• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.374-380
• /
• 2012

In guided missile systems, reducing terminal-position error is the primary objective of the inertial navigation system. As a seeker is used to sense and track a target, the critical function of the inertial navigation system is to provide the seeker with accurate missile attitude information and help the seeker to keep tracking a target continuously. As inertial sensor body and missile body alignment errors are taken into account, it is desirable to minimize the alignment errors between the missile seeker and the attitude of inertial navigation system. Among the alignment errors, this paper addresses the methods of measuring and compensating misalignment between inertial sensor body and housing frame and shows test results of several experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.372-375
• /
• 1995

The LQG/LTR controller design procedure for ground alignment of inertial platform is accomplished. Due to the alignment system dynamics, LQG/LTR controller is proposed to overcome both singular problem and nonsquare problem. To show the effectiveness of this control system, computer simulation was performed under the assumption of random sway motion.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.26-26
• /
• 2000

We study on the velocity matching algorithm for transfer alignment of inertial navigation system(INS) using robust H$_2$ filter. We suggest an uncertainty model for INS and apply the suggested discrete robust H$_2$ filter to the uncertainty model compared with kalman filter, the discrete robust H$_2$ filter is shown by simulation to have good performance of alignment time and accuracy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.433-439
• /
• 2018

In this paper, a SDINS(strapdown inertial navigation system) rapid initial alignment technique with adaptive time delay compensation is proposed. The proposed method consists of two steps. In first step, misalignment and data latency are estimated by conducting pre-transfer alignment. Then, hybrid alignment is designed to rapidly find the misalignment changes induced by pyro-shock. To improve the performance of hybrid alignment, adaptive time delay compensation method is suggested. We verify the performance improvement of the proposed alignment scheme comparing with the conventional transfer alignment method by van test. The test result shows that the proposed alignment technique improves alignment performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.138-145
• /
• 2000

In this paper an initial alignment algorithm for a strapdown inertial navigation system is implemented using a RISC CPU board. The algorithm computes roll pitch and yaw angles of the direction cosine matrix utilizing measured components of the specific force and earth rate when the navigation system is stationary. The coarse alignment algorithm is performed first and then the fine alignment algorithm containing a 3rd-order gyrocompass loop follows. The experimental set consists of an IMU a CPU board and a monitoring system Experimental results show that the implemented algorithm can be utilized in navigation systems.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.109-113
• /
• 2006

This paper presents an in-flight alignment method for strapdown inertial navigation systems based on the line-of-sight information. Unlike the existing methods, the proposed method utilizes only the 2-axis angle measurements of the onboard image sensor and does not require any explicit range measurements between the vehicle and landmarks. To improve the accuracy of all the position, velocity, and attitude estimates through the in-flight alignment, an error model of the image-sensor-aided SDINS is derived. A simulation study demonstrates that the accuracy of SDINS can be improved by the line-of-sight information only.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.500-506
• /
• 2018

In this paper, we considered the one-shot alignment using master inertial navigation system (MINS) and slave inertial navigation system (SINS) in the missile to find the exact posture of a missile. In order to perform one-shot alignment, the tilt angle between MINS and SINS must be obtained, which can be compensated by obtaining the tilt angle between missile round and SINS. The tilt angle was calculated by using the roll rotation of missile round, jig for rotating the missile round and interface structure to measure the horizontal state by using a horizontal angle meter were constructed. As a result of the tilt angle save (TAS) inspection, the tilt angle ${\alpha}$, ${\beta}$, ${\gamma}$ is normal range and it is possible to perform one-shot alignment by compensating this value.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.1
• /
• pp.41-48
• /
• 2019

This paper deals with a method of aligning an aircraft fuselage and an inertial navigation sensor using three-dimensional coordinates obtained by an optical method. In order to verify the feasibility, we introduce the method to accurately align the coordinate system of the inertial navigation sensor and the aircraft reference coordinate system. It is verified through simulation that reflects the error level of the measuring device. In addition, optimization method based alignment algorithm is proposed for connection between optical sensor and inertial navigation sensor.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.181-186
• /
• 2015

A High-degree Cubature Kalman Filter (CKF) is proposed to deal with the Strapdown Inertial Navigation System (SDINS) alignment problem. In-flight Alignment (IFA) is an effective method to compensate for attitude errors of the navigation system. While providing precise attitude error compensation, however, the external source aided alignment often creates a nonlinear filtering problem caused by a large misalignment angle. Introduced recently, Cubature Kalman Filter is a suitable technique for various nonlinear problems. In this paper, a higher degree CKF is applied to this accuracy-is-everything SDINS IFA problem. The simulation results show that the proposed technique outperformed a traditional nonlinear filter in terms of precision and alignment time.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.225-233
• /
• 2001

This paper deals with the transfer alignment problem of SDINS(StrapDown Inertial Navigation System) subjected to roll and pitch motions of the ship. Specifically, to reduce alignment errors induced by measurement time-delay and ship body flexure, an error compensation method is suggested based on delay state augmentation and DCM(Direction Cosine Matrix) partial matching. A linearized error model for the velocity and attitude matching transfer alignment system is first derived by linearizing the nonlinear measurement equation with respect to its time delay and augmenting the delay state into the conventional linear state equations. And then DCM partial matching is properly combined to reduce effects of a ship's Y axis flexure. The simulation results show that the suggested method is effective enough resulting in considerably less azimuth alignment errors.