• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.249-257
• /
• 2017

Filtering the data for travel time records obtained from DSRC probes is essential for a better estimation of the link travel time. This study addresses the major deficiency in the performance of TRANSGUIDE in removing anomalous data. This algorithm is unable to handle unstable traffic flow conditions for certain time intervals, where fluctuations are observed. In this regard, this study proposes an algorithm that is capable of overcoming the weaknesses of TRANSGUIDE. If TRANSGUIDE fails to validate sufficient number of observations inside one time interval, another process specifies a new validity range based on the median absolute deviation (MAD), a common statistical approach. The proposed algorithm suggests the parameters, ${\alpha}$ and ${\beta}$, to consider the maximum allowed outlier within a one-time interval to respond to certain traffic flow conditions. The parameter estimation relies on historical data because it needs to be updated frequently. To test the proposed algorithm, the DSRC probe travel time data were collected from a multilane highway road section. Calibration of the model was performed by statistical data analysis through using cumulative relative frequency. The qualitative evaluation shows satisfactory performance. The proposed model overcomes the deficiency associated with the rapid change in travel time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.537-544
• /
• 2016

National Competency Standards (NCS) need to be introduced to train newly hired staff and to gradually improve employees' work performance in the information security industry. In particular, the introduction of a new NCS curriculum for new hires is important in order to retain and efficiently manage professionals in the information security field. However, the legacy NCS is not clearly designed for the information security field. So a formal curriculum has been suggested for institutions training the information security workforce. Therefore, this study establishes a competency unit based on the types of personnel, their duties, and required knowledge. To select the competency unit, this study reviewed prior research to understand the required skills and work knowledge, and reviewed recruitment-based NCS that public agencies and public and private companies have carried out, including them in the study. The selected competency unit was classified into a required competency unit and an elective competency unit based on the importance of the duties and the demands of training. Through a verification process for the new, licensed career path model in the NCS information and communications field, this study suggests updated NCS competency units and required courses to provide an appropriate NCS curriculum for newly hired employees in the information security industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.340-347
• /
• 2016

Since the 1970s, manufacturing has been one of the key driving forces that has led to Korea's economic growth. However, this growth rate has been reduced significantly since the 2000s, and shows that revenues and employment are steadily decreasing. In addition, while manufacturing investment in Korea has dropped sharply, the United States, Germany, Japan, and other major countries have increased investment in manufacturing. These countries have promoted manufacturing innovation strategies that include the convergence of information and communications technologies (ICT) and manufacturing. For manufacturing innovation, it is important for time and cost savings required for product development to be achieved by changes in the production process, especially product design. Modeling and simulation (M&S) is a process that replaces physical product design, mockup making, and testing, with virtual product creation (modeling) and engineering analysis (simulation). In this paper, we analyze the economic ripple effect of supercomputing M&S using an input-output model technique based on the input-output tables published by the Bank of Korea. When we set the M&S budget (about US$16 million for the last 10 years) of the Korea Institute of Science and Technology Information (KISTI) as input coefficients, the effect on production inducement, value-added inducement, and employment inducement was analyzed to be US$24 million, US$13.4 million, and 267, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.46-54
• /
• 2018

The Internet of Things (IoT) is an environment in which various devices provide services to users through communications. Because of the nature of the IoT, data are stored and distributed in heterogeneous information systems. In this situation, IoT end applications should be able to access data without having information on where the data are or what the type of storage is. This mechanism is called Service Discovery (SD). However, some problems arise, since the current SD architectures search for data in physical devices. First, turnaround time increases from searching for services based on physical location. Second, there is a need for a data structure to manage devices and services separately. These increase the administrator's service configuration complexity. As a result, the device-oriented SD structure is not suitable to the IoT. Therefore, we propose an SD structure called Name-based Service-centric Service Discovery (NSSD). NSSD provides name-based centralized SD and uses the IoT edge gateway as a cache server to speed up service discovery. Simulation results show that NSSD provides about twice the improvement in average turnaround time, compared to existing domain name system and distributed hash table SD architectures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.372-377
• /
• 2016

Communication flow is changing rapidly. Recently, a range of wearable devices such as wearable glasses and wearable watch, have been launched. These kinds of wearable devices help people to live a more comfortable life. Wearable devices most have an antenna for wireless communication. This paper reports a transparent antenna that is made of an optically transparent material for wearable glasses. Transparent antenna can be applied to smart windows and will not disturb the view of user. IZTO/Ag/IZTO multilayer electrode has higher electrical and optical properties. This antenna is available because of its good electrical properties. This study measured the performance of the proposed transparent antenna, which is made of a multilayer electrode, applied to a lens. The proposed antenna was simulated with several substrates. The antenna impedance was matched with length and width of the antenna. The antenna's conductivity and transparency was measured using a HMS-3000 and UV-spectrometer. A 40nm thick Ag single layer antenna was fabricated on a flexible polyimide substrate for comparing the antenna performances. The fabricated antenna is useable at a frequency of 2.4-2.5GHz, which is suitable for Wifi communications and has peak gain of 2.89dBi and an efficiency of 34%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6604-6610
• /
• 2015

In this paper, an efficient Wireless Access in Vehicular Environment (WAVE) packet transmission scheme for railroad communication is proposed. WAVE communication is a wireless local area network (WLAN) based communication and it is developed to be suitable for vehicular communication. There has been a lot of study on WAVE's applicability to Intelligent Transport System (ITS). As one of main transportation methods, by using WAVE, quality of railroad communication including WLAN based Communication Based Train Control (CBTC) can be enhanced and variety of railroad communication systems can be integrated into WAVE. However, there are technical challenges to adopt WAVE in railroad communications. For the simplest single-PHY WAVE, time division alternation of 50ms between Control Channel (CCH) and Service Channel (SCH) is required. Since there are delay sensitive railroad traffic types, alternation operation of CCH and SCH may cause performance degradation. In this paper, after identifying a couple of problems based on detailed analysis, a novel packet transmission scheme under railroad environment is proposed. In order to verify if the proposed scheme meets the requirement of railroad communication, WAVE transmission is mathematically modeled.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6888-6894
• /
• 2015

Bluetooth 4.0 is the most appropriate technology for Internet of Things, which can be used to enhance and expand the existing areas and areas with a variety of applications. In this paper, an example of the services of the Internet of Things, we developed a tour guide system using the Bluetooth 4.0 and WiFi sensor technology. iBeacon-based push service have been limited to iOS smart phone series, non-iOS family and lower version of iOS 6 smart phones can not receive push-based services. This paper proposed in iBeacon and WiFi sensor is more than tourists, while maintaining the existing system (non-iOS smartphone users) can provide the service to you. Service tourist information as well as that can provide the advertising associated with the service. With 10 kinds of smart phones used in Korea was the experiment on the MAC information collected. This experiment is to track the behaviour of tourists in history can provide customized services can be based. Tourist destinations as well as amusement parks, resorts, etc. If you want to apply this system in a crowded place for user behavior information-gathering feature views over the a prevention of a missing child features such as notifications, risk, prevention is possible for a variety of applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1740-1748
• /
• 2014

In this paper, we propose an RBAC based personalized health care service platform in order to provide smart management of personal health record using smart devices. It helps to guide healthful service and provide useful information according to one's individual health record. Personalized health care services platform supports a healthy lifestyle by measuring personal health information in a hospital clinical, imaging, and drug data, as well as that can be obtained from smart devices. Everyone can enter his health related data in everyday life such as food, sleeping time, mood, movement and exercise so that one can manage his personal health information of modern smart features. In addition, if necessary, personal health information can be provided to the hospital information system and staff with the consent of the individual. It can be contributed to simplify the complex process for remote medical. The proposed platform, which applies role based access control model to protect security and privacy, supports a smart health care services for users by providing personalized health care services through the smart applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.574-580
• /
• 2016

In this paper, we will introduce the system that can control multiple vehicles on the road through Single Board Computers and V2I (Vehicle-To-Infrastructure). Also, we will propose the group evasive maneuver decision algorithm, which plays a critical role in deciding whether the vehicles in the system have to conduct evasive maneuvers to avoid obstacles on the road. In order to test this system, we have utilized Wi-Fi and TCP/IP for establishing the communication between multiple vehicles and the relay server, and observed their driving states on the road with obstacles. During the experiments, we have discovered that our original decision algorithm possesses high failure rate when there is frequency interference in ISM (Industrial Scientific Medical) band. In order to reduce this failure rate, we have implemented the data transition detector. This paper will focus on how the use of data transition detector can affect the reliability of the system under the frequency interference of ISM band. If this technology is improved and applied in the field, we will effectively deal with such dangerous situations as multiple collision accidents through vehicle-to-vehicle communication or vehicle-to-infrastructure communication. Furthermore, this can be applied to the autonomous driving technologies. This can be used as the reference data for the development of the similar system.

• Science of Emotion and Sensibility
• /
• v.20 no.1
• /
• pp.105-114
• /
• 2017

Nowadays, novel and innovative technology including 3D printers, internet of things (IoT), and wearable devices are rapidly emerging. As we must constantly keep up with the most recent trends, words like convergence, multidisciplinarity, and design revolution indeed define society today. Due to the expansion of such diverse technological, industrial, and academic convergence trends, the role of design is becoming evermore essential in development of products as well as creative services. Even the government is pushing towards a 'creative economy' by encouraging ICT convergence to create novel industries as well as advanced jobs. In order to adapt flexibly to such changes in global trends, a solid academic curriculum centered around 'ICT+Design' must be developed. In the current research, we analyzed various literature and benchmarked the major universities both domestic and foreign. Also we utilized a survey-based approach against subjects who are experts or design specialists working in environments related to industry and research. In our proposed integrated ICT+Design educational curriculum, students familiarize themselves with design perspectives and methodology to creatively carry out the course. Moreover, experts from design and ICT came together in an act of 'Radical Collaboration' in which they shared their unique 'Design Thinking' in order to promote understanding and cooperation. Furthermore, industry experts have also taken part as mentors in order to create a workplace-oriented course with various integrated projects. Most importantly, the course was designed so that in addition to research, students can really get hands-on with their ideas in the creativity-integrated workplace.