• Advances in concrete construction
• /
• v.17 no.2
• /
• pp.75-92
• /
• 2024

High Strength steel reinforced Reactive Powder Concrete (RPC) Beam is a new type of beams which has evident advantages than the conventional concrete beams. However, there is limited research on the shear bearing capacity of high-strength steel reinforced RPC structures, and there is a lack of theoretical support for structural design. In order to promote the application of high-strength steel reinforced RPC structures in engineering, it is necessary to select a shear model and derive applicable calculation methods. By considering the shear span ratio, steel fiber volume ratio, longitudinal reinforcement ratio, stirrup ratio, section shape, horizontal web reinforcement ratio, stirrup configuration angle and other variables in the shear test of 32 high-strength steel reinforced RPC beams, the applicability of three theoretical methods to the shear bearing capacity of high-strength steel reinforced RPC beams was explored. The plasticity theory adopts the RPC200 biaxial failure criterion, establishes an equilibrium equation based on the principle of virtual work, and derives the calculation formula for the shear bearing capacity of high-strength steel reinforced RPC beams; Based on the Strut and Tie Theory, considering the softening phenomenon of RPC, a failure criterion is established, and the balance equation and deformation coordination condition of the combined force are combined to derive the calculation formula for the shear bearing capacity of high-strength reinforced RPC beams; Based on the Rankine theory and Rankine failure criterion, taking into account the influence of size effects, a calculation formula for the shear bearing capacity of high-strength reinforced RPC beams is derived. Experimental data is used for verification, and the results are in good agreement with a small coefficient of variation.

• Korean Journal of Social Welfare Studies
• /
• no.37
• /
• pp.117-144
• /
• 2008

This is a timeseries study on the riving forces behind the changes of Korean welfare state. There are a few previous studies on the determinants of korean welfare state. These previous studies have some limitations in terms of reliability of the data source and validity of the statistical method used. Using the Comparative Social Policy Data-set(CSPD), we try to overcome the limitation of these previous studies. And adapting the time series regression, we examine the hypotheses about the changes of korean welfare state. In this study, four dependent variables are examined: the ratio of public social welfare expenditure to the GDP(WELGDP), the ratio of public social welfare expenditure to the government budget(WELGOV), the ratio of social expenditure to the GDP(SOCX), social welfare expenditure per capita. And independent variables were selected based on the theoretical background on the changes of welfare state. The results of this study as follows: First, the variables based on structural functionalism (industrialization) are the major driving forces behind the changes of korean welfare state since 1960s. Second, the effect of unemployment variable may be reasonably interpreted as reflecting the residual characteristics of korean welfare state. Third, the politics of the left based on power resource theory should be restrictedly interpreted. Ultimately, korean welfare state is still at rudimentary stage where the theory of industrialization is well applied as a driving forces behind the changes of welfare state.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.2 s.39
• /
• pp.191-199
• /
• 1999

This paper is the first step on the study of the industrialization of the mid-story steel building structures. The purpose of this study is to investigate the structural behavior of concrete-filled square steel tubular column to H-beam connections using angles and high tension bolts. The tests are carried out with five types of specimens under static loading and the main parameter is the thickness of angles. Yield-line theory which obtains connection strength by way of the lowest value based on upper-limit theory is applied to predict strength formulas.

• Journal of architectural history
• /
• v.1 no.2 s.2
• /
• pp.116-136
• /
• 1992

Architectural essence of John Ruskin's discourse can resolve itself into natural beauty, craftmanship, and truth in structure, surface, and process. His theories became disciplines of modern English school, Art and Craft and Free architecture, in aspects of organic architecture, morality, and rationality. These concepts disseminated continental Art Nouveau and also became it's basic principles. But his empirical theories hated use of machine, and should find a ideal model in medieval romanticism of Gothic. Anti-machine, as a instictive guideline of English modern architecture, couldn't cope with the industrialization of 20th century, and Gothic revival interfered with creating a new style. Muthesius' discourses were taught by the power of group movements and modern concept of form in English school, originally by Ruskin. But he accepted the potentiality of machine and mass production, and stressed creating the new German style suitable with machine. With the progress of Deutscher Werkbund, his theories were advanced to 'quality' connected with craftmanship, to discourse on mechanical 'form', and lastly to 'standardization and type' for mass production. Mechanical functionalism of Muthesius and DWB were sophiscated and handed down to Bauhaus, and then finally helped establishment of the Modern Architecture and Internationalism. Both English and German modern architecture owed their contribution as well as limitation to Ruskin and Muthesius as theorists. Through this comparative study, we can see the priority of theory to practice, the theoretical justification based on insight for its society and future, and the practical character of theory itself.

• Archives of design research
• /
• v.6 no.1
• /
• pp.73-86
• /
• 1993

The development of Korean textile industry has continued for the early industrialization. But a change in situation of circumstances, textile industry undergoes hard times. To overcome the barrier, therefore, technical development and design innovation are needed to make high value added product. This paper try to put to practical use of the silk weighting process technique(WPT). First, we investigate the technical trend of WPT to summarize the theory, and examine the feasibility of technical development. Second, the application of Graft process to silk textile is examined to know whether it is possible as an practical use. Next, we present the practical way of WPT using MAA monomer through experiment. The results are as follow. 1) Considering the lack of silk yarn. Graft process is appropriate new technique to make the value added product, and fine quality. 2) Studing textile goods, it need inter-displlinary co-work not only fiber engineering scope because textile goods is closely related with fashion industry. 3) MAA monomer used in this paper is more excellent then other monomer because it has good weighting effect and does not harm to the nature of textile. 4) MAA WPT is good for silk textiles of ladies jacket and neck-tie.

• Journal of the Economic Geographical Society of Korea
• /
• v.21 no.4
• /
• pp.409-424
• /
• 2018

Since the 1950s, many of the traditional industrial cities of advanced economies in Europe and North America were affected by a series of de-industrialization. The de-industrialization process, characterized by company shut-downs and massive lay-offs, has resulted in high unemployment rates and massive redundancies in physical infrastructure. Since the 1980s, many of the old industrial cities have attempted to overcome such problems. However, it has been found that not many of the cities are found to be successful. The City of Dortmund, one of the core cities of the large German industrial conurbation of the past, the Ruhr, is found to be an exceptional case demonstrating a clear success in overcoming deindustrialization problems. The City in fact strategically pursued transforming backbone of its economy from steel-making, coal-mining and beer-brewery to high-technology and future-oriented industries, based on microsystems, biomedical, electronic logistics and information technology. This paper attempts to analyse the processes and outcomes of transforming Dortmund beginning from the 1980s to articulate the roles of the agencies contributing to the success.

• Korean Journal of Social Welfare
• /
• v.60 no.3
• /
• pp.31-58
• /
• 2008

This study examines applying the elderly poverty labor hypothesis and skill-biased technological change hypothesis to labor force participation rate(LFPR) of older males in Korea. These hypotheses have hardly been examined on the this group. The analysis is based on the data "Summary of economically active population($1965{\sim}2007$)", "Population projection($1965{\sim}2007$)", "Report on wage structure survey($1993{\sim}2005$)" and "Korea Labor and Income Panel Study($1998{\sim}2006$)". The method employed for this study is logistic regression. The main results from this analysis are summarized in five points. Firstly, Korean older males' LFPR have been increasing since 1965 when industrialization was expanding at full steam. This trend has been different from the decreasing trend of industrialized countries. The second finding is that poor older males' LFPR is, on the average, 5.2% higher than that of non-poor older males from 1998 to 2005. The third result is that the non-elderly man has been increasingly positioned at higher grade occupations, while the elderly man has been held at lower grade occupations. The fourth is that labor demand for highly educated workers has exceeded the increased labor supply of the group, while the demand for low educated workers has decreased far beyond the declined labor supply. As a result, college premium has increased from 139% in 1993 to 157.8% in 2005. The final main implication of this study is that the industrialization theory and modernization hypothesis still holds for the LFPR of Korean older males. However, the elderly affluence hypothesis of the LFPR of older males are hardly persuasive in explaining Korean phenomenon. Especially, we find that the elderly poverty is the main mechanism in determining the Korean LFPR in old ages. This supports the elderly poverty labor hypothesis presented in this study. Skill-biased technological change hypothesis partially explains the LFPR of older man. However, we believe that other factors; human capital specially high school education rather than university education and skill required in less skill biased occupations or the poverty; also have taken effect.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.53-62
• /
• 2020

The COVID 19 pandemic has led to a new global recession and is still causing a lot of issues because of the delays in the employment of people. This scenario has severe consequences for many countries' labor markets in the world. This problem's complexity and importance requires an integrated method of subjective and objective evaluation rather than intuitive decisions. This research aims to investigate sustainable indexes for assessing the unemployment problem by using a Multi-Criteria Decision-Making Model (MCDM). Grey theory and Decision Making Trial and Evaluation Laboratory (GDEMATEL) are deployed to transform the experts' opinions into quantitative data. The analysis based on 20 crucial criteria is employed to determine the weights of sustainability of unemployment problems. The results revealed that the top ten of determinants are Economic growth, Industrialization, Foreign direct investment, Real GDP per capita, Education level, Trade Openness, Capacity Utilization Rate, Urbanization, Employability skills, Education system expansion, which have the most significant effects on the unemployment rate under COVID 19 impacts. Furthermore, GDEMATEL could effectively assess the sustainable indicators for unemployment problems in "deep and wide" aspects. The study proposes the Grey MCDM model, contributes to the literature, provides future research directions, and helps policymakers and researchers achieve the best solutions to the unemployment problems under "economic shocks."

• Korean Journal of Social Welfare
• /
• v.57 no.3
• /
• pp.277-304
• /
• 2005

The review of the literature shows that analysts tend to follow two approaches in their investigation of the differences in terms of the development of welfare state. The first approach focused on the logic of industrialization. In this account, technological and structural changes rather than political choices of ideological preferences and culture create the conditions for the emergence of welfare state. The second approach emphasizes the importance of the growth of unionization for the development of welfare state. However, this study analyses the development of welfare state by using cultural theory developed by Mary Douglas. Culture theory has a specific point of departure : the grid-group typology proposed by Mary Douglas. Group refers to the extent to which an individual is incorporated into bounded units. Grid denotes the degree to which an individual's life is circumscribed by externally imposed prescriptions. Hierarchical culture (high grid-high group) favors social conservatism, giving government the right to intervene in matters of social institutions. Germany and Japan belong to this culture. Individualistic culture (low grid-low group) reluctant to develop social insurance programs. Individuals who are bound by neither group incorporation nor prescribed roles inhabit an individualistic social context. Great Britain and the United Sates of America belong to this culture. Egalitarian culture (low grid-high group) prefer to develop social insurance program. Strong group boundaries couples with minimal prescriptions produce social relations that are egalitarian. Sweden belong to this culture.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.1
• /
• pp.200-213
• /
• 2014

During the 1970s and 1980s, most of the industrial cities of the Western World went through serious de-industrialization process. While the economy of the cities declined, the cities were suffering from the lack of job opportunities, under-use of industrial infrastructure, and environmental degradation. Many of the cities attempted to tackle such problems, but very few of them have succeeded. However, the Ruhr area is showing some promising signs. This paper attempts to analyze regional revitalization policies of Dortmund, a central city of the Ruhr, and looks into the processes and outcomes of the policies. The author argues Dortmund has successfully created and set forth a new industrial path based on high-tech industries, such as information technology, micro-electromechanical systems(MEMS), logistics, and biomedical industries, away from its traditional industries, such as coal mining and steel making. Speaking from the perspective of path theory, he continues to argue that Dortmund has successfully 'locked-out' from the traditional industries, in contrast to the Grabher's argument.