This study defines influencing sections as the part of the road section where passing vehicles are traveling with the lower speed compared to speed limit due to speed humps. The influencing section was divided into 3 parts; influencing section before the speed hump, interval section, and influencing section after the speed hump. This analysis focused on the changes of each part depending on installation types, vehicle types, and daytime or nighttime. For the interval section, especially, the ratio of distance traveled with lower speed than speed limit to interval section is defined as effective influencing section ratio to be analyzed. Vehicle speed profiles were collected with a speed gun to extract influencing section lengths. The survival analysis was applied and estimated survival functions are compared with each other by several statistical tests. As a consequence, the average length of influencing section on the 50m sequential speed humps was 75.3% longer during the deceleration than that of isolated speed hump, and 18.9% during the acceleration. The effective influencing section ratio for the 30m and 50m sequential speed humps had a small difference of 81.0% and 76.0% while the absolute values of the section that passing speed were less than the speed limit were longer on 50m sequential speed humps, each being 24.3m and 38.0m. Using the log rank test, it was evident that sequential speed humps were more effective to increase the length of influencing sections compared to the isolated speed hump. Vehicle type was the strong factor for influencing section length on the isolated speed hump, but daytime or nighttime was not the effective one. This research result can be used for improving the efficiency selecting the installation point of speed humps for road safety and estimating the standard of the distance between sequential speed humps.
Recently, Cesarean Section has been revealed as major events in maternity nursing, because it has influence on tile formatter of the self concept of cesarean section mothers as well as later coping mechanism and mother-child relationship including the mothering role. The study is conducted to clarify the relationships between the perceired family support and the self concept of cesarean section mothers, and to find out other Influencing factors on the formation of the self concept. Measuring instrument used in this study was Lee's scale to measure the self concept and the degree of perceived family support of the cesarean section mothers, The subject were 155 cesarean section mothers who were selected conveniently. Volunteers answered self reporting questionnaires which asked about their self concept. Data was analyzed as follows using SAS. The relationship between scores of the self concept and degree of the perceived family support was analyzed by Pearson's product moment correlation. In order to identify the influencing effects of demographic variables on the formation of self concept & F test were used. Result were summarized as follows : 1. Scores of self concept of cesarean section mothers were significantly correlated with scores of the perceived family support (r=0.3438, p<0.01) These results show that the family support is closely related to the self concept of cesarean mothers and has positive effects on their coping capacity. 2. Scores of self-concept of those who have lower ducation background and are multipara were significantly higher than those who have higher education background and are primipara(M=29.90$\pm$9.37, 27.69$\pm$3.89, t=2.006, df=105.8, p=0.0480: M=27.75$\pm$3.49. 29.46$\pm$8.68, t=-1.7183, 2. p=0.08).
We have investigated the luster of modified cross-sectional fiber fabrics as one of the essential quality estimates for clothing development. We have confirmed an objective evaluation method, and have determined the experimental luster characteristics of modified cross-section fibers. The cross-section of the fibers in a fabric affects the appearance of a textile. We used the image analysis method to investigate the luster to determine the critical factors influencing the appearance of modified cross-section fiber fabrics. For similarly structured textiles in a component fabric, clear differences were observed in the fabric weave, density, percentage, and total area of blobs, which is image region. Color played a decisive role in the luster of the textiles, and luster was not significantly influenced by the modified cross-section fabric weave. In addition, the degree of luster did not increase in the order plain to twill to satin for modified cross-sectional fiber fabrics. All the split-type microfibers exhibited higher numerical luster values (percentage of pixels, and number and total area of blobs) than sea-island microfibers did. The degree of luster of the modified cross-sectional fiber fabrics was not high at specular reflection angles.
Boules, Philopateer F.;Mehanny, Sameh S.F.;Bakhoum, Mourad M.
Structural Engineering and Mechanics
/
v.68
no.1
/
pp.67-80
/
2018
Recently, U-section decks have been more and more used in metro and light rail bridges as an innovative concept in bridge deck design and a successful alternative to conventional box girders because of their potential advantages. U-section may be viewed as a single vent box girder eliminating the top slab connecting the webs, with the moving vehicles travelling on the lower deck. U-section bridges thus solve many problems like limited vertical clearance underneath the bridge lowest point, besides providing built-in noise barriers. Beam theory in mechanics assumes that plane section remains plane after bending, but it was found that shearing forces produce shear deformations and the plane section does not remain plane. This phenomenon leads to distortion of the cross section. For a box or a U section, this distortion makes the central part of the slab lagging behind those parts closer to the webs and this is known as shear lag effect. A sample real-world double-track U-section metro bridge is modelled in this paper using a commercial finite element analysis program and is analysed under various loading conditions and for different geometric variations. The three-dimensional finite element analysis is used to demonstrate variations in the transverse bending moments in the deck as well as variations in the longitudinal normal stresses induced in the cross section along the U-girder's span thus capturing warping and shear lag effects which are then compared to the stresses calculated using conventional beam theory. This comparison is performed not only to locate the distortion, warping and shear lag effects typically induced in U-section bridges but also to assess the main parameters influencing them the most.
The purpose of this study is to estimate cesarean section rate in Korea and analyze characteristics of health care institution which affect regional variation in the rate. We have searched vaginal and cesarean section deliveries among Diagnosis Related Group dat based upon insurance claim bills which have been submitted to Korean Insurance Corporation for two years since March, 1985. The results are as follows: 1. Out of all delivery cases of 87,500, cesarean section rate was 16.3% (14,299 cases). 2. Cesarean section rate varied according to size and ownership of health care institutions. In above 6- bed sized hospitals, the rate was at about 20% higher than small sized institutions, but rather in hospitals that have more than 500 beds, it was somewhat low. Classified by the hospital ownership, the rate was low at 18.4% in hospitals of religious organization and highest at private or corporate hospitals. 3. This study shows large regional variation in cesarean section rate; there are two times differences between region with the highest and lowest rate. Strongly related factors in that variation was the ownership of health care institution and urbanization variables. Low level of cesarean section rate in a region is explained by high proportion of delivery cases at institutions of religious organization and at insitutions in county level site. This result shows that apart from medical conditions of patients, indications of cesarean section differs from health care providers, and especially ownership of institution strongly affect them. Cesarean section rate in Korea is supposed to be at high level and development of utilization review programs to keep appropriate cesarean section rate is needed.
Opisthorchis viverrini (OV) liver flukes are common parasites found in central and southern Laos and constitute a major public health problem in the country. Laos people continue to have the habit of extensively consuming raw or half-cooked fish which are intermediate hosts. This study aimed to determine the prevalence and factors associated with OV infection in the population of Thakek district, Khammouane Province. This cross-sectional analytic study covered 237 subjects who filled out structured questionnaires. Fecal examination for OV infection was performed by Kato's thick smear method. Data analysis was carried out using STATA Version 10.0. Multiple logistic regression was applied. The results showed that the infection rate of OV was 54.8%. Factors associated with OV infections were gender, a habit of defecation in fields and raw fish (goi bplaa dip) consumption. Opisthorchiasis and associated cholangiocarcinoma development thus appear to remain as important concerns in Laos.
Journal of The Geomorphological Association of Korea
/
v.27
no.3
/
pp.41-51
/
2020
This study tried to reveal incision rate distribution of streams on the northern part of the Sobaek Mountain Range with OSL age dating and geomorphic analysis, and factors influencing on the distribution were also discussed. With results from the previous studies, a total of 10 sites from 7 streams in the study area showed the rates ranging from 0.220 m/ka to 0.297 m/ka. Namhan-gang and Geum-cheon indicated the highest and lowest rates, respectively. Both sides in the northern section in the study area showed similar rates, while the western side in the middle section and the eastern side in the southern section showed higher rates than the other sides. Higher rates were also found from the eastern and northern sides where the Range runs N-S and E-W directions, respectively. Certain relationships with altitude and distance from the divide can be recognized from the rates and may be attributed to active incision with altitude and location of the uplift axis near the present divide. The rates on granite and sedimentary rock were higher than those on metamorphic rock, indicating that bedrock type is one of the important factors influencing on stream incision. Tectonic movement seemed to play some roles in the rates, because areas with lineaments showed lower rates. This study suggests that incision rate distribution of streams on the northern part of the Sobaek Mountain Range reflects various local geomorphic and geologic conditions.
This study is to get the proper evaluation of the residual property of reinforced concrete beam exposed to fire. This study focused on the strength resistance and analytical evaluation of RC members exposed high temperature. And this study is the basis analytical research to conduct the other studies. To analysis by the finite element method, the Total-RC program was used to analysis it and the Total-Temp program was also used to analysis the temperature distributions at the section. All of results were compared with the pre-existing experimental data of simple supported beam. Using it, the parameters influencing the structural capacity of the high temperature-damaged RC members and residual strength estimation are investigated. The temperature distribution and the structural capacity at the section are calculated in this step. An application of this method is compared with the heating test result and residual property test for simple supported beam which is subjected to ISO 834 test fire. The results of this study are as follows; 1) The loads-displacement relationship of RC beam, considering initial thermal stress of cross section and heat transfer analysis are estimated comparing analytical value with pre-existing experimental results. 2) by the heating time (0, 1, 2 hours), the results of analysis with parameters show that the load capacity exposing at fire is affected.
Lovreglio, Piero;Leso, Veruscka;Riccardi, Elisabetta;Stufano, Angela;Pacella, Daniela;Cagnazzo, Francesco;Ercolano, Maria Luigia;Iavicoli, Ivo
Safety and Health at Work
/
v.13
no.1
/
pp.66-72
/
2022
Background: The aim of the present study was to evaluate the psychological well-being (PWB) during the coronavirus disease (COVID-19) pandemic in workers of a multinational company. Methods: Employees (aged ≥18 years) were recruited from Latin American, North American, New Zealand, and European sites of a multinational company operative during all the pandemic period. The self-reported Psychological General Well-Being Index was used to assess the global PWB and the effects on six subdomains: anxiety, depressed mood, positive well-being, self-control, general health, and vitality. The influencing role of age, gender, geographical location, COVID-19 epidemiology, and restrictive measures adopted to control the pandemic was explored. Results: A total of 1335 workers completed the survey. The aggregate median PWB global score was in a positive range, with significantly better outcomes detected in the Mexican and Colombian Latin American sites compared with the other worldwide countries (p < 0.001). Among the European locations, a significantly higher PWB score was determined in Spain compared with the German and French sites (p < 0.05). Comparable geographical trends were demonstrated for all the PWB subdomains. Male workers had a significantly better PWB compared with females (p < 0.05), whereas a negative correlation emerged with aging (p = 0.01). COVID-19 epidemiology and pandemic control measures had no clear effects on PWB. Conclusion: Monitoring PWB and the impact of individual and pandemic-related variables may be helpful to clarify the mental health effects of pandemic, define targeted psychological-supporting measures, also in the workplace, to face such a complex situation in a more constructive way.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.