• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1803-1808
• /
• 2010

Electric railway system consists of rolling stock, track, signal and catenary system. ATP system in railway signaling system is the important one grasping the position and velocity of a train. The wayside device of ATP system is installed between rails. Recently, the research about increasing train speed has been developed in total departments of the railroad systems. The study on the information transmission between on-board device and wayside device is required for increasing the train speed in the ATP system. When the train speed is increased as to same transmission distance, the problem on information transmission occurs because the transmission time is decreased. In case that the transmission distance is extended, the transmission time is decreased with respect to the train speed. Therefore, we have to define the standard magnetic field intensity as to the train speed in order to transmit correctly telegram. In this paper, the transmission distance for the telegram is suggested on the basis of the train speed. Also, the standard magnetic field intensity from the wayside device to on-board device is proposed by using transmission distance regarding the train speed in the ERTMS/ETCS system by using Matlab program. Also, BER according to the train speed is presented by calculating electric field intensity from the magnetic field intensity.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.10
• /
• pp.502-509
• /
• 2002

In the analysis of lightning surges, transmission towers are usually simulated by ATPDraw. The modeling of transmission towers is an essential part of the traveling wave analysis of lightning surges in transmission lines. The tower model is applied to the 154kV transmission tower of which surge performance characteristics are measured Tower surge response is computed using nonuniform, single-phase line models for both transmission tower and ground wire. The overvoltage will effect to the underground transmission line. The underground cable is combined by duct and trefoil type, and the each arrester is placed on the leading-in tube and outgoing tube. This paper analyzed the effect of lightning overvoltage on the underground cable system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.461-463
• /
• 2018

In this paper, we have studied the devices needed for long distance wireless transmission of SDH network. This devices propose wireless transmission and measurement method of STM-1(basic transmission unit of SDH method) signal and 200Mbps synchronous ethernet. The synchronous clock recovery function is provided for STM-N transmission and synchronous ethernet transmission, and spare clock switching function is designed for stable synchronization. In addition, we discussed the measurement method of STM-N and synchronous Etherent communication method in wireless transmission section.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.1
• /
• pp.79-84
• /
• 2005

In many countries, the electric power industry is undergoing significant changes known as deregulation and restructuring. These alterations introduce competition in generation and retail and require open access to the transmission network. The competition of the electric power industry causes many issues to surface. Among them, unbundling of the transmission service is probably the most complicated as it is a single and integrated sector and the transmission revenue requirement must be allocated to market participants in a fair way. In these situations, it is valuable to research the methodologies to allocate transmission usage. The power tracing method offers useful information such as which generators supply a particular load or how much each generator (load) uses a particular transmission line. With this information, we can allocate required transmission revenue to market participants. Recently, several algorithms were proposed for tracing power flow but there is no dominant power tracing method. This paper proposes a power tracing method based on graph theory and complex-current distribution. For practicability, the proposed method for transmission usage allocation is applied to IEEE 30 buses and compared with the method proposed by Felix F.Wu.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5855-5877
• /
• 2017

In view of personal health and disease management based on cost effective healthcare services, there is a growing need for real-time monitoring services. The electrocardiogram (ECG) signal is one of the most important of health information and real-time monitoring of the ECG can provide an efficient way to cope with emergency situations, as well as assist in everyday health care. In this system, it is essential to continuously collect and transmit large amount of ECG data within a given time and provide maximum user convenience at the same time. When considering limited wireless capacity and unstable channel conditions, appropriate signal processing and transmission techniques such as compression are required. However, ISO/IEEE 11073 standards for interoperability between personal health devices cannot properly support compressed data transmission. Therefore, in the present study, the problems for handling compressed data are specified and new extended agent and manager are proposed to address the problems while maintaining compatibility with existing devices. Extended devices have two PM-stores enabling compression and a novel transmission scheme. A variety of compression techniques can be applied; in this paper, discrete cosine transformation (DCT) is used. And the priority of information after DCT compression enables new transmission techniques for performance improvement. The performance of the compressed signal and the original uncompressed signal transmitted over the noisy channel are compared in terms of percent root mean square difference (PRD) using our simulation results. Our transmission scheme shows a better performance and complies with 11073 standards.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.4
• /
• pp.1-11
• /
• 1991

Since it is very important for an ocean-going vessel to transmit information quickly and accurately to her owner or charterer not only for the ship's safety but for economic operation of the ship, some newly-built automated vessels equipped with automatic information transmission system which consists of INMARSAT-C and specially-designed computer. This system, however, is not applicable to the existing vessel without chaging her equipments and, furthermore, is too expensive for small shipping companies to fit out such a system on their vessels. Therefore, we propose a low-priced information transmission system which consists of a personal computer and communication equipments in the existing vessel, and in this paper, as the groundwork of the proposed system, we have made up the ship's position transmission system which is composed of and IBM AT-compatible, PC, INMARSAT-A and a GPS receiver. As the test result of the system through sea trial on the training ship 'HANBADA', we confirmed that transmission of the ship's position was achieved succesfully and consequently there could be high possibility of cost-effectiveness of the proposed system.

• Journal of Information Processing Systems
• /
• v.7 no.3
• /
• pp.531-542
• /
• 2011

In this paper, we propose a new congestion control scheme for high-speed networks. The basic idea of our proposed scheme is to adopt a game theory called, "Minority Game" (MG), to realize a selective reduction of the transmission speed of senders. More concretely, upon detecting any congestion, the scheme starts a game among all senders who are participating in the communication. The losers of the game reduce the transmission speed by a multiplicative factor. MG is a game that has recently attracted considerable attention, and it is known to have a remarkable property so that the number of winners converges to a half the number of players in spite of the selfish behavior of the players to increase its own profit. By using this property of MG, we can realize a fair reduction of the transmission speed, which is more efficient than the previous schemes in which all senders uniformly reduce their transmission speed. The effect of the proposed scheme is evaluated by simulation. The result of simulations indicates that the proposed scheme certainly realizes a selective reduction of the transmission speed. It is sufficiently fair compared to other simple randomized schemes and is sufficiently efficient compared to other conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.856-867
• /
• 2006

This paper proposes a new algorithm for opportunistic scheduling that take advantage of both multiuser diversity and power control. Motivated by the multicast RTS and priority-based CTS mechanism of OSMA protocol, we propose an opportunistic packet scheduling with power control scheme based on IEEE 802.11 MAC protocol. The scheduling scheme chooses the best candidate receiver for transmission by considering the SINR at the nodes. This mechanism ensures that the transmission would be successful. The power control algorithm on the other hand, helps reduce interference between links and could maximize spatial reuse of the bandwidth. We then formulate a convex optimization problem for minimizing power consumption and maximizing net utility of the system. We showed that if a transmission power vector satisfying the maximum transmission power and SINR constraints of all nodes exist, then there exists an optimal solution that minimizes overall transmission power and maximizes utility of the system.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.155-162
• /
• 1999

Various applications of video conferencing are required real-time transmission in order to offer service of best effort in internet. Because the bandwidth of internet changes dynamically, appropriated QoS could not be guaranteed To resolve the problem. available bandwidth between sender and receiver is measured. And according to measured bandwidth, the transmission of multimedia data is controlled In this paper, we propose algorithm of efficient transmission for best QoS in internet According to a present status of network, we measure available bandwidth using feedback RTCP information and change a compression rate to reduce a producing CODEC data. And according to the priority that is measured by packet loss for received RTCP information, we abandon frames indicated as lower weight in transmission buffer of sender.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1777-1782
• /
• 2004

I propose a prescription transmission system based on XML in this paper, and it is not to attach a former signature to only a XML document for encoding of XML/EDI, and it is construction, one with the prescription transmission system which is safer with what use a way to attach a digital signature to DTD. I defined sub element to manage information prescription DTD defined prescription information, patient information, medical care organ information, prescription details information, compounding of medicines details information element according to for each a component of a prescription I went along, and to have looked up, and to have obeyed information transmission at he low rank. I read a DTD file for safe prescription transmission, and I do element or property, the entity which I do it, and is extracted here, and Pasing is saved in a table while being a field. If Pasing is finished, I read and lift a hash table and carry out message a digest. I compose it with an early private key and create a digital signature.