• Journal of Korea Entertainment Industry Association
• /
• v.13 no.6
• /
• pp.221-233
• /
• 2019

The purpose of this study tries to show the effectiveness of integrated theater education for low-grade students who lack social skills with the direction of art education based on 'theatrical and educational theater' and 'theater therapy' in the revised curriculum in 2015. To do this, the researcher organized a theater camp organized by the social, cultural and arts education institute in Seoul for a total of 12 low-grade elementary school students for four weeks, and had a presentation session. In addition, the researcher observed the behavioral changes of the participating children to verify the social development of the theater education and after the conclusion, the final results were obtained through the in-depth interviews of the participants' parents and teachers. As a result, it was found that Social Skills Rating System(SSRS)' test, teachers' observation logs, interviews, and responses of participating children, which are the main subjects of this activity, had a great effect on improving their sociality and relationship. Therefore, the researcher tried to prove through this paper that theater education is effective in enhancing social skills as creative, personality and convergence education in preparation for the 4th industrial era and that it is important to solve communication problems such as the absence of human relationships.

• Clean Technology
• /
• v.15 no.4
• /
• pp.258-264
• /
• 2009

Thermodynamic measurements were performed to show the possibility of recovering $CO_2$ from fuel gas (the mixture of $CO_2$ and $H_2$) by forming gas hydrates with water where water was dispersed in the pores of silica gel particles having nominal 100 nm of pore diameter. The hydrate-phase equilibria for the ternary $CO_2+H_2$+water in pores were measured and $CO_2$ concentrations in vapor and hydrate phase were determined under the hydrate-vapor two phase region at constant 274.15 K. It was shown that the inhibition effect appeared due to silica gel pores, and the corresponding equilibrium dissociation pressures became higher than those of bulk water hydrates at a specific temperature. In addition, direct measurement of $CO_2$ content in the hydrate phase showed that the retrieved gas from the dissociation of hydrate contained more than 95 mol% of $CO_2$ when 42 mol% of $CO_2$ and balanced Hz mixture was applied. Compared with data obtained in case of bulk water hydrates, which showed just 83 mol% of $CO_2$ where 2-stage hydrate slurry reactor was intended to utilize this property, the hydrate formation in porous silica gel has enhanced the feasibility of $CO_2$ separation process. Hydrate formation as not for slurry but solid particle makes it possible to used fixed bed reactor, and can be a merit of well-understood technologies in the industrial field.

• Clean Technology
• /
• v.16 no.3
• /
• pp.213-219
• /
• 2010

Vortex tube is the device that can separate small particles from the compressed gas, as well as compressed gas into hot and cold gas. Due to energy and particle separation ability, a vortex tube can be used as the main component of the $CO_2$ absorption device. In this study, experimental approach has been performed to analyze the energy separation characteristics of the vortex tube. To obtain the preliminary design data, energy separation characteristics of the vortex tube has been tested for orifice diameter, nozzle area ratio, and tube length. As a result, the orifice diameter is the major factor of the vortex tube design. The nozzle area ratio and tube length have a minor effect on the energy separation performance. For Dc=0.6D, AR=0.14~0.16, and L=16D, maximum energy separation has been occurred. The result from this study can be used as the basic design data of the $100Nm^3$/hr class vortex tube applied to the $CO_2$ absorption device. Compared with the $CO_2$ absorption process containing an absorption tower, the process with a vortex tube is expected to have a huge advantage of saving the installation space and the operating cost.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.192-198
• /
• 2023

In this study, the components of microwave-assisted extracts obtained from Thuja orientalis leaves were analyzed, and the cytotoxicity, antibacterial and antiviral activities were evaluated. The predominant components from microwave-assisted extraction were catechin, leucopelargonidin, arecatannin, quinolone, and kaempferol derivatives, which are classified in the flavonoid and tannin groups. We observed that the 0.11 mg/mL of extract concentration did not show cytotoxicity in HaCaT cells. The antibacterial activities were tested according to the guidelines of methods for determining the bactericidal activity of antimicrobial agents. The extracts showed 99.9% antibacterial efficiency against gram-positive S. aureus, while the antibacterial effect on gram-negative E. coli was insignificant. When the extract concentration and contact time with bacteria were increased, 99.9% antibacterial efficiency was observed for E. coli as well as S. aureus. Following the standard to assess the activity of microbicides against viruses in suspension (ASTM-E1052-20), the antiviral efficiency was more than 99.99% for influenza A (H1N1) and SARS-CoV-2. These results suggest its potential use in antiviral disinfectants, surface coatings, personal protective equipment, and textiles.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.697-702
• /
• 2023

Recently, with the introduction of drones, a core technology of the 4th industrial revolution, various convergence education using drones is being conducted in school education sites. In particular, drone theory and practice education is being conducted in connection with free semester classes and career exploration. The drone convergence education program has higher learner satisfaction than simple demonstration and practice education, and the learning effect is high due to direct practical experience. However, since practical education is being conducted for a large number of learners, it is impossible to restrict and control the flight of a large number of drones in a limited place. In this paper, we propose a monitoring system that allows the instructor to monitor multiple drones in real time and learners to recognize collisions between drones in advance when multiple drones are operated, focusing on education operated in schools. The communication module used in the experiment was equipped with GPS in Murata LoRa, and the server and client were configured to enable monitoring based on the location data received in real time. The performance of the proposed system was evaluated in an open space, and it was confirmed that the communication signal was good up to a distance of about 120m. In other words, it was confirmed that 25 educational drones can be controlled within a range of 240m and the instructor can monitor them.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.76-95
• /
• 2023

As information and communications technology-based "smart hospitals" and "digital healthcare" have become a hot topic in the healthcare field, hospital mobile apps are gaining attention; but, the utilization rate is low due to lack of publicity, unstable systems, and late updates. In this situation, systematic research is needed to increase the utilization rate of hospital mobile apps, but related research has been rare. Therefore, this study integrates the information systems success model (ISSM) from the technical perspective and the expectation-confirmation model (ECM) from the cognitive perspective to demonstrate the influence mechanism on the continuous use intention of hospital mobile apps. For this purpose, an online survey was conducted among 181 Korean adults who have used hospital mobile apps. The results of the structual equation modeling showed that most of the quality factors have significant effects on expectation confirmation, perceived usefulness, and satisfaction. Additionally, expectation confirmation significantly affects perceived usefulness and satisfaction, and both perceived usefulness and satisfaction significantly affect the continuous use intention of hospital mobile apps. This study is of importance in that it integrates the ISSM and ECM and applies them to the context of using hospital mobile apps, which are underutilized in the healthcare field, and provides practical implications for increasing the utilization rate of hospital mobile apps and operating effective and efficient services through the findings.

• Journal of Life Science
• /
• v.33 no.4
• /
• pp.363-370
• /
• 2023

In order to use Cudrania tricuspidata extract for the development of health-functional food, biological changes in normal rodents, such as changes in blood constituent cells, blood lipids, and anti-inflammatory activity, were measured after the rodents had been drinking the substance for 2 weeks. A 30 mg daily dose of the extract taken for 2 weeks produced no change in body weight or renal function, and no toxicity was observed. Increased red blood cell levels and white blood cell levels were confirmed, and platelet counts tended to increase; thus, the extract seems to cause an overall increase in blood cells. In the case of blood lipids, it was confirmed that the extract-treated group exhibited an effect of improved blood-lipid levels, demonstrated through an increase in HDL-C of 21%, with a decrease in triglyceride of 27% compared to the control group. In addition, the decreases in both GOT and GPT led to improved liver function through use of the extract. Therefore, this study suggests that drinking Cudrania tricuspidata extract can have various effects, such as promoting blood cell production, improving blood lipids profile, improving liver function, and improving inflammatory action. The extract would be useful in the future in developing high-value industrial products such as functional foods and pharmaceuticals.

• Industry Promotion Research
• /
• v.8 no.2
• /
• pp.29-36
• /
• 2023

Summary This study summarizes the results of analyzing 410 questionnaires from October 15 to October 26, 2022 on the impact of ESG management of SMEs on organizational productivity improvement. First, all areas except for clarity of promotion, validity of content, efficiency of method, sub-areas of employee friendliness and productivity improvement, which are sub-areas of ESG management, labor welfare, job satisfaction, and employee "favorability, retention attitude" among organizational management. Since there is a correlation in , work efficiency can be maximized by appropriately adjusting sub-variables of ESG management. Second, it can help an organization prioritize for productivity improvement through the zodiac correlation. The causal analysis showed that clarity of promotion (β=.342) and validity of content (β=.276) had the most influence. Third, from ESG management. The correlation between clarity of promotion, validity of content, efficiency of method, friendliness of employees and organizational management showed a high correlation at .719, and causal analysis showed that efficiency of method (β=.455) and friendliness of employees (β= .217) was found to have an influence on organizational management, which indicates that personnel organization management is necessary to increase the efficiency of the method (β=.455). This study is meaningful in revealing the causal relationship between ESG management performance and productivity improvement in the middle.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.697-704
• /
• 2021

It is hard to get Filaments which are materials of the 3D printing Fused Deposition Modeling(FDM) method as radiation shielding in Korea. and also related research is insufficient. This study aims to provide basic data for the development of radiation shields using 3D printing by evaluating the physical properties and radiation shielding capabilities of filaments containing metal particles. after selecting five metal filaments containing metal particle reinforcement materials, the radiation shielding rate was calculated according to the Korean Industrial Standard's protective equipment test method to evaluate physical properties such as tensile strength, density, X-ray Diffraction(XRD), and weight measurement using ASTM's evaluation method. In the tensile strength evaluation, PLA + SS was the highest, ABS + W was the lowest, and ABS + W is 3.13 g/cm³ which value was the highest among the composite filaments in the density evaluation. As a result of the XRD, it may be confirmed that the XRD peak pattern of the particles on the surface of the specimen coincides with the pattern of each particle reinforcing material powder metal, and thus it was confirmed that the printed specimen contained powder metal. The shielding effect for each 3D printed composite filament was found to have a high shielding rate in proportion to the effective atomic number and density in the order of ABS + W, ABS + Bi, PLA+SS, PLA + Cu, and PLA + Al. In this study, it was confirmed that the metal particle composite filament containing metal powder as a reinforcing material has radiation shielding ability, and the possibility of using a radiation shielding filament in the future.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.641-650
• /
• 2022

The purpose of this study was to compare the efficiency of air and oxygen injected into the underwater non-thermal dielectric barrier discharge plasma (DBD plasma) device used to remove five types of antibiotics (tetracycline, doxycycline, oxytetracycline, clindamycin, and erythromycin) artificially contained in the fish farm discharge water. The voltage given to generate DBD plasma was 27.8 kV, and the measurement intervals were 0, 0.5, 1, 2, 4, 8, 16 and 32 minutes. Tetracycline antibiotics significantly decreased in 4 minutes when air was injected and were reduced in 30 seconds when oxygen was injected. After the introduction of air and oxygen at 32 minutes, 78.1% and 95.8% of tetracycline were removed, 77.1% and 96.3% of doxycycline were removed, and 77.1% and 95.5% of oxytetracycline were removed, respectively. In air and oxygen, 59.6% and 83.0% of clindamycin and 53.3% and 74.3% of erythromycin were removed, respectively. The two antibiotics showed lower removal efficiency than tetracyclines. In conclusion, fish farm discharge water contains five different types of antibiotics that can be reduced using underwater DBD plasma, and oxygen gas injection outperformed air in terms of removal efficiency.