• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.177-183
• /
• 2004

The out-of-positioned small female drivers are most likely to be injured during airbag deployment due to their stature and proximity to the steering wheel and airbag module. In order to investigate the injury mechanisms, some experimental studies with Hybrid III 5% female dummy and with female cadavers could be found from the open literatures. However, the given information from those experimental studies is quite limited to the standard conditions and might not be enough to estimate the airbag inflation aggressiveness regarding on the occupant responses and injury. In this study, a finite element analysis has been performed in order to investigate the airbag-induced injuries. A finite element 5% female human model in anatomical details has been developed. The validation results of the model are also introduced in this paper.

• Journal of Biosystems Engineering
• /
• v.18 no.3
• /
• pp.220-229
• /
• 1993

A dimensional analysis was carried out to investigate if model agricultural radial tire can predict the tractive performance of prototype tires. Experimental data was analyzed to prove the results of dimensional analysis. The results was summerized as follows ; 1. When the model and prototype tires are tested under the same soil conditions, inflation pressure, slip and dynamic load, traction coefficient ratio between two tires depend on the geometry of two tires. 2. According to the regression analysis of the experimental data, traction equation parameters of the prototype tires can be predicted from the that of model tire 3. Predicted traction coefficient of prototype tire, calculated from the traction equation paramters, showed good correlation with that of experimental results. Thus it was possible to predict net and gross traction of prototype tire from the model traction equation parameters.

• Journal of Trauma and Injury
• /
• v.33 no.3
• /
• pp.140-143
• /
• 2020

Resuscitative endovascular balloon occlusion of the aorta (REBOA) has been accepted as an adjunct procedure for non-compressible torso hemorrhage in patients with hemorrhagic shock. With appropriate indications, REBOA should be performed for resuscitation regardless of the physician's specialty. Despite its effectiveness in traumatized patients with hemorrhagic shock, performing REBOA has been challenging due to physicians' lack of experience. Even though training in endovascular skills is mandatory, many physicians cannot undergo sufficient training because of the limited number of endovascular simulation programs. Herein, we share simulation video clips, including those of a vascular circuit model for simulation; sheath preparation; long guidewire and balloon catheter preparation; ultrasound-guided arterial access; sheath insertion or upsizing; and balloon positioning, inflation, and migration. The aim of this study was to provide educational video clips to improve physicians' endovascular skills for REBOA.

• Tribology and Lubricants
• /
• v.30 no.1
• /
• pp.52-58
• /
• 2014

Because food crops serve as the raw materials for biodiesel, the increasing use of biodiesel as an alternative fuel can lead to adverse effects such as food price inflation and may contribute to global starvation. To solve these problems, efforts are being made to explore various nonedible raw materials for producing biodiesel. Different raw materials impart different fuel characteristics to biodiesel. In this study, we synthesized pure fatty acid methyl ester (FAME), which is a biodiesel component, and then analyzed its fuel properties. The fuel properties of pure FAME would be useful in producing biodiesel from various new raw materials.

• Korean Business Review
• /
• v.2
• /
• pp.141-169
• /
• 1989

Most of the theories of collective bargaining outcomes start with a set of economic variables. The economic constraints, pressures, and incentives influence the bargaining power relationship between labor union and employer. In this paper, the critical macro and micro economic variables that need to be considered in analyzing the economic context of collective bargaining power relationship is outlined. The focus is on the role that economic forces play in shaping the results of bargaining, that is the outcome of negotiations. In this study, the elasticity of the demand for labor is introduced as one of the most important economic aspects that influence bargaining power. Unions will be most successful in increasing wages when they enjoy an inelastic demand for labor. If the demand for labor is not naturally inelastic, some institutional arrangement for "taking wages out of competition" must be sought. Inflation, business cycle, and income policy are influential in shaping both parties' goals and expectations as well. In addition to the analysis of the economic variables, the nature of power is diagonized with some introductory notions about its care and feeding before proceeding to the details of the above issues.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.10a
• /
• pp.176-183
• /
• 1996

A new iterative scheme is proposed for finite element analysis of wrinkling or tension structures. This enables us to update the stress state and the internal forces correctly taking into account the existence of wrinkling. The finite element implementation of the scheme is straightforward and simple, and only minor modifications of the existing total Lagrangian finite element codes for membranes are needed. The validity of the scheme is demonstrated via numerical examples for the torsion of a membrane and the quasi-static inflation of an automotive airbag, both made of isotropic or anisotropic elastic membranes

• Journal of Communications and Networks
• /
• v.8 no.4
• /
• pp.378-390
• /
• 2006

Many distributed applications build overlays on top of the Internet. Several unsolved issues at the network layer can explain this trend to implement network services such as multicast, mobility, and security at the application layer. On one hand, overlays creating basic topologies are usually limited in flexibility and scalability. On the other hand, overlays creating complex topologies require some form of application level addressing, routing, and naming mechanisms. Our aim is to design an efficient and robust addressing, routing, and naming infrastructure for these complex overlays. Our only assumption is that they are deployed over the Internet topology. Applications that use our middleware will be relieved from managing their own overlay topologies. Our infrastructure is based on the separation of the naming and the addressing planes and provides a convergence plane for the current heterogeneous Internet environment. To implement this property, we have designed a scalable distributed k-resilient name to address binding system. This paper describes the design of our overlay infrastructure and presents performance results concerning its routing scalability, its path inflation efficiency and its resilience to network dynamics.

• Korean Journal of Plant Resources
• /
• v.6 no.1
• /
• pp.77-82
• /
• 1993

Basidia of Entoloma squamiferrum are developed from hymenium layer of cartor-shaped parabasidium. Apex of basidium is flat or depressed in the center. Although four sterigmata are developed, only two sterigmata are symmetrically swollen to two spores im certain basidia. It means that two sterigmata among four sterigmata are imfertil. A spore is formed by inflation of the apex of the sterigma. The apex of the sterigma is swollen into a paillaform and then turned into a penisform. It is swollen from a clubform into a globefrom. Six spots of the surfaces of globose spore are depressed with hilum axes. Finally the spore is cuboid, and then it is released from hilum.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.274-279
• /
• 2000

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zero-energy modes of the element. An inflation analysis and a lateral deformation analysis of an air spring are carried out. Numerical analysis results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force.

• Journal of Yeungnam Medical Science
• /
• v.21 no.1
• /
• pp.127-131
• /
• 2004

A laryngeal mask airway (LMA) has many advantages in the management of airway emergencies or the treatment of patients in whom intubation is difficult, but the use of LMA during positive ventilation may seem inappropriate to protect the airway because of the risk of pulmonary aspiration of regurgitated gastric contents. We experienced aspiration pneumonia after general anesthesia using LMA in patient who suffered from panperitonitis. It is considered that the main reason for aspiration pneumonia was a leakage of gastric content through the space surrounding the nasogastric tube while under high airway inflation pressure. We concluded that when LMA or the Proseal laryngeal mask airway (PLMA) is chosen for the use in difficult intubations, careful patient-suitability selection and the correct knowledge of LMA and PLMA are needed to protect the airway against aspiration.