• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.3849-3855
• /
• 2011

This study presents an efficient strategy for selecting portfolio by evaluating growth potential of a corporation based on dividend. Through preliminary experiments, we extract 4 categories to sort out prospective stocks and develop a scoring table including criteria and formulas used to calculate scores for each category. In order to show the effectiveness of the portfolio selected by scoring table, we constructed 3 portfolios for every 4 years (2007-2010) out of 927 listed companies in KRX and proved that our portfolios are superior to market portfolio in terms of rate of return.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.113-120
• /
• 2023

Occupational safety and health management expenses in the construction industry are statutory and separately included in the cost statement to prevent occupational accidents and health problems. The expenses are determined by multiplying the standard amount by the rate decided according to construction types and scales. However, the current expense appropriation method does not properly reflect the recent changes in the construction industry such as industry size, industry diversification, and social atmosphere about safety reinforcement. This study surveyed 1579 questionnaires in total and analyzed expense execution rate and proportion of each expense category. The expense execution rate was relative higher in complex construction (e.g., heavy construction = 126%, civil engineering = 125%) and long-period project (equal to or over 48 months construction = 133%) compared to general construction (98~116%) and short-period project (less than 48 months construction = 115%). The proportion of spending expenses was higher in the category of safety manager labor costs (25~52%), safety facility costs (22~40%), and personal protective equipment costs (10~25%). The analysis results of the study can be utilized in revising the standard expense appropriation method by reflecting the current usages of the occupational safety and health management expenses in the construction industry.

• Journal of Korean Society on Water Environment
• /
• v.26 no.2
• /
• pp.191-199
• /
• 2010

Introduction of Technology-Based Effluent Limitations (TBELs) concepts into Korea requires extensive and through analyses on the expected pollutants reduction effects and the cost factor for the industry side. In addition, the TEBLs should be optimized for the regulatory environments of Korea and be applied in a progressive manner to minimize the undesirable effects. It is also necessary to assess the contribution of each industrial categories's to the pollution of natural water bodies to find the priority of TEBLs application. For these purposes, the pollution loads of various industrial categories were analyzed using risk assessment indicator based on Toxic Weighting Factors (TWFs). First, the TWFs were calculated for the pollutants regulated using the method adopted by USEPA. And the effluent characteristics of the eighty two categories of industry in Korea were investigated. Although the analytical data on the wastewater from different industrial categories are relatively limited, the results from two previous studies were used. The first study, conducted by the National Institute of Environmental Research in 2001~2004, investigated the wastewater characteristics from 255 industrial sources covering the major 20 industrial categories. The second study includes more recent analytical data for the wastewater from 500 industrial sources, covering all the 82 industrial categories. In the result of the pollution loads analyses, the category of 'Synthetic and Chemical manufacture' was found to show the highest raw pollution load. On the other hand the category of 'Ion & Steel manufacture' was found to show the highest effluent pollution loads, which can be considered as the real impacts on natural water streams. The top five categories occupied 62.2% of the total effluent pollution loads. Through the analyses, the relative importances of each industrial categories and the priorities of TEBL-based pollution reduction were determined.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.3 s.54
• /
• pp.471-482
• /
• 1996

Early recognition of coalescence in pneumoconiotic lesions is important because such coalescence is associated with the respiratory symptoms and deterioration of lung function. This complicated form of pneumoconiosis also has worse prognosis than does simple pneumoconiosis. High resolution computerized tomography(HRCT) provides significant additional information on the stage of the pneumoconiosis because it easily detects coalescence of nodules and emphysema that may not be apparent on the simple radiograph. The purpose of this study is to clarify the role of HRCT in detection of large opacity and the relationship of change between the coalescence of nodules or emphysema and lung function in dust exposed workers. 1. There was good correlation between the HRCT grade of pneumoconiosis and ILO category of profusion. 5(9.09%) in 55 study population had confluent nodule extending eve, two o, more cuts on HRCT. HRCT could identify the pneumoconiotic nodules which was not found by simple radiogrphy in 6 workers with category 0/0. 2. No significant difference was observed coalescence of nodules and emphysema by dust type. 3. There was no significant difference in pulmonary function according to ILO and HRCT classification. 4. HRCT could detect the significant reduction in $FEV_1,\;FEV_1/FVC$, PEFR, $FEF_{25},\;FEF_{50},\;and\;FEF_{75}$ and remarkable increase in RV and TLC in study persons with emphysema compared with non-emphysema group. 5. Emphysema was found more often in nodules-coalescence group than small opacity group by HRCT. We found that HRCT could easily detect areas of coalescence and complicated emphysema compared to plain chest X-ray. Also our data suggest that it is primarily the degree of emphysema rather than the degree of pneumoconiosis that determines the level of pulmonary function.

• Journal of the Korea Society for Simulation
• /
• v.3 no.2
• /
• pp.57-67
• /
• 1994

For many practical and industrial optimization problems where some or all of the system components are stochastic, the objective functions cannot be represented analytically. Therefore, modeling by computer simulation is one of the most effective means of studying such complex systems. In this paper, with discussion of simulation optimization techniques, a case study in machining process for application of simulation optimization is presented. Most of optimization techniques can be classified as single-or multiple-response techniques. The optimization of single-response category, these strategies are gradient based search methods, stochastic approximate method, response surface method, and heuristic search methods. In the multiple-response category, there are basically five distinct strategies for treating the responses and finding the optimum solution. These strategies are graphical method, direct search method, constrained optimization, unconstrained optimization, and goal programming methods. The choice of the procedure to employ in simulation optimization depends on the analyst and the problem to be solved.

• Journal of Environmental Health Sciences
• /
• v.49 no.6
• /
• pp.312-323
• /
• 2023

Background: Environmental concentrations of substances can be estimated by K-CHESAR based on main, industrial, and use categories (MC/IC/UC) and ECETOC TRA based on environmental or specific environmental categories (ERC or spERC). Objectives: Three different systems for estimating environmental concentrations were compared to figure out their order with possible reasons along with relationship of regional predicted environmental concentrations (PEC_regional) and final PEC_local for various uses of a substance. Methods: Typical uses of the case substance and their corresponding ERCs were selected from the webpage of the European Chemical Agency. Proper MC/IC/UC and spERC were assigned to each ERC. Emission fractions were compared for each assessment code from the available database. PECs were calculated by three estimating systems: K-CHESAR using MC/IC/UC, ECETOC TRA using ERC, and ECETOC TRA using spERC with their default values for input parameters. Percentage of PEC_regional to PEC_local were manually calculated for each use. Results: Emission factors decreased in the order of ERC > MC/IC/UC > spERC. Values of the final PEC_local derived as sum of PEC_regional and Clocal decreased in the order of calculations using ECETOC TRA-ERC>KCHESAR with MC/IC/UC>ECETOC TRA-spERC for all environmental media. Percentages of PEC_{regional,water} to PEC_local,water ranged from 0 to 10.3% in industrial uses calculated with MC/IC/UC and ERC but 96.3 to 100% in wide dispersive uses of ERC and spERC where values of C_local,water are estimated to be very low. Conclusions: ECETOC TRA generated the most refined PNEC values with spERC and the least with ERC, while K-CHESAR with MC/IC/UC generated values between the two results. The ratio of PEC_regional to PEC_local can be a good measure for performing suitable estimation of PNECs according to use.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.1
• /
• pp.1-19
• /
• 2016

Recently, the emergence of smartphone foster the technological convergence. This convergence no longer takes place within technologies only. Rather, convergence phenomena happen as a form of embodied services. However, previous research on convergence has been subject to the technology-oriented studies, including suggesting patent-based indexes or analyzing technological characteristics. However, investigating technology-service convergence is critical since most of new smart services are technology-based convergence services. Therefore, we analyze the pattern of technology-service convergence which occurs in the smartphone application services. We divided the smatphone application services into four categories, and employ a network analysis to represent the convergence phenomena of each category. Our study is expected to provide meaningful implication in new service development practice.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.45-52
• /
• 2009

The objective of this was to improve a transportation cost relation between Central Distribution Centers(CDCs) and Regional Distribution Centers(RDCs), to control inventory cost concerning safety stock for each service level, by reviewing distribution steps connecting CDCs and RDCs under the price discount. It was also to examine and compare operating costs for the following two alternative suggestions for setting the service standard as a counter measure for a stock-out of the distribution network system management. First, provision by dispersing the safety stock to the CDCs and RDCs; and second, exclusive provision of the safety stock only to the RDCs. The cost comparison analysis was made for each category of purchase costs, regular transportation costs, express transportation costs, and inventory holding costs.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.147-159
• /
• 2000

The NIOSH health hazard evaluation program (HHE program) was created in response to the mandate to determine the toxic effect and potential health hazard of workplace exposure, which is found in Occupational Safety and Health Act of 1970 and the Federal Mine Safety and Health Act of 1977, A primary benefit of HHE program is its ability to provide current health hazard data to employers and employees, which assists them in identifying solutions to occupational health and safety problems in their workplaces, The HHE program also stimulates research in the development and review of sampling methods and diagnostic tests and may prompt additional exposure assesment efforts and toxicological and epidemiological studies. HHE projects also provide human exposure-toxicity data that are used to asses the validity of existing occupational health standards and to support criteria for new standards of recommendation, The HHE request is classified into four categories: 1) category 1: As a administratively invalid, 2) category 2: These are valid requests for which a site visit is not essential to an appropriate response, 3) Category 3 : These are valid requests for which a site visit is necessary for an adequate evaluation, 4) These are valid request which present a complex problem or an opportunity for research, To carry out HHE program one or methods of investigation might be used: 1) direct observation and evaluation of production processes and employee work practices 2) employees exposure level and air contamination level 3) medical test or physical examinations of employees 4) private, confidential interviews with employees 5) review of employer's record of injuries and illness, employee exposure data, medical tests and job histories. After investigation and analysing the data, NIOSH issues a final report, giving finding and recommendation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.1
• /
• pp.8-15
• /
• 1991

In order to visualize the distribution of workplace of which mixed solvent level in air exceeded the TLV of 1.0 (ACGIH), 17 thinners used in 44 painting workplaces were analysed with gas chromatography, and their levels in air were compaired with. 1. For detection rate of solvents in thinner was highest in case of toluene (76.4%), and decreased in orders of xylene (70.6%), methylisobutyl ketone (35.3%), acetone (35.3%), methyl ethyl ketone (23.5%), isopropylacohol (17.6%), n-hexane (17.6%), styrene (11.8%), and ethylacetate (11.8%). Average number of solvents detected was 3.0. 2. Detection rates of organic solvent by component category was highest in cases of aromatic hydrocarbons (52.9%), and decreased in orders of ketones (31.4%), alcohols (5.9%), n-hexane (5.9%) and esters (3.9%). The rate by regulatory category, the second category component was detected in 93.9% of total. 3. There was significant correlation (r=0.929, p<0.01)between detection rates of solvents in thinner and in air. 4. Among the total of 44 painting workplace, the rate of them of which level of mixed solvents in air was exceeded was highest in case of aromatic hydrocarbons (29.5%), and decreased in orders of ketones (6.8%), alcohol (2.3%), n-hexane (2.3%), and was highest in guitar painting (71.4%) workplace in case of aromatic hydrocarbons by component category.