• Defense and Technology
• /
• no.4 s.266
• /
• pp.44-51
• /
• 2001

보병화기의 전투효율성 향상을 위해 세계 각국은 소총에서 구경축소, 경량화, 체계화 등 꾸준한 개량발전을 시도하여 왔으나 실제 전투상황하에서의 명중률 증대측면에서는 결정적인 개선을 가져오지 못했다고 평가하고, 소총의 기본 설계개념과 세계 각국의 차기소총 개발현황 및 발전추세에 대하여 개괄적으로 고찰해 보았다. 따라서 이와 함께 현용 K-1A 기관단총, K-2 소총의 Life Cycle(20-30년)을 고려할 때 2000년대 초에는 차기소총의 대체 필요성을 제시하고자 한다.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.277-281
• /
• 2004

The establishment and application of risk management system is one of the current issues in world-wide leading companies. Poor risk management might bring large-scale accident in construction industry by its features(large scale, diversity). Standardization system and standard for risk should be managed timely. In this paper, we do comparative analysis of standardization systems and standards concerned on risk, so thus present basic data for safety reinforcement and risk zero in the construction life cycle process.

• Clean Technology
• /
• v.2 no.2
• /
• pp.192-200
• /
• 1996

Basic strategies are needed to adopt and implement clean technologies in machine industries. In this paper, hazardous or non hazardous wastes generated from the machine industries are classified based on the origin of the wastes and the importance of the life cycle of the products including gesign stages as well as ultimate disposal is also addressed.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.417-423
• /
• 2007

This paper describes how using the XPS Document technologies of Windows Vista support and enhances interactions with the structural design and construction process. It illustrates the document workflows and the document life cycle in a typical construction base knowledge system. It provides engineers and decision makers and implementers with information about this new technology and how they can apply it to their design and construction models. The paper also highlights opportunities for the new format of data exchange in the recent efforts to develop National Management System Standards for Transportation Applications to benefit from these emerging technologies.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.79-84
• /
• 2002

The bottom-leaded plastic(BLP) packages have attracted substantial attention since its appearance in the electronic industry. Since the solder materials have relatively low creep resistance and are susceptible to low cycle fatigue, the life of the solder joints under the thermal loading is a critical issue for the reliability The represent study established a finite element model for the analysis of the solder joint reliability under thermal cyclic loading. An elasto-plastic constitutive relation was adopted for solder materials in the modeling and analysis. A 28-pin BLP assembly is modeled to investigate the effects of various epoxy molding compound, leadframe materials on solder joint reliability. The fatigue life of solder joint is estimated by the modified Coffin-Hanson equation. The two coefficients in the equation are also determined. A new design for lead is also evaluated by using finite element analysis. Parametric studies have been conducted to investigate the dependence of solder joint fatigue life on various package materials.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.1
• /
• pp.24-30
• /
• 2009

In this paper, the effect of heat treatment on forgeability is investigated and an improved heat treatment cycle is proposed for the bearing steel, SUJ2. An application example of a bearing inner race cold forging, which has small cracks in the bottom after backward extrusion and piercing, is found from a cold forging industry. The process is evaluated by finite element analysis and several heat treatment cycles are examined in order to propose an improved heat treatment cycle. The effect of heat treatment on material hardness and tool life, dimensional accuracy and forming load is revealed through experiment.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.33-38
• /
• 2012

The wafer positioning robot in the semiconductor industry is required to operate at high speed for the improvement of productivity. The residual vibration caused by the high speed of the wafer positioning robot, however, makes the life of the robot shorter and the cycle time longer. In this study, the input shaping and the path of the system are designed for the reduction of the residual vibration and the improvement of the cycle time. The followings are the process for the reduction and the improvement; 1) System modeling of the wafer positioning robot, 2) Verification of dynamic characteristics of the wafer positioning robot, 3) Input shaping plan using impulse response reiteration, 4) Simulation test using SIMULINK program, 5) Analysis of result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.559-563
• /
• 2005

The wafer positioning robot used in the semiconductor industry is required to operate at high speed for the improvement of productivity. However, the residual vibration produced by the high speed of the wafer positioning robot makes the life of the robot shorter and the cycle time longer. In this study, the input shaping and the path of the system are designed for the reduction of the residual vibration and the optimization of the cycle time. The followings are the process for the reduction and the optimization; 1)System modeling of wafer positioning robot, 2)Verification of dynamic characteristic of wafer positioning robot, 3)Input shaping plan using impulse response reiteration, 4)Simulation test using simulink, 6)Analysis of result.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.4
• /
• pp.383-389
• /
• 2011

The negative fishery factors from an environmental perspective are greenhouse gas emissions due to high fossil fuel use, destruction of underwater ecosystems by bottom trawls, a reduction in resources by fishing, and damage to ecosystem diversity. In particular, the greenhouse gas emissions from fisheries is an important issue based on the Cancun meeting in Mexico in 1992 and the Kyoto protocol in 2005. However, no investigations on the GHG emissions from Korean fisheries have been conducted. Therefore, a quantitative analysis of GHG emissions from the Korean fishery industry is needed as a first step to identify a method to reduce GHG emissions from fisheries. The purpose of this study was to investigate the degree of GHG emitted from fisheries. Here, we calculated the GHG emissions from four main Korean fisheries(i.e., large trawls, large purse seines, Danish seines, and bottom pair trawls) using the life cycle assessment(LCA) method. The system boundary and input parameters for each process level were defined for LCA analysis. The fuel use coefficient of each fishery was also calculated. The GHG emissions from edible seafood were calculated considering different consuming areas. The results will be helpful to understand GHG emissions from Korean fisheries.

• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.363-368
• /
• 2017

The external diseconomy is hampering sustainable development of the city logistics sector. Burdens on urban environment imposed by the city logistics industry have been put in the spotlight. Based on the principle of Life Cycle Analysis, the comprehensive environment impact for city logistics systems is measured. Firstly, with the city logistics service chain as a whole, its business processes and their interactions with environment are analyzed. In total four types of major environment impact categories are determined. Secondly, case study is made on three city logistics operators located in Jing-Jin-Ji region of China with different business modes, respectively self-operation mode, joint distribution mode and the $3^{rd}$ Party Logistics or 3PL mode. Through analysis of energy consumption and emissions for various business processes, their comprehensive environmental impact values are finally obtained. Thirdly, horizontally comparative analysis is carried out to these three modes of the urban logistics distribution systems. Results show the advantages of the 3PL and the joint distribution modes in developing greener urban logistics distribution. Future research avenues and policy suggestions are proposed finally.