• 대한예방한의학회지
• /
• 제4권1호
• /
• pp.81-90
• /
• 2000

This study was conducted to investigate the antitoxic component in methanol extract of Houttuynia cordata $T_{HUNB}$. The results were as follows: Generally, detoxication effects by Houttuynia cordata $T_{HUNB}$ methanol extract increased in proportion to the methanol extract concentrations. When 40 mg/kg dosage of Houttuynia cordata $T_{HUNB}$ methanol extract was administrated, it showed the highest antitoxic effects in metallothionein induction. After the methanol extract treatment. Body weights increased in proportion to methanol extract concentrations. However, after 3 weeks, the body weight decreased insignificantly. From the above results, these results suggest that the methanol extract of Houttuynia cordata $T_{HUNB}$ increased metallothionein concentration and decreased the toxicity of cadmium in rats.

• Elastomers and Composites
• /
• 제22권1호
• /
• pp.11-19
• /
• 1987

A coil pyrolyzer and processor-controlled gas chromatograph were used for analysis of rubber for compounding ratio of the single and blend rubber vlucanizates. Variables such as sample size, pyrolysis temperature, time allowed for pyrolysis, the column packing material, its length and programmable temperature for gas chromatography were examined to obtain optimum condition for application to NR, BR and SBR blends. By application fixed conditions, three kinds of standard curves were finally obtained from thirty samples of blend vulcanizates which were prepared in the pilot plant, NIRI. It is possible to determine rubber composition and their ratio in NR, BR and SBR products by pyrolysis.

• 청정기술
• /
• 제9권3호
• /
• pp.145-151
• /
• 2003

청정생산방법론을 적용하여 염료생산공정의 청정화를 꾀하고자 하였다. 본 고에서는 반응중에 사용되는 공정수와 유기용매인 DMF의 회수방안을 모색하고, 고급산성염료 제조공정 보완을 통한 제품질 향상 방안을 마련하고자 하였다. 청정생산방법론의 적용순서는 기업경영진의 결정, 대안도출, 대안평가 및 우선순위 결정, 실행, 모니터링 및 지속적 실행단계의 절차를 따라 수행하였으며, 이의 수행결과 DMF의 회수와 함께 용수사용량을 25% 이상 절감할 수 있었으며, 고급산성염료의 경우 2배 이상의 용해도 향상을 통하여 제품의 가치를 상승시킬 수 있었다.

• 대한산업공학회지
• /
• 제27권1호
• /
• pp.1-10
• /
• 2001

In the reverse engineering, surfaces are modeled for new products by interpolating the digitized data points obtained by measuring the existing shapes. However, many measuring or deviation errors are happened during the measuring process. If these errors are ignored, designers could get undesirable results. Therefore, it is important to handle such errors and fairing procedure with the esthetics criteria is needed during surface modeling process. This paper presents algorithms for the fairing of B-spline surfaces. The algorithms are based on automatic repositioning of control points for B-spline surfaces. New positions of the control points are determined by solving a non-linear programming of which the objective functions are derived variously using derived surfaces and constraints are established by distance measures between the original and the modified control points. Changes in surface shapes are analyzed by illustrations of their shapes and continuous plotting of gaussian and mean curvatures.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.805-813
• /
• 2018

본 연구는 사용자군이 사회적 약자임과 동시에 광범위한 규모로 취급되고 있는 장애인보조기기의 바람직한 품질관리체계 모델을 제시하고자 진행되었다. 보조기기는 의료기기법과의 충돌 문제로 인해 독립적인 제품군으로 분류할 수 없고 법적 기반이 미비하여 독자적인 품질관리 체계를 가지지 못한다. 품목 별로 필요할 때마다 기존의 여타 품질관리 체계에 선별적으로 편입시켜 문제를 해결해왔다. 외국의 사례에서도 독자적인 품질관리 제도는 발견할 수 없었다. 이러한 문제를 합리적으로 극복하기 위해 보조기기를 기존의 품질관리 체계를 반영하는 방법으로 분류할 것을 제안하였다. 해당 분류마다 적절한 품질관리 방법들을 공식화하여 이해가 용이하고 예측가능한 행정이 되도록 고려하였다. 치밀한 품질관리를 위한 행정 과정도 제안하여 보조기기임에도 안전품질관리 체제에 누락되는 일이 없도록 하였다. 이 개선안 제안은 보조기기의 정체성 확립을 통해 보조기기 품질관리의 사각지대를 해결하여 장애인 등의 사용자에게 제품의 안전과 기본적인 기능을 제공하고 더 나아가 해당 산업을 활성화 시키는 단초가 될 수 있을 것이다.

• 펄프종이기술
• /
• 제45권1호
• /
• pp.75-82
• /
• 2013

The traditional Hanji-making was confronted with lots of industrial disadvantages and economic problems, due to the original hand-made process. Recently, the studies on the automation of overall Hanji manufacturing process is carried out by applying the commercial chemical pulping method in order to expand industrial application or efficiency of non-wood fibrous materials. However, the application of commercial pulping methods to the bast tissues of paper mulberry leads to the chemical and mechanical deterioration of cellulosic fibers. In this study, the optimal cooking method using the bast parts of paper mulberry produced by an auto-scraping device was applied to minimize the damage of fiber strength for the paper yarn manufacture. The pre-steaming treatment and alkaline pulping systems were evaluated in removal efficiency of lignin and pectin materials within the bast tissue of paper mulberry. With the application of pre-steaming treatment and 2 stage pulping system using potassium carbonate and then sodium hydroxide, kappa values were decreased two times more in lignin removal than the single stage of pulping method. It was also identified from SEM images and ATR-FTIR spectra that the pectin components within cellular structure of bast tissue were easily removed and the debarked bast parts by a auto-scraping device were easily defiberized by 2-stage pulping sequence using potassium carbonate/sodium hydroxide pulping system.

• 한국세라믹학회지
• /
• 제36권1호
• /
• pp.1-6
• /
• 1999

천연원료인 pink A급의 합천 kaolin에 산업부산물인 Al(OH)3와 boehmite를 각각 첨가하여 mullite를 합성하였다. 혼합방법으로는 분쇄와 혼합효과를 동시에 얻을 수 있는 attrition milling법을 행하였고 1.5 ton/$\textrm{cm}^2$으로 일측가압성형하여 시편을 제조, 열처리하였다. Al(OH)3 부산물을 첨가하였을 경우 Al2O3 함량이 71.8 wt%인 시편을 1$600^{\circ}C$에서 4시간 열처리하여 223MPa의 꺽임강도값을 얻었고 10시간 열처리하여 85%의 mullite가 생성되었다. boehmite를 첨가하였을 경우 1$600^{\circ}C$에서 10시간 열처리하였을 때 Al2O3 함량이 68wt%인 시편의 경우 147MPa의 꺽임강도값을 얻었고 Al2O3 함량이 71.8 wt%의 시편의 경우 95%의 고순도 mullite를 합성할 수 있었다.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.485-490
• /
• 2002

Demands of customers are being changed and varied. And in this circumstance, it become a main issue of management that the company should produce and sell products according to the customer demands. With these trends, each company has been concentrating effects on generalization of product development technique and distinction of service for customer. To fulfill these demands of customer, they need a concept of eCRM(Web based Customer Relationship Management), and go from soiling products and services, or gathering customer requests, up to the phase of solving customer's problem by real time or previous action. With the help of internet, the frequency and speed of the problem solving has improved greatly. In the Supply chain, The ATP(Available to Promise) function doesn't only give customers to conformation of delivery. It can be used by the core function with ATP rule that can reconcile supplies and demands on the supply chain. Therefore We can be acquire the conformation about on the due date of supplier by using the ATP function of management about real and concurrent access on the supply chain, also decide the affect about product availability due to forecasting or customer's orders through the ATP. In this paper, It consolidates the necessity on a ATP and analyzes data which is concerned of ATP. Under the these environments, defines the ATP rule that can improve the customer value and data flow related the eCRM and builds on a algorithm.

• 한국주조공학회지
• /
• 제31권2호
• /
• pp.60-65
• /
• 2011

Molten magnesium alloys and magnesium products are easily oxidized and burned when they are exposed to high temperature for manufacturing process and by accident. In order to solve these problems, CaO addition in magnesium alloys has been developed. The ignition resistance of CaO added Mg-3Al, Mg-6Al, and Mg-9Al Eco-Mg alloys were investigated in comparison with those of magnesium alloys without CaO. The ignition resistance was examined by three methods : DTA, furnace chip ignition test, and torch ignition test. DTA was carried out for obtaining quantitative ignition temperature data with respect to specimen geometry and test environment; the furnace ignition test for burr and chip ignition temperature data; and the torch test for ignition temperature data for manufactured products. The ignition resistance of magnesium alloys under all conditions greatly increased by CaO addition.

• 산업기술연구
• /
• 제28권B호
• /
• pp.47-52
• /
• 2008

In this study, GAC adsorption, ozonation and $O_3/GAC$ hybrid processes were investigated for treatment of humic acid. The degradation characteristics and efficiencies of humic acid in each process were evaluated through pH variation, $UV_{254}$ decrease, DOC removal, change of molecular size distribution and by-products formation. DOC removal rate in $O_3/GAC$ hybrid process (80%) was higher than arithmetic sum of ozonation (38%) and GAC adsorption process (19%) by synergism. $UV_{254}$ decrease rate of humic acid was also the highest than any other processes when treated in $O_3/GAC$ hybrid process. Molecular size distribution was not significantly changed in the GAC adsorption process. Main distribution of molecular size of humic acid was converted from 3 k~30 kDa into 0.5 k~3 kDa in ozonation. But the most of large molecular sizes of humic acid converted into small molecules(smaller than 0.5 kDa) in $O_3/GAC$ hybrid process. Quantities of formaldehyde and glyoxal formed in $O_3/GAC$ hybrid process were less than the ones in ozonation.