• 한국환경과학회지
• /
• 제9권3호
• /
• pp.229-239
• /
• 2000

Spring, ground and thermal waters in the vicinity of Mt. Geumjeong and Mt. Baekyang area have been sampled and analyzed for major and minor elements. According to the Piper diagram, spring water belongs to $Ca-HCO_3$ and $Na-HCO_3$ types, groundwater to $Ca-HCO_3$ type, and thermal water to Na-Cl type. Based on the phase stability diagrams of $[Ca^{2+}]/{[H^+]}^2, [Mg^{2+}]/{[H^+]}^2, [K^+]/[H^+]$, and $[Na^+]/[H^+] vs. [H_4SiO_4]$, spring water, groundwater and thermal water are mostly in equilibrium with kaolinite. The result of factor analysis shows three factors (factor 1, 2 and factor 3) for the spring water, the groundwater and the thermal water which are represented by the influence of the dissolution of feldspar, calcite, anthropogenic sources (domestic and industrial wastes) and salt water.

• 한국초등과학교육학회지:초등과학교육
• /
• 제18권2호
• /
• pp.103-117
• /
• 1999

The importance of pedagogical content knowledge(PCK) has been recognized in learning science teaching. PCK is based partly on the essence of subject matter knowledges. Therefore, the effective teaching of science content knowledges is fundamental in preservice education of student teachers. But, particularly the science curriculum of primary teachers' colleges is composed of less lessons than needed. This research was executed to identify the content and context of earth science which were contained in questions by student teachers These questions which were written by the students about the earth science content in elementary science texts and teachers' guide books were collected and analyzed. Frequency and context concentration of questions about the themes of contents were obtained. In each unit of the text books, scatter diagrams of question frequency and context concentration of themes showed various features. The main results were as follows. first, in case of the units which contents ate composed of themes expected to be experienced in everyday life, the question frequency and context concentration showed positive correlation between them. But, other units, which everyday life experiences are not expected to influence, did not show distinct correlation.

• Structural Engineering and Mechanics
• /
• 제33권6호
• /
• pp.675-696
• /
• 2009

In this paper, a unified solution method is presented for the classical beam theory. In Strength of Materials approach, the geometry, material properties and load system are known and related with the unknowns of forces, moments, slopes and deformations by applying a classical differential analysis in addition to equilibrium, constitutive, and kinematic laws. All these relations are expressed in a unified formulation for the classical beam theory. In the special case of simple beams, a system of four linear ordinary differential equations of first order represents the general mechanical behaviour of a straight beam. These equations are solved using the numerical differential quadrature method (DQM). The application of DQM has the advantages of mathematical consistency and conceptual simplicity. The numerical procedure is simple and gives clear understanding. This systematic way of obtaining influence line, bending moment, shear force diagrams and deformed shape for the beams with geometric and load discontinuities has been discussed in this paper. Buckling loads and natural frequencies of any beam prismatic or non-prismatic with any type of support conditions can be evaluated with ease.

• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.691-702
• /
• 2017

Clearances are essential for the assemblage of mechanisms to allow the relative motion between the joined bodies. This clearance exists due to machining tolerances, wear, material deformations, and imperfections, and it can worsen the mechanism performance when the precision and smoothly-working are intended. Energy is a subject which is less paid attention in the area of clearance. The effect of the clearance on the energy of a flexible slider-crank mechanism is investigated in this paper. A clearance exists in the joint between the slider and the coupler. The contact force model is based on the Lankarani and Nikravesh model and the friction force is calculated using the modified Coulomb's friction law. The hysteresis damping which has been included in the contact force model dissipates energy in clearance joints. The other source for the energy loss is the friction between the journal and the bearing. Initial configuration and crank angular velocity are changed to see their effects on the energy of the system. Energy diagrams are plotted for different coefficients of friction to see its influence. Finally, considering the coupler as a flexible body, the effect of flexibility on the energy of the system is investigated.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.361-369
• /
• 2010

A study on the corrosion inhibition of metals is important in many industrial applications (carbon steel, copper, aluminum, SUS 304, nickel). In this study, we investigated the C-V diagrams related to the surface corrosion of metals. It was observed through the SEM that the surface corrosion state of the various metals had the corrosion potential by the scan rate and the organic inhibitor containing an amine group. We determined to measure cyclic voltammetry using the three-electrode system. The measurement of oxidation and reduction ranged from -1350mV to 1650mV. The scan rate was 50, 100, 150, and 200mV/s. It turned out that the C-V characterization of SUS 304 was irreversible process caused by the oxidation current from the cyclic voltammogram. After adding organic inhibitors, the adsorption film was constituted, and the passive phenomena happened. As a result, it was revealed that the inhibition effect of metal corrosion depends on the molecular interaction, and the interaction has influence on the adsorption complex.

• Structural Engineering and Mechanics
• /
• 제86권6호
• /
• pp.751-764
• /
• 2023

In practical engineering such as aerial refueling pipes, the boundary of the fluid-conveying pipe is difficult to be completely immovable. Pipes under movable and immovable boundaries are controlled by different dominant nonlinear factors, where the boundary mobility will affect the nonlinear dynamic characteristics, which should be focused on for adopting different strategies for vibration suppression and control. The nonlinear dynamic instability characteristics of functionally graded fluid-conveying pipes lying on a viscoelastic foundation under movable and immovable boundary conditions are systematically studied for the first time. Nonlinear factors involving nonlinear inertia and nonlinear curvature for pipes with a movable boundary as well as tensile hardening and nonlinear curvature for pipes with an immovable boundary are comprehensively considered during the derivation of the governing equations of the principal parametric resonance. The stability boundary and amplitude-frequency bifurcation diagrams are obtained by employing the two-step perturbation- incremental harmonic balance method (TSP-IHBM). Results show that the movability of the boundary of the pipe has a great influence on the vibration amplitude, bifurcation topology, and the physical meanings of the stability boundary due to different dominant nonlinear factors. This research has guidance significance for nonlinear dynamic design of fluid-conveying pipe with avoiding in the instability regions.

• 소성∙가공
• /
• 제28권6호
• /
• pp.368-374
• /
• 2019

The past recent years have seen an increasing use of high-strength steel sheets in the automotive industry. However, the formability and damage prediction of these materials requires accurate acquisition of necking and fracture strains. Digital image correlation (DIC) is used to accurately capture the necking and fracture strains during testing. The fact that single time points of capturing vary with frame rate makes the need for an investigation necessary. For the high-strength steel DP980, the frame-rate dependences of the final necking and fracture strains values are analyzed here. To eliminate the influence of gauge length, the strains were measured locally by DIC. Results for three specimen shapes obtained with frame rates of 1 and 900 fps (frames per second) were considered and based on them, triaxiality failure diagrams (TFD) are established. It was observed that after diffuse necking, the deformation path departed from the initially linear one, and the stress triaxiality grew with ongoing deformation. It was further revealed that the frame rate-dependence of the necking strain was rather low (< 2%), whereas the fracture strain could be underestimated by up to 8% when the lower frame rate of 1 fps was used (compared with 900 fps). In this study, this issue is investigated while taking into consideration the three different triaxialities. These results demonstrate the importance of choosing an appropriate frame rate for the determination of necking and fracture strains in particular.

• 한국실내디자인학회논문집
• /
• 제15권6호
• /
• pp.131-138
• /
• 2006

Contemporary society is lately going through various changes in social, economic, and cultural aspects due to rapid growth of information and computer technology. The digital revolution generated from the development of network reflects the decentralizing characteristic that connects local and personal interconnections. The following paper is designed to develop a basic understanding of digital architecture and show that digital virtual reality is not accidental phenomenon but it is actually evolved from nature and recreated in cyber space. The relationship between nature and digital architecture will be explained through the background research of how digital architecture was born and how it has been transformed. Also, it is designed to find out modern trends of digital architecture through diagrams and virtual space of hyper architecture and follow up the new phenomena appearing in the field of architecture. It is said that digital architecture is a new trend of architecture created from computer bit but all architecture that has form and shape cannot be independent of nature. Nature is the root of everything and even mechanical abstraction such as 'digital' can find its form in the immanence melted in the pure essence of nature. The research found that the nature approach of digital architecture also needs no more than 5 sequential references to find its genuine sketch as the hypertext theory shows we need only 5 sequential references to prove we are all related. Additionally, the cyber space that is become a general living space and a indispensable factor of digital architecture is a space that has obscurity and more open culture. It represents the characteristics of contemporaries in various aspects of society.

• 천문학회보
• /
• 제41권2호
• /
• pp.44.1-44.1
• /
• 2016

The Sagittarius-Carina spiral arm in the Galaxy contains several massive young open clusters. We present a deep optical photometric study on the massive young open clusters in the Sagittarius-Carina arm, Westerlund 2 and the young open clusters in the ${\eta}$ Carina nebula. Westerlund 2 is a less studied starburst-type cluster in the Galaxy. An abnormal reddening law for the intracluster medium of the young starburst-type cluster Westerlund 2 is determined to be $R_{V,cl}=4.14{\pm}0.08$. The distance modulus is determined from zero-age main-sequence fitting to the reddening-corrected color-magnitude diagrams of the early-type members to be $V_0-M_V=13.9{\pm}0.14mag$. The pre-main sequence (PMS) members of Westerlund 2 are selected by identifying the optical counterparts of X-ray emission sources from the Chandra X-ray observation and mid-infrared emission sources from the Spitzer/IRAC (the Infrared Array Camera) observation. The initial mass function (IMF) shows a slightly flat slope of ${\Gamma}=-1.1{\pm}0.1$ down to $5M_{\odot}$. The age of Westerlund 2 is estimated to be. 1.5 Myr from the main-sequence turn-on luminosity and the age distribution of PMS stars. The ${\eta}$ Carina nebula is the best laboratory for the investigation of the Galactic massive stars and low-mass star formation under the influence of numerous massive stars. We have performed deep wide-field CCD photometry of stars in the ${\eta}$ Carina nebula to determine the reddening law, distance, and the IMF of the clusters in the nebula. We present VRI and $H{\alpha}$ photometry of 130,571 stars from the images obtained with the 4m telescope at Cerro Tololo Inter-American Observatory (CTIO). RV,cl in the η Carina nebula gradually decreases from the southern part (~4.5, around Trumpler 14 and Trumpler 16) to the northern part around Trumpler 15 (~3.5). Distance to the young open clusters in the ${\eta}$ Carina nebula is partly revised based on the zero-age main-sequence fitting to the reddening-corrected color-magnitude diagrams (CMDs) and the (semi-) reddening-independent CMDs. We select the PMS members and candidates by identifying the optical counterparts of X-ray sources from the Chandra Carina Complex Survey and mid-infrared excess emission stars from the Spitzer Vela-Carina survey. From the evolutionary stage of massive stars and PMS stars, we obtain that the northern young open cluster Trumpler 15 is distinctively older than the southern young open clusters, Trumpler 14 (${\leq}2.5 Myr$) and Trumpler 16 (2.5-3.5 Myr). The slopes of the IMF of Trumpler 14, Trumpler 15, and Trumpler 16 are determined to be $-1.2{\pm}0.1$, $-1.5{\pm}0.3$, and $-1.1{\pm}0.1$, respectively. Based on the RV,cl of several young open clusters determined in this work and the previous studies of our group, We suggest that higher RV,cl values are commonly found for very young open clusters with the age of < 4 Myr. We also confirm the correlation between the slope of the IMF and the surface mass density of massive stars.

• 건축역사연구
• /
• 제3권2호
• /
• pp.47-66
• /
• 1994

Chosun dynasty had accepted the Confucianism as a means of governing whole society and in its practical aspect ${\ulcorner}$Garye${\lrcorner}$ and the ceremonies of family ritual regarded as important. As a result, after mid-Chosun dynasty family ritual was begun to popularized on a national scale, and the socio-culture system which was interrelated with it changed into confucian ones. These fill-scaled change, on the other hand, resulted into the change of spatial use and plan type of yangban houses. In this aspect, this study intends to clarify the influence of family ritual on spatial use of yangban houses through the comparison between ideal pattern and behavioral one of family ritual. And this study made Gwanhonrye except Sangjerye an object because these two ceremonies were peformed in sucession in those day's behavior. The research setting is the Korean traditional society prior to modernization. The collected materials are based on ethnographic information as well as personal documents, public records, field works and the books on family ritual. The methodology for the present study is primarily based on the comparison study between available documents and field work. Especially, as the books on family ritual include some explanatory diagrams of the ideal pattern, these diagrams are compared with another ones made by the author of the behavioral pattern. The major findings are as follows. Firstly, in the aspect of Gwanhonrye's process, the ideal pattern is similar to the behavioral one. But even the essential course of the ideal pattern of Honrye is 'chinyoung', it has never been accepcted in Chosun dynasty on account of 'seoryubuga'. Secondly, even though the names of the performing space of family ritual are different each pattern, the methods of spatial use in processing these two ceremonies are similar. In other words, according to the books on family ritual the major performing spaces of Gwanhonrye are 'chungsa' and 'jungchim', but in practical process of both ceremonies 'sarangchae' and 'anche' are used. Lastly, as family ritual like Gwanrye and Honrye had been practiced at yangban houses after mid-Chosun dynasty as mentioned above, the spatial arrangement had to be changed to a certain extent.