• Industrial Engineering and Management Systems
• /
• v.13 no.4
• /
• pp.383-397
• /
• 2014

Reverse logistics network design issues have been popularly discussed in recent years. However, few papers in the past literature have been dedicated to incentive effect on return quantity of used products. The purpose of this study is to formulate a dynamic nonlinear programming model of reverse logistics network design with the aim of managing the used products allocation by coordinating the collection centers and recovery facilities to warrant economic efficiency. In the optimization model, a fuzzy approach is applied to interpret the relationship between the rate of return and the suggested incentives. Due to funding constraints in setting up the collection centers, this work considers these centers as multi-capacity levels, which can be opened or closed at different periods. In view of the fact that the problem is known as NP-hard, we propose a heuristic method based on tabu search procedure to solve the presented model. Finally, several dominance properties of optimal solutions are demonstrated in comparison with the results of a state-of-the-art commercial solver.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.1
• /
• pp.29-36
• /
• 2011

This study analyzed the convenience and productivity before and after adopting self-propelled power transportation devices to the harvest and transportation of fruit and vegetable products in the Gyeongbuk region, by applying the REBA and RULA techniques. In the REBA analysis, the work risk was low with 4~6 points before adoption which became 2~3 points after adoption. As for the RULA analysis, work loading appeared to have decreased with 6~7 points before adoption which became 3~4 points after adoption. The annual work time reduction was about 48~179 hours while labor costs were reduced to 364~1,345 thousand won annually. This indicated a labor cost reduction effect of about 10~15%. Therefore, the adopted self-propelled power transportation devices appeared to prevent musculo skeletal diseases of the human body and also improve productivity even after using it for long hours according to the REBA, RULA measures level.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.142-149
• /
• 2020

A manufacturing company should produce its products and make a profit to continue its management. With the adoption of a multi-category small-volume production system, manufacturers that produce concrete pump-cine products are carrying out improvement activities to increase their market share amid the business-to-customer business environment. However, the slump in the construction investment environment has led to a decline in sales of concrete pump trucks. The purpose of holding inventory is to prevent loss of sales opportunities with the rate of change in the sales plan, and reducing the rate of change in the product can reduce unnecessary inventory and, in order to realize this, the goal of reducing inventory can be achieved by reviewing the parts that can be designed for common use. Therefore, to reduce the inventory of concrete pump trucks, semi-finished publicization design is necessary. According to the analysis, the frame assembly process of the 32M model is common. Production capacity can be secured without loss of sales opportunity.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.149-158
• /
• 2015

The purpose of this paper is to investigate the determinants of new product diffusion. We seek to document and explain systematic features of product diffusion. In this essay, we examine the well-documented empirical regularity that the speed of diffusion has accelerated during the twentieth century. The empirical results show that the main source of acceleration are faster declines in prices. Faster price declines make the product affordable to more consumers within a given period of time. Based on theories of intertemporal price discrimination and learning-by-doing, the association between the speed of adoption and the speed of price decline was explained. Faster price declines are attributed to several product characteristics as well as changes in income distribution. Above all, the introduction of consumer electronic products in more recent years can be regarded as the most important factor in accelerating price declines. Consumer electronic products are technologically different from non-electronic goods, in that semiconductors are important components. As the price of semiconductors has dropped rapidly, the falling production costs can be rapidly incorporated to the price of consumer electronic goods. Furthermore, most of the recently introduced consumer electronic products have network externalities, and many products with network externalities require complementary products. A complementary product becomes more readily or cheaply available as more people have the main product. One major difference between previous studies and this study is that the former focuses only on the factors that operate directly on the speed of adoption, while this study incorporated factors that work through price changes as well as the factors that work directly on the speed of adoption.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.1
• /
• pp.20-25
• /
• 2012

Objectives: Hazard identification is the most important step in occupational health monitoring at the workplace. This paper reviewed the several related stuffs to the hazard identification in the semiconductor industry. Methods: I checked the MSDS system, chemical toxic informations, trade secrets and by-products by experience and the literature used in semiconductor industry. Results: I found and experienced as follows; (1) There are a few inventory and history of chemicals used in workplace. Toxic information of chemicals to be available is very limited. (2) There are many trade secrets in MSDS for chemical mixtures. It is difficult to identify the accurate information from MSDS. (3) By-products is necessary to identify that they will produce in workplace. Conclusions: It is necessary to regulate the obligations of employers which check the inventory and history of chemicals used in workplace. It is necessary to amend the trade secrets in MSDS system.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.369-374
• /
• 2004

Calcium sulfoalumiante(CSA) was prepared for using natural calcite($CaCO_3$) and industrial by-products and wastes, such as $Al(OH)_3,\;CaSO_4{\cdot}2H_2O$. The mixture of raw materials was fired at 20, 400, 600, $1200^{\circ}C$ for 1h and cooled rapidly in air. The cement replaced by 10 wt% $C_4A_3S$ expansive additives was investigated by the measurement of the hydration products and compressive strength, setting time, expansion at wet curing condition. $C_4A_3S$ was found in x-ray diffraction pattern over the temperature $1200^{\circ}C$. The setting time or the cement pastes added clinkers fired at different temperature was shorter than ordinary portland cement. The compressive strength was higher than the ordinary portland cement about 20~30%. The mainly hydration products were ettringite, and $Ca(OH)_2$. The expansion due to the formation of ettringite during hydration decreased the drying shrinkage of hardened cement rather than the ordinary portland cement.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.84-95
• /
• 1990

The objective of this study is to understand the effect of measurement-related investment. That is, this study aims at verifying the correlation between the measurement-related investment and inferiority rate of products by statistical analysis. The samples of this study are 376 industrial companies in Korea, and the research data was analysed on inferiority state of industrial companies with a measurement standard laboratory. The analysis was made by the elementary statistics, the correlation analysis and the regression analysis. The results are summarized as follows : First, the inferioriy rate of the industrial companies with a measurement standard laboratory was relatively lower than that of the other companies without the laboratory by statistical significance. Second, the increment on measurement-related investment had a negative correlation with the increment of inferiority rate, and the increase of measurement-related investment showed decrease of the inferiority rate by regression analysis.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.2
• /
• pp.74-80
• /
• 2013

In this study, a novel and flexible recommender system was developed, based on product taxonomy and usage patterns of users. The proposed system consists of the following four steps : (i) estimation of the product-preference matrix, (ii) construction of the product-preference matrix, (iii) estimation of the popularity and similarity levels for sought-after products, and (iv) recommendation of a products for the user. The product-preference matrix for each user is estimated through a linear combination of clicks, basket placements, and purchase statuses. Then the preference matrix of a particular genre is constructed by computing the ratios of the number of clicks, basket placements, and purchases of a product with respect to the total. The popularity and similarity levels of a user's clicked product are estimated with an entropy index. Based on this information, collaborative and content-based filtering is used to recommend a product to the user. To assess the effectiveness of the proposed approach, an empirical study was conducted by constructing an experimental e-commerce site. Our results clearly showed that the proposed hybrid method is superior to conventional methods.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.985-989
• /
• 1998

In this study, removal efficiencies of pesticides on apples and peppers with water, dishwashing detergent, and alcoholic disinfectant were investigated by Gas Chromatography. Different conditions of pretreatment for increase of pesticide recovery were investigated for optimum condition. In our experiment, the supelco-STB-608 column and electron capture detector(ECD) were used to analyze pesticides residue. Removal efficiency of pesticide was in the order of alcoholic disinfectant>dishwashing detergent>water.

• The Journal of Fisheries Business Administration
• /
• v.40 no.3
• /
• pp.1-28
• /
• 2009

In recent, the Korean fisheries industry face an overall crisis. Annual fish catch is continuously decreasing for last two decades even though various programs to improve fish population. Moreover, domestic fish market is more and more occupied by imported cheap fish products from abroad due to the consequence of open economic policy, FTA and WTO/DDA entente. Under the circumstances, this study aims to examine the potential for building fisheries cluster as a policy tool to promote fisheries and fisheries-associated industries in Korea. To achieve this goal, the authors firstly reviewed the theoretical concept of Industrial Cluster in the evolutionary economics point of view, secondly, analyzed the main components of Porterian Cluster(or innovation cluster), thirdly, derived the key reasons to induce the improvement of productivity within the cluster network system and lastly evaluated fisheries capability and industrial infrastructures of each province as a basic condition to build a fisheries cluster. The result of the study demonstrates the voluntary accumulation of fish products and processing techniques in Korea, however, it is not enough to make up a Porterian innovation. Therefore, the present is most opportune for applying fisheries cluster as a strategic policy tool. Government supports to establish innovation cluster for fisheries may contribute both fisheries industry and local economy by developing the latent capacity of fisheries and helping concentrate innovation capabilities.