• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.171-181
• /
• 1999

The half of njuries by carrying-unloading machinery was injuries due to crane. The purpose of this study was to analyze present condition of injuries by the crane, to investigate hazard management model, injury prevention technique, and to suggest safety countermeasures of crane working. The hazard management model is composed of 5 rules and 10 methods. The rules are to remove, separate, protect, make up and correspond. Prior to this crane countermeasures, general protection for head, foot and hand are needed. Hazard prevention affects on industrial management economically and psychologically. The preparation of safety countermeasures are very important for the prevention of industrial injuries, The countermeasures are setting-up of safety culture, active and rationale safety education. As the industrial safety and health system should be performed for the employees' health and life, the industrial competitive power and productivity would be improved.

• Journal of Trauma and Injury
• /
• 제28권1호
• /
• pp.15-20
• /
• 2015

Purpose: Vascular injuries caused by traffic, industrial accidents and by outside activities have increased in Korea. Especially, vascular injuries to the extremities can lead to limb loss and even mortality if they are not appropriately treated. The aim of the study was to evaluate the surgical outcomes of femoropopliteal vascular management after trauma. Methods: The medical records of 12 patients with femoropopliteal vascular injuries who were treated at Dankook University Hospital from 2011 to 2013 were reviewed. Iatrogenic vascular injuries were excluded. The clinical data including the causes of injury, associated injuries and surgical outcomes were analyzed retrospectively. Results: All patients were male, with a mean age of $46.8{\pm}16.3years$ (range: 26~69 years). The causes of vascular injuries were four traffic accidents, three industrial accidents, two iron plates, one outside activity, one glass injury and one knife injury. The average transit time between the place of the accident place and the emergency department was $3.0{\pm}2.1$ (0.5~12.5) hours, and the average preparation time for surgery was $8.0{\pm}6.7$ (1.7~23.3) hours. The anatomic injuries included the popliteal vessel in seven cases and the femoral vessel in five cases. The average Injury Severity Score (ISS) was $12.0{\pm}5.0$ (5~17), and the average Mangled Extremity Severity Score (MESS) was $5.7{\pm}2.1$ (2~9). The operation methods were four interposition grafts, three end-to-end anastomoses, two direct repairs and three patch angioplasties. One case required amputation of the injured extremity. Conclusion: Early recognition and revascularization of the injured vessel are mandatory to reduce limb loss and to obtain satisfactory outcomes. Therefore, careful/rapid evaluation of the vascular injuries and timely/successful surgical treatment are the keys to salvaging an injured limb.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.323-335
• /
• 1999

Spinal injuries are common these days and are increasing due to the increasing sports activities, auto-related accidents, and occupational incidences. Most of spinal injuries of strain and sprain are associated with trauma and resulted in loss of optimal musculoskeletal system in spinal column area. Some of these injuries requires surgical treatments. Fortunately, some people with spinal disorder are achieving outstanding results with the chiropractic care which utilizes muscle stimulation and strengthening, traction therapy, and spinal adjustments. These treatments using chiropractic table can ease pain by restoring alignment, improving mobility, and relieving pain and stiffness in neck and spinal areas. The purpose of this study was thus to gather the comprehensive information about spinal injuries, to define the specific dimensions, and to recommend functions of chiropractic table specially suited for Korean. This study was an integrated approach in applying the concepts of biomechanical correction of the musculoskeletal system. Also, this study was to utilize a knowledge of physics, ergonomics, and rehabilitation to the development of spine cure medicine.

• Journal of Chest Surgery
• /
• 제28권9호
• /
• pp.842-846
• /
• 1995

Recently, the trauma patients have been markedly increasing due to the vast increase of traffic accident, industrial disaster, incidental accident and violence. The authors have analysed of 22 patients of thoracic injuries combined with abdominal injuries and summarized as follows. The ratio of male to female was 3.4:1 and their age distribution was from 5 years to 68 years and mean age was 34.4 years. The etiologies of injury were traffic accident, stab wound, fall down and violence. Associated injuries were fractures, bowel perforation, kidney rupture, head injury, liver laceration, spleen rupture and so forth. The modes of treatment were closed thoracostomy, repair of diaphragm, ruptured bowel repair, explo-thoracotomy, splenectomy, hepatic lobectomy in this order of frequency. The postoperative complications were atelectasis, wound infection, pneumonia, empyema, acute renal failure, respiratory failure and bleeding. The mortality rate was 13.6% [3/22 and the causes of death were respiratory failure 1 case, acute renal failure 1 case and hypovolemic shock 1 case.

• 산업경영시스템학회지
• /
• 제23권56호
• /
• pp.65-85
• /
• 2000

Industrial accidents have been consistently increased in terms of medical costs, lost work days, and incidence rates every year in Korea. Since the infrastructure of the industry changed shifts rapidly from 1980s in the developing countries such as South Korea, the nature and magnitude of the industrial accidents have also undergone a major shift. The situation is especially severe in small-to-medium sized industry(SMI). This article reports the development of a systematic evaluation system of risk factors specifically for the SMIs. The new approach introduced by this article is geared to the systematic identification and evaluation of the injuries from power press machines using the Analytic Hierarchy Process with the key evaluation data generated and evaluated by the employees on site. A total of 21 companies was studied and surveyed using the hierarchical structures of the cause-effect relationship of the mechanical injuries and their countermeasures. For the relative weighting of each risk factor, separate questionnaire survey was conducted for the selected workers from each company who had worked for more than 10 years in press work. Most participants (48 out of 62) replied that human attributes were the most significant factors for mechanical injuries fellowed by administration, machine, and work environment factors. The result also showed that the self-motivated risk assessment and safety enhancement activities would be an effective and efficient way of managing the risk factors in the SMIs.

• 산업공학
• /
• 제14권1호
• /
• pp.106-110
• /
• 2001

The importance of development of occupational safety index is truly great. It will contribute to the wise direction of safety program. In present, frequency and severity ratios were the standard measure. These terms express the incidence of major injuries and severity of the major injuries experience, each with relation to the employee-hours of work exposure during the period that is measured. But these measure don't expressed the dangerous feeling degree of worker. In this study, Effective Industrial Safety Index(EISI) was developed using dangerous feeling degree of worker, frequency of injuries, and severity of injury. EISI can be used as an aid for effective safety management in workplace.

• 대한인간공학회지
• /
• 제36권3호
• /
• pp.231-244
• /
• 2017

Objective: This study aims to understand the occupational injury characteristics of the workers in the motor vehicle parts (automobile parts) manufacturing industry and to present basic guidelines on accident prevention through accident analysis. Background: There occur many occupational injuries in the motor vehicle parts manufacturing industry. But there were few researches for the occupational injuries of the workers in the motor vehicle parts manufacturing industry. Method: This study analyzed the data of occupational injuries of 1,609 workers in the motor vehicle parts manufacturing industry in 2015. The accident characteristics were analyzed by dividing them into worker related factors and accident related factors. Results: Among the occupational injuries of the workers in the motor vehicle parts manufacturing industry, 80.6% of the victims were males, 64.0% were older than 40. 57.8% of the victims were employed by the companies with less than 50 workers. In addition, there was a difference in accident characteristics according to age, work experience, employment type, events or exposures, accident time of the day, agents, natures of injuries and illnesses, injured organs and injured body part. Conclusion: It is important to prevent equipment/machinery accidents. For this purpose, more efforts should be made to establish safety measures faithful to the basics of safety devices and safety work procedures. It is also suggested that prevention of disasters should be intensively carried out for workplaces with less than 50 employees and middle-aged and elderly people. Application: The result can be used to present guidelines for preventative measures for the workers in the motor vehicle parts manufacturing industry including safety education/training.

• 한국직업건강간호학회지
• /
• 제25권2호
• /
• pp.85-95
• /
• 2016

Purpose: The purpose of this study was to examine the burn characteristics of female patients hospitalized in a burn center. Methods: This is a retrospective descriptive study. The subjects were 222 female patients aged over 19 years old having burn injuries from work sites between January 1, 2012 and December 31, 2014. Data were collected using electronic medical records about the burn-related characteristics. The data were analyzed descriptively. Results: Many of the subjects were in their forties and fifties. Most subjects showed burns with an area of less than 10% of the body surface with a severity of second degree. Scalding burns were the most frequent. Contact burns were usually of third-degree severity and occurred on hands and wrists. Flame burns affected the largest body surface area and frequently occurred on the face and mainly caused by explosion of a stove or kitchen gas. Chemical burns frequently occurred on the lower limbs. Conclusion: Female workers are exposed to the hazards of burn injuries in industrial accidents. Types of burn differ depending on the workplace conditions. Therefore, preventative measures for burn injuries should be established in accordance with the characteristics of each industry to which female workers belong.

• Journal of Chest Surgery
• /
• 제24권11호
• /
• pp.1115-1124
• /
• 1991

Recently the thoracic injuries have been markedly increasing due to the vast increase of traffic accident, industrial disaster, and incidental accident as well as the frequent use of the murderous weapons including gun or rifle. Because the thoracic injuries could involve the heart, lung, and great vessels, and would influence the lives, prompt diagnosis and adequate treatment are essential. Most of thoracic injuries can be managed with the conservative treatment and simple surgical procedure such as closed thoracostomy, but certain cases require open thoracotomy to preserve lives and to return to their normal environment. The authors have analysed the result of 53 cases of open thoracotomy after thoracic injuries mainly according to the patient`s chart review. The mean age was 33.4 years old and male to female ratio was about 5: l. Injury mechanisms that elicited thoracic trauma indicated for open thoracotomy were penetrating[47%] and non-penetrating[53%] injuries. The Most common type of the thoracic lesion was hemothorax with or without pneumothorax and diaphragm rupture was the second. 58\ulcornero of thoracic injuries were accompanied by abdominal injuries and 47% by bone fractures. 34 patients were operated within 24 hours after injury and their average elapsed time was 13.6 hour. The remained patients were operated after 24 hours and their average elapsed time was 7.8 days. 71 cases of operative procedures containing some overlappings were performed: diaphragm repair[28], bleeding control[12], pulmonary and cardiac repair[4 cases] Postoperative complication rate was 32.1% and operative mortality rate was 9.4%[5/53].

• 한국산업보건학회지
• /
• 제16권1호
• /
• pp.17-26
• /
• 2006

In order to obtain basic reference information for the establishment of effective industrial safety programmes in migrant workers who live in Seoul and Kyungin Area, accident causes were investigated among 210 injured workers. The data were analyzed according to the USA Standards Institute and International Labour Organization method. The results obtained were as follows: 1. The major distribution of national were mostly from china(82.9%), ages are mostly between 30 and 40 years old(32%), and males are more than females, and mostly married. 2. The parts of body most frequently injured were hand and finger, foot and toe, which were 55.3% of total 210 cases. 3. According to the accident type, caught in, under or between were most frequently observed, 40.2% of the total number of injuries. 4. The most responsible source of injuries were power machine, others, moving machine and tool, building construction. 5. According to the unsafe acts, carelessness and unsafety information were most frequently observed, 66.7% of the total number of injuries. 6. There were significantly difference(p<0.05), between type of accident and source of injury, and between working period and unsafe act.