• 한국정밀공학회지
• /
• 제23권10호
• /
• pp.74-79
• /
• 2006

In this study, the tempering effect on the wear characteristics of induction-hardened SPS5 steel was investigated. For this purpose, three tempering conditions were applied to control the hardness of heat-treated SPS5 steel. Ball-on-disk wear tests have been performed using zircornia balls on the tempered specimens to determine the variation of wear characteristics. The results showed that friction coefficient decreased with increasing hardness for induction hardening conditions. This seems to occur because real contact area between specimen and mating ball was affected by the specimen hardness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.260-262
• /
• 2006

This paper presents Hybrid-PI controller of induction motor drive using fuzzy control. In general, PI controller in computer numerically controlled machine process fixed gain. They may perform well under some operating conditions, but not all. To increase the robustness, fixed gain PI controller, Hybrid-PI controller proposes a new method based self tuning PI controller. Hybrid-PI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of induction motor are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.409-410
• /
• 2006

In this study, the tempering effect on the wear characteristics of induction-hardened SPS5 steel was investigated. For this purpose, three tempering conditions were applied to control the hardness of heat-treated SPS5 steel. Ball-on-disk wear tests have been performed using zircornia balls on the tempered specimens to determine the variation of wear characteristics. The results showed that friction coefficient decreased with increasing hardness for induction hardening conditions. This seems to occur because real contact area between specimen and mating ball was affected by the specimen hardness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.779-780
• /
• 2006

This paper describes the effects of rotor-bar broken in induction machines. The analysis has been made on 7.5kW, 4P, 1,768[rpm], three-phase induction motors in a healthy and broken-rotor bars fault conditions at rated loading conditions. The effects of the rotor-bar broken, magnetic force are investigated by finite element method (FEM) and experiment. The results can be useful for real-time on-line monitoring of an induction motor.

• 한국미생물·생명공학회지
• /
• 제19권3호
• /
• pp.281-289
• /
• 1991

Neurospora crassa는 성장이 끝나고 분화되는 과정에서 tyrosinase를 생산하며 아미노산류의 기질유사체, 반대사물질, 단백질 생합성 저해제 등에 의해 효소생산이 유도된다. 미생물 균체를 배양시키며 여러가지 유도물질을 사용하여 효소의 생합성을 유도시킨 결과 가장 적합한 유도물질은 cycloheximide였다. 이는 균체의 성장을 크게 저해하는 항생제의 일종이므로 효소 생합성을 최대화시키기 위한 최적의 농도가 존재하였으며, 유도물질의 농도가 일정한 경우에 효소 생산에 최적인 유도시간이 존재하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권8호
• /
• pp.395-401
• /
• 2005

This paper presents Hybrid PI(HBPI) controller of induction motor drive using fuzzy control. In general, PI controllers used in computer numerically controlled machines process fixed gain. They may perform well under some operating conditions, but not all. To increase the robustness of fixed gain PI controller, HBPI controller proposes a new method based self tuning PI controller. HBPI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of induction motor are presented to show the effectiveness of the proposed gam tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.64-70
• /
• 2005

In this literature, fault detection and classification of faulty induction motors are carried out through Z-index and frequency analysis. Above frequency analysis refer Fourier transformation and Wavelet transformation. Z-index is defined as the similar form of energy function, also the faulty and healthy conditions are classified through Z-index. For the detection and classification feature extraction for the fault detection of an induction motor is carried out using the information from stator current. Fourier and Wavelet transforms are applied to detect the characteristics under the healthy and various faulty conditions. We can obtain feature vectors from two transformations, and the results illustrate that the feature vectors are complementary each other.

• 대한금속재료학회지
• /
• 제48권2호
• /
• pp.141-147
• /
• 2010

An Ni-Al intermetallic coating has been produced by induction heating on mild steel. The effect of the induction heating conditions on the microstructure of the coating has been investigated. The reaction synthesis of the intermetallic compounds was promoted while increasing the heating rate and the holding time at reaction temperature. Especially, an NiAl phase corresponding to the initial composition of mixed powder was predominantly formed. However, the synthesis at low reaction temperatures occurred by solid state diffusion during the holding time and an Fe-Al reaction layer was formed at the interface with the substrate, regardless of the heating rate. The combustion synthesis of the intermetallic compound occurred at a temperature higher than 1023 K and resulted in an almost single phase NiAl structure.

• Journal of Plant Biotechnology
• /
• 제3권3호
• /
• pp.141-144
• /
• 2001

To enhance the shoot induction efficiency from nodal stem of yooza, the culture conditions such as basal medium, carbohydrate source, solidifying agent and the optimum concentration of plant growth regulators for shoot induction were investigated. The nodal explants were cultured better on MS medium than on MT, SH, B5 or W media in considering of shoot induction rate and mean shoot length. Solidifying agent in medium was better with 0.8% agar than with 0.3% agar, 1.2% agarose or 0.2% gelrite. Carbohydrate source in shoot induction medium was efficient with 30 g/L sucrose. The optimum concentrations of plant growth regulators were determined that 0.1 mg/L NAA as auxin was effective on the shoot induction, and 1.0 mg/L BAP as cytokinin induced multiple shoots efficiently. Shoot induction was the most effective on MS medium supplemented with 4 mg/L $GA_3$ in yooza.

• 미생물학회지
• /
• 제38권1호
• /
• pp.54-56
• /
• 2002

Induction of laccase isozymes under acidic stresses were determined in Trametes versicolor, Pleurotus ostreatus and Ganoderma lucidum isolated in Korea, and in Lentinus squarrosulrs isolated in Thai. When cultures of these fungi were transferred to acidic liquid media (pH 3.0-4.0), the activities of secreted extralcellular laccases were increased 60% and 400% in T. versicolor and G. lucidum respectively. However, there was no such induction in L. squarrosulus or P. ostreatus. In L. squarrosulus, different laccase isozymes in the electrophoretic mobilities were induced under acidic conditions.