• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.78-88
• /
• 2022

Objectives: To develop the smart sensor to protect worker's health from chemical exposure by adopting ICT (Information and Communications Technology) technologies. Methods: To develope real-time chemical exposure monitoring system, IoT (Internet of Things) sensor technology and regulations were reviewed. We developed and produced smart sensor. A smart sensor is a system consisting of a sensor unit, a communication unit, and a platform. To verify the performance of smart sensors, each sensor has been certified by the Korea Laboratory Accreditation Scheme (KOLAS). Results: Chemicals (TVOC; Total Volatile Organic Compounds, Cl₂: Chlorine, HF: Hydrogen fluoride and HCN: Hydrogen cyanide) were selected according to a priority logic (KOSHA Alert, acute poisoning statistics, literature review). Notifications were set according to OEL (occupational exposure limit). Sensors were selected based on OEL and the capabilities of the sensors. Communication is designed to use LTE (Long Term Evolution) and Wi-Fi at the same time for convenience. Electronic platform were applied to build this monitoring system. Conclusions: Real-time monitoring system for OEL of hazardous chemicals in workplace was developed. Smart sensor can detect chemicals to complement monitoring of traditional workplace environmental monitoring such as short term and peak exposure. Further research is needed to expand the scope of application, improve reliability, and systematically application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1170-1178
• /
• 2013

Thanks to various benefits, low-cost real-time communication networks so called fieldbus have been widely used in many industrial applications including military systems, such as aircrafts, submarines, and robots. This paper presents a reliability analysis of dual-channel CAN(Controller Area Network) fieldbus which is used for controlling various equipment of submarine combat system. A submarine combat system playing a critical role to the success of missions and survivability consists of various devices including sensors/actuators and computers. Since a communication network for submarine combat system must satisfy an extremely high level of reliability, a dual channel technique is commonly adopted. In this paper, a Petri Net based reliability model for dual-channel CAN is discussed. A reliability model called generalized stochastic Petri Nets (GSPN) is built by utilizing the information on physical faults with CAN. The effectiveness of the proposed model is analyzed in terms of unreliability with respect to failure rate and repair rate.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.61-73
• /
• 2012

In this study, the information and communication technology ICT companies, 312 companies, in order to analyze the impact of the effect of satisfaction on the Exhibition and Convention on the impact of Information and Communication Technology Exhibition and Convention satisfaction effects analysis by information and communication technology Convention e-Portal affect the infrastructure system, exhibition and Convention, Convention Industry competitiveness, Convention, Convention Tour Program components to satisfy Convention effect empirically the effect on information and Communications Technology exhibition and Convention industry Convention and satisfaction effects on were analyzed. A result was able to find that information and communication technology goods and technology, tourism technology infrastructure technologies program, e-portal system, industrial competitiveness and technology Exhibition and Convention of Effects. Exhibition and Convention ensure the effect of the base material and environmental factors, these factors determine the product development laid the foundation. Product type defined, you can see that affecting economic ripple effects and satisfaction. Exhibition and Convention can achieve the effect of information and communication technologies to reduce your operating costs.

• Communications for Statistical Applications and Methods
• /
• v.18 no.3
• /
• pp.287-294
• /
• 2011

Peer assessment is an educational valuation system that involves studying with a colleague and granting value to the progress made by the colleague. Although this method has many merits, there is also a drawback pertaining to calculating the mean of the scores that were granted to the levels of contribution. However, this has been improved upon by a diversified study. However, the concept of the chi-square test and p-value used in the preceding study is not easy individuals engaged in the industrial engineering field or education when using peer assessment. This study uses simple statistics like standard deviation, in addition to, investigating the availability of a suggested method as well as examples of utility and application. This study can contribute to increase the convenience of users through the use of convenience analysis and with this method.

• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.155-170
• /
• 2007

The purpose of this study was to estimate key competencies according to their levels in order to understand person's ability in automobile fields of school and workplace. For this study, key competencies consisting of mathematical skills, problem solving skills, communications skills, self management and development skills, resources recycling skills, interpersonal relationship skills, technological skills, information skills, organizational understanding skills were determined. We examined the related literatures to determine the level of key competencies and diverse opinions were accommodated with visits to workplace in order to enhance the validity of the results of this study. Based on the results of this study, it was concluded that the estimation of key competencies according to their levels was possible and valid.

• IE interfaces
• /
• v.17 no.spc
• /
• pp.111-121
• /
• 2004

In this paper, we propose an urgency and efficiency based wireless packet scheduling (UEPS) algorithm that is able to schedule real time (RT) and non-real time (NRT) traffics at the same time. The proposed UEPS algorithm is designed to support wireless downlink packet scheduling in the OFDMA system which is a strong candidate wireless system for the next generation mobile communications. The UEPS algorithm uses the time-utility function as a scheduling urgency factor and the relative status of the current channel to the average one as an efficiency indicator of radio resource usage. The design goal of the UEPS algorithm is to maximize throughput of NRT traffics with satisfying QoS requirements of RT traffics. The simulation study shows that the proposed UEPS algorithm is able to give better throughput performance than existing wireless packet scheduling algorithms such as proportional fair (PF) and modified-largest weighted delay first (M-LWDF) while satisfying QoS requirements of RT traffics such as the average delay and the packet loss rate under various traffic loads.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.90-99
• /
• 2004

High speed info-communications equipment are required with development of highly information-oriented society, the intelligent industrial facilities and social systems such as administrative, financial and traffic systems, are gradually becoming to automation, which are composed of the integrated circuits and micro-semiconductors, remote control and operation. Thus modern micro-electronic circuits can frequently be damaged by lightning surge. The protection of electronic circuits from lightning overvoltages is concentrated very interesting. In this paper, for the purpose of providing the effective protection method of electronic devices such micro-computers from lightning surges in a residential building, the protection effect of surge protective devices according to types of system groundings were experimentally analyzed. Also the effective installation method of surge protective devices was examined and proposed. The installation of SPDs in retrofits was a high remnant voltage across the protected device owing to the inductance in the long wires to the SPDs. Finally the method of installing the SPD by twisted pain wires is remarkably effective for fast rising transient overvoltages.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2279-2284
• /
• 2017

Recent wireless communications using the unlicensed band have been on the rise and the range of use is increasing. The license-exempted band is a prerequisite for accepting interference between telecommunication equipment. In particular, the interference phenomenon of Bluetooth, wireless LAN, and RFID (Radio Frequency Identification) using the 2.4 GHz band is getting serious. In such urban areas, the wireless transmission medium may be in a bad state. There are roughly two ways to make effective transmission in this environment. The first is the IEEE 802.11 RTS / CTS method and the second is the frame fragmentation method. In this paper, it is difficult to transmit a frame over a certain size in a jamming environment due to the interference of the wireless environment. In this environment, we implement a frame division transmission scheme that guarantees effective transmission and reliability by dividing a frame into smaller units in order to perform reliability transmission and efficient transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1394-1402
• /
• 2011

This paper describes solar light collecting system which employs parabolic reflector and Fresnel lens and its industrial application. We have introduced second-stage optical system so that it makes optical fiber overcome its numerical aperture limitation and also it makes focused light become collimated, which results in decreased light energy density. As result of these, light collecting efficiency become maximized and the system does not require separate cooling apparatus any more. The developed solar lighting system together with artificial light source like LED has been applied to plant factory as a hybrid lighting source. This makes us save electric energy for artificial lighting during day time. The intensity of LED light in the hybrid lighting system is controlled automatically according to ambient-light-sensor installed in the system so that the light intensity for a plant always keeps the same level no matter how the sun light changes. For a plant factory whose size is 330 square meters, when solar lighting system is applied, 28,080KWh electric energy can be saved per month.2 times.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.451-459
• /
• 2007

RFID it reads information which is it writes, the semiconductor chip for and the radio frequency system which uses the hazard antenna it has built-in transmission of information it talks. Formation which is transmitted like this collection and America which it filtrates wey the RFID search service back to inform the location of the server which has commodity information which relates with an object past record server. The hazard where measurement analysis result the leader for electronic interference does not occur consequently together from with verification test the power level which is received from the antenna grade where it stands must maintain minimum -55dBm and the electronic interference will not occur with the fact that, antenna and reel his recognition distance the maximum 7m until the recognition which is possible but smooth hazard it must stand and and with the fact that it will do from within and and and 3-4m it must be used Jig it is thought.