• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.4
• /
• pp.97-104
• /
• 2021

Despite the practical limitations of calculating the amount of inflow and supply related to the operation of agricultural reservoirs, the role of agricultural reservoirs is gradually being emphasized. In particular, as interest in disaster safety has increased, the demand for preliminary measures to prepare for disasters has been rising, for instance, pre-discharging agricultural reservoirs for flood control. The aim of this study is to analyze the plans for the flood season reservoir operation considering pre-discharge period and water level limit. Accordingly, we optimized the simulation of daily storage using the ratio correction factor (RCFs) and analyzed the amount of inflow and supply using K-HAS. In addition we developed the drought determination coefficient (k) as a indicator of water availability and applied it for supplementing the risk level criteria in the Drought Crisis Response Manual. The results showed that it would be difficult to set the water level limit during the flood period in the situation of little water supply for flood control in agricultural reservoirs. Therefore, it is necessary to operate the reservoir management regulations after measures such as securing additional storage water are established in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.529-536
• /
• 2008

The failure behavior of structures is changed under different loading rates, which might arise from the rate dependency of materials. This phenomenon has been focused in the engineering fields. However, the failure mechanism is not fully understood yet, so that it is hard to be implemented in numerical simulations. In this study, the numerical experiments to a brittle material are simulated by the Molecular Dynamics (MD) for understanding the rate dependent failure behavior. The material specimen with a notch is modeled for the compact tension test simulation. Lennard-Jones potential is used to describe the properties of a brittle material. Several dynamic failure features under 6 different loading rates are achieved from the numerical experiments, where remarkable characteristics such as crack roughness, crack recession/arrest, and crack branching are observed during the crack propagation. These observations are interpreted by the energy inflow-consumption rates. This study will provides insight about the dynamic failure mechanism under different loading rates. In addition, the applicability of the MD to the macroscopic mechanics is estimated by simulating the previous experimental research.

• Journal of Korea Water Resources Association
• /
• v.31 no.4
• /
• pp.503-512
• /
• 1998

When various elements of water balance are displayed at several points of a river network, the runoff amounts at an estuary especially tidal influenced are affected from the elements. This problem can be solved by a model that can generalize and formulate the elements and simulate daily runoff and water requirement. The WWASS model was built using DIROM for the simulation of daily runoff and water requirement, and the water balance elements were modeled to be balanced at the each control point of river network. The model was calibrated, verified and applied to the watershed for the Saemankeum tidal land reclamation development project. It showed that the results from the streamflow simulation at the Mankyung and Dongjin estuary were acceptable for the design of the Saemankeum estuary reservoir.

• The Journal of Information Systems
• /
• v.29 no.2
• /
• pp.131-147
• /
• 2020

Purpose The purpose of this study is to develop intelligent vehicle parking distribution system based on LoRa network at the circumstance of traffic congestion during cultural festival in a local city. This paper proposes a parking dispatch and distribution system using a Q-learning algorithm to rapidly disperse traffics that increases suddenly because of in-bound traffics from the outside of a city in the real-time base as well as to increase parking probability in a parking lot which is widely located in a city. Design/methodology/approach The system get information on realtime-base from the sensor network of IoT (LoRa network). It will contribute to solve the sudden increase in traffic and parking bottlenecks during local cultural festival. We applied the simulation system with Queuing model to the Yudeung Festival in Jinju, Korea. We proposed a Q-learning algorithm that could change the learning policy by setting the acceptability value of each parking lot as a threshold from the Jinju highway IC (Interchange) to the 7 parking lots. LoRa Network platform supports to browse parking resource information to each vehicle in realtime. The system updates Q-table periodically using Q-learning algorithm as soon as get information from parking lots. The Queuing Theory with Poisson arrival distribution is used to get probability distribution function. The Dijkstra algorithm is used to find the shortest distance. Findings This paper suggest a simulation test to verify the efficiency of Q-learning algorithm at the circumstance of high traffic jam in a city during local festival. As a result of the simulation, the proposed algorithm performed well even when each parking lot was somewhat saturated. When an intelligent learning system such as an O-learning algorithm is applied, it is possible to more effectively distribute the vehicle to a lot with a high parking probability when the vehicle inflow from the outside rapidly increases at a specific time, such as a local city cultural festival.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.469-473
• /
• 2001

It is very important that piping system shall meet the optimum design requirement as predicted in designing system. If the piping system proved not to meet the requirement in commission it shall be redesigned and corrected till the required capacity is satisfied. which costs much expense. The objective of this study is to understand steady 3-dimensional flow phenomena in a process piping system numerically. 3-dimensional numerical simulations with standard $k-{\epsilon}$ model were carried out by using ALGOR code for three cases of Reynolds number. 2500, 3500 and 4500, based on inlet pipe diameter and three cases of inflow air temperature, $20^{\circ}C,\;50^{\circ}C$ and $100^{\circ}C$.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.11a
• /
• pp.225-229
• /
• 2005

The objective of this study is to evaluate snowmelt impact on watershed hydrology using climate change scenarios on Soyanggang-dam and Chungju-dam watershed. SLURP model was used for analyzing hydrological changes based on climate changes. The results (in years 2050 and 2100) of climate changes scenarios was CCCma CGCM2 of SRES suggested by IPCC and the snow cover map and snow depth was derived from NOAA/AVHRR images. The model was calibrated and verified for dam inflow data from 1998 to 2001.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.618-622
• /
• 2006

충적 선상지(alluvial fan)는 자갈이나 유사가 과도하게 이송되어 부채모양으로 퇴적된 것으로서, 하류로 하폭이 증가하는 곳에서 형성된다. 충적 선상지는 유사가 이송하는 하천, 토석류, 그리고 박층류에 의해 형성된다. 토석류는 자갈에서부터 상대적으로 작은 진흙에 이르기까지 운반하는 밀도체이다. 충적하천의 흐름은 사행하천 및 망상하천에 이르는 흐름을 말하며, 박층류는 기본적으로 비하천 홍수류로서, 한 홍수사상에 대하여 선상지에서 부분분할로 형태로 흐른다. 본 연구에서는 충적 선상지에 대한 공학적인 문제를 검토하기 위한 예비연구로서 유입부에서 유사량의 유입조건에 따른 충적 선상지 델타의 형성 과정을 수치모형을 이용하여 파악하였다. 본 모형은 2차원 모형으로서, 이동경계좌표계를 사용하였고, 수치해석 기법으로는 CIP법이 이용되었으며, wet/dry를 고려하여, 유입 유사량의 변화에 따른 특성을 파악하였다. 초기에는 급격하게 선상지의 높이가 급격하게 증가하며, 유입 유사량의 증가에 따라 선상지의 높이가 평형상태를 유지하는 시간이 짧은 것을 보여주고 있다. 선상지의 면적은 유입 유사량이 적을 경우에는 평형상태가 지속적으로 유지되며, 완만한 증가 현상을 보여주었다. 유입 유사량이 증가할 경우에는 초기에 급격한 상승을 하다가 평형상태가 없이 지속적으로 상승하는 것을 보여주었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.583-587
• /
• 2009

This paper presents a series of numerical simulations on the thermal performance and sectional efficiency of a closed-loop vertical ground heat exchanger (U-loop) equipped in a geothermal heat pump system (GHP). A 3-D finite volume analysis (Fluent) was used to simulate the operating process of the closed-loop vertical ground heat exchanger by considering the effect of the thickness of HDPE pipe and grout thermal properties, distance between the inflow and outflow pipes, and the effectiveness of the latticed HDPE pipe system. It was observed that the thermal interference between the two strands of U-loop is of importance in determining the efficiency of the ground heat exchanger, and thus it is highly recommendable to modify the cross section configuration of the conventional U-loop system by including a thermally insulating latice between the two strands.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.812-815
• /
• 2007

Computational simulation has been performed to design the filtration system for Korea model IGCC demonstration plant. The filtration system for optimal design has four effective filters corresponding to the clusters composed of a group of ceramic candle filters. It was analyzed how the different entrance geometry influences the flow field and the particle behavior in the filtration system. The particle loading is minimum when the gas mixed with particles flows into the filter vessel with a shroud tube through a tangential inlet. However, the particle loading is maximum when the gas with particles enters the filter vessel through a normal inlet which a entrance tube extended from. By controling adequately both conditions of inflow, the filtration system can be operated optimally to prolong the filter life-time and to save the energy for cleaning filters.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.4
• /
• pp.3-11
• /
• 2004

A finite volume model is developed to simulate the surface irrigation at a paddy field. The model's capabilities are validated through comparison with the simulafed results and the observed data obtained by various experimental tests, and the simulated results are in good agreement with the observed pending depth. The result of surface irrigation simulation shows that the longer the paddy field's the length of long-sided becomes, the longer the advance and storage time is taken. To analyze surface irrigation performance with variable inflow rate, three patterns of flow variation-constant rate, initially high then low, and initially low then high-were studied. The results show that at the pattern with initially high followed by low during the latter half of the irrigation the advance time is shortest, but the pending depth of irrigation completion and irrigation effiency are the little difference between irrigation patterns.