basically, these results were confirmed using growth response criteria as measures; the results of trial II and III revealed no significant differences in growth performance and feed conversion between treatments indicating that 100 parts of liquid MHA-FA can be replaced by 65 parts of DL-met.

• Advanced Composite Materials
• /
• v.17 no.1
• /
• pp.57-73
• /
• 2008

The present paper focuses on experimental verification of the ply-by-ply basis inelastic analysis of multidirectional laminates. First of all, rate dependence of the tensile behavior of balanced symmetric cross-ply T800H/epoxy laminates with a $[0/90]_{3S}$ lay-up under off-axis loading conditions at $100^{\circ}C$ is examined. Uniaxial tension tests are performed on plain coupon specimens with various fiber orientations $[{\theta}/(90-{\theta})]_{3S}$ ($\theta$ = 0, 5, 15, 45 and $90^{\circ}C$) at two different strain rates (1.0 and 0.01%/min). The off-axis stress.strain curves exhibit marked nonlinearity for all the off-axis fiber orientations except for the on-axis fiber orientations $\theta$ = 0 and $90^{\circ}$, regardless of the strain rates. Strain rate has significant influences not only on the off-axis flow stress in the regime of nonlinear response but also on the apparent off-axis elastic modulus in the regime of initial linear response. A macromechanical constitutive model based on a ply viscoplasticity model and the classical laminated plate theory is applied to predictions of the rate-dependent off-axis nonlinear behavior of the cross-ply CFRP laminate. The material constants involved by the ply viscoplasticity model are identified on the basis of the experimental results on the unidirectional laminate of the same carbon/epoxy system. It is demonstrated that good agreements between the predicted and observed results are obtained by taking account of the fiber rotation induced by deformation as well as the rate dependence of the initial Young's moduli.