• Corrosion Science and Technology
• /
• 제18권6호
• /
• pp.300-311
• /
• 2019

The corrosion behaviors of twinning-induced plasticity (TWIP) steels with different alloying elements (Cu, Al, Si) in a neutral aqueous environment were investigated in terms of the characteristics of the corrosion products formed on the steel surface. The corrosion behavior was evaluated by measuring potentiodynamic polarization test and electrochemical impedance spectroscopy. For compositional analysis of the corrosion products formed on the steel surface, an electron probe x-ray micro analyzer was also utilized. This study showed that the addition of Cu to the steel contributed to the increase in corrosion resistance to a certain extent by the presence of metallic Cu in discontinuous form at the oxide/steel interface. Compared to the case of steel with Cu, the Al-bearing specimen exhibited much higher polarization resistance and lower corrosion current by the formation of a thin Al-enriched oxide layer. On the other hand, Si addition (3.0 wt%) to the steel led to an increase in grain size, which was twice as large as that of the other specimens, resulting in a deterioration of the corrosion resistance. This was closely associated with the localized corrosion attacks along the grain boundaries by the formation of a galvanic couple with a large cathode-small anode.

• BMB Reports
• /
• 제35권5호
• /
• pp.482-487
• /
• 2002

Early activation of human peripheral blood polymorphonuclear neutrophils is characterized by their morphological changes from spherical to polarized shapes. The endotoxins from enteric pathogens (S. dysenteriae type 1, V. cholerae Inaba 569B, S. typhimurium, and K. pneumoniae) were assessed by their ability to induce morphological polarization of the neutrophils as measures of early activation. Phagocytic activity, adhesion, chemokinetic locomotion, and nitroblue tetrazolium (NBT) dye-reduction ability measured the later activation of the cells. Neutrophils showed distinct morphological polarization in suspension over a wide range of concentrations of these endotoxins when were compared with those that were induced by the standard chemotactic factor, N-formyl-L-methionyl-L-leucyl-L-phenylalanine (FMLP). It was discovered that all of the endotoxins induced locomotor responses in neutrophils in suspension that were dose- and time-dependent. The optimum concentration for the endotoxins of S. dysenteriae, V. cholerae, and K. pneumoniae was 1 mg/ml in which 71, 69, and 66% of the neutrophils were polarized. However, the S. typhimurium dose was 2 mg/ml in which 50% of the cells responded. Neutrophils that were stimulated with endotoxins also showed increased random locomotion (p<0.005) through cellulose nitrate filters, but an enhanced adhesion of the cells to glass surfaces (p<0.03). These are important functions of these cells to reach and phagocytose damaged cells, as well as invading microorganisms. Interestingly, the endotoxins had a highly-significant inhibitory effect upon the proportions of neutrophils phagocytosing opsonized yeast (p<0.01) with a small number of yeast that were engulfed by the cells (p<0.02). Further, endotoxin-treated cells showed an enhanced ability to reduce NBT dye (p<0.03). Therefore, we concluded that endotoxins of enteric pathogens are neutrophil chemotactic factors.

• 한국전기전자재료학회논문지
• /
• 제37권1호
• /
• pp.48-55
• /
• 2024

The changes in threshold voltage and DIBL were investigated for changes in remanent polarization P_r and coercive field E_c, which determine the characteristics of the P-E hysteresis curve of ferroelectric in NCFET (negative capacitance FET). The threshold voltage and DIBL (drain-induced barrier lowering) were observed for a junctionless double gate MOSFET using a gate oxide structure of MFMIS (metal-ferroelectric-metal-insulator-semiconductor). To obtain the threshold voltage, series-type potential distribution and second derivative method were used. As a result, it can be seen that the threshold voltage increases when P_r decreases and E_c increases, and the threshold voltage is also maintained constant when the P_r/E_c is constant. However, as the drain voltage increases, the threshold voltage changes significantly according to P_r/E_c, so the DIBL greatly changes for P_r/E_c. In other words, when P_r/E_c=15 pF/cm, DIBL showed a negative value regardless of the channel length under the conditions of ferroelectric thickness of 10 nm and SiO₂ thickness of 1 nm. The DIBL value was in the negative or positive range for the channel length when the P_r/E_c is 25 pF/cm or more under the same conditions, so the condition of DIBL=0 could be obtained. As such, the optimal condition to reduce short channel effects can be obtained since the threshold voltage and DIBL can be adjusted according to the device dimension of NCFET and the P_r and E_c of ferroelectric.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.383-389
• /
• 2003

Clay minerals show a distinct induced-polarization phenomenon, which is one of the most important factors for predicting groundwater flow and contaminant transport. This paper presents a step-by-step process to estimate Cole-Cole parameters from spectral induced-polarization (IP) data measured on the surface of three-dimensional earth. First, the inversion of low-frequency resistivity survey data is made to identify the dc resistivity ${\rho}_dc$ of a volume having IP effects. The other parameters, chargeability m, time constant $\tau$, and frequency dependence c, are sought for the polarizable volume. Next, using multi-frequency data, c can be obtained as high or low asymptotes of the slope of log phase vs. log frequency. Further, for low m, intrinsic $\tau$ is approximated by apparent one, ${\tau}_a$, which is derived from the relation ${{\omega}{\tau}}_a$=1 at an angular frequency $\omega$, where the imaginary component of spectral IP data has an extreme value. Finally, to obtain intrinsic m a two-step linearized procedure has been derived. For a body of given $\tau$ and c, forward modeling with a progression of m values yields a plot of observed vs. intrinsic imaginary components for a frequency. Since this plot is essentially linear, to extract the intrinsic imaginary component is quite simple with an observed value. Using the plot of intrinsic imaginary component vs. m, intrinsic m is determined. We present a synthetic example to illustrate that the Cole-Cole parameters can be recovered from spectral IP data.

• 자원환경지질
• /
• 제20권3호
• /
• pp.197-201
• /
• 1987

3층 구조 대지의 음수 유도분극 반응을 디지탈 선형 필터법으로 구하여 검토하였다. 음수의 유도분극 반응은 전기비저항 구조가 K니 Q형일 때 나타나며, K형 구조의 경우 Q형보다 더 뚜렷한 음수의 반응을 보여 준다. 이러한 구조일 때, 유도분극 계수는 전기비저항 분포와 전극 배치의 함수로 주어지며, 표층의 계수만이 음수의 값을 가질 수 있다. 따라서 음수의 유도분극 반응은 표층이 분극성일 때 생길 가능성이 있으며, 그 외의 층의 분극성은 오히려 음수의 유도분극 반응을 줄이는 역할을 한다.

• 자원환경지질
• /
• 제16권4호
• /
• pp.269-276
• /
• 1983

단순한 사각주형(四角柱型) 물체(物體)에 대한 3차원 표준곡선을 해석하였다. 이들 표준곡선은 쌍극자배치(雙極子配置)에 대하여 적분방정식을(積分方程式) 이용한 수치계산기술(數値計算技術)로 구하였다. 전도성(電導性) 물체에 대한 IP응답(應答)은 물체의 폭과 두께의 비율에 따라서 그 패턴이 달라진다. 주향(走向)길이가 쌍극자간격(雙極子間隔)의 6배 이상이 되면 2차원의 결과와 유사하다. 또한 주향(走向)길이가 길고, 폭이 쌍극자 간격의 4배이상이 되면 층구조(層構造)(1차원) 해석도 가능하게 된다. 한편, 측선(測線)이 주향방향(走向方向)을 따라서 물체의 중심으로부터 멀어지는 효과는 물체의 깊이가 지표로부터 깊어질 때와 비슷하게 나타난다. 물체가 측선하(測線下)에서 측선과 평행(平行)한 방향으로 이동하더라도 IP패턴에는 거의 영향을 미치지 않는다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2003년도 추계학술대회 발표 논문집
• /
• pp.163-168
• /
• 2003

In the present study, the piezoelectricity and polarization of multilayer ceramic actuator, being designed to stack PMN-PZ-PT ceramic layers and Ag-Pd electrode layers alternatively, were investigated under a consideration of geometric factor, the volume ratio of the ceramic to the electrode layers. The actuators were fabricated by tape casting of $0.2Pb(Mg_{1/3}Nb_{2/3)O_3-0.38PbZrO_3-0,42PbTiO_3$ followed by lamination and burnout & co-firing processes. The actuators of $10\times10\times0.6~2\textrm{mm}^3$ in size were formed in a way that $60 ~ 200\mu\textrm{m}$ thick were stacked alternatively with $5\mu\textrm{m}$ thick electrode layer. Increases in polarization and electric field-induced displacement with thickness of the ceramic layer were attributed to change of $90^{\circ}$/$180^{\circ}$ domain ratio, which was affected by interlayer internal stress. The piezoelectricity and actuation behaviors were found to depend upon the volume ratio (or thickness ratio) of ceramic to electrode layers.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권3호
• /
• pp.39-46
• /
• 2014

Hydraulic conductivity is an important parameter, representing permeable property of the groundwater in aquifers, in the issues of groundwater development, groundwater contamination, and groundwater flow, etc. We estimated a relationship between hydraulic conductivity and electrical properties (formation factor, chargeability, and time constant) of silty sand in the laboratory. For this study, we conducted grain size analysis, constant head permeameter test, and measured electrical resistivity and spectral induced polarization of silty sand samples collected from the riverside alluvium of the Nakdong River in Nogok-ri area, Dasan-myeon, Goryeong-gun in Gyeongbook Province, Korea. In the laboratory test, we used soil samples of approximately uniform porosity with 0.5% error range, and kept the electrical resistivity of pore water with 100 ohm-m. As a result, the relationship between effective particle size and hydraulic conductivity agrees fairly well with the existing empirical formulas. Hydraulic conductivity was correlated with formation factor, chargeability, and time constant: hydraulic conductivity increased with increasing formation factor and time constant as well as with decreasing chargeability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.23.1-23.11
• /
• 2020

Background: 4-Hexylresorcinol (4HR) is able to increase angiogenesis. However, its molecular mechanism in the human endothelial cells has not been clarified. Methods: As endothelial cells are important in angiogenesis, we treated the human umbilical vein endothelial cells (HUVECs) with 4HR and investigated protein expressional changes by immunoprecipitation high-performance liquid chromatography (IP-HPLC) using 96 antisera. Results: Here, we found that 4HR upregulated transforming growth factor-β (TGF-β)/SMAD/vascular endothelial growth factor (VEGF) signaling, RAF-B/ERK and p38 signaling, and M2 macrophage polarization pathways. 4HR also increased expression of caspases and subsequent cellular apoptosis. Mechanistically, 4HR increased TGF-β1 production and subsequent activation of SMADs/VEGFs, RAF-B/ERK and p38 signaling, and M2 macrophage polarization. Conclusion: Collectively, 4HR activates TGF-β/SMAD/VEGF signaling in endothelial cells and induced vascular regeneration and remodeling for wound healing.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.20.2-20.2
• /
• 2011

III-nitrides have attracted much attention for optoelectronic device applications whose emission wavelengths ranging from green to ultraviolet due to their wide band gap. However, due to the strong polarization properties of conventional c-plane III-nitrides, the built-in polarization-induced electric field limits the performance of optical devices. Therefore, there has been a renewed interest in the growth of nonpolar III-nitride semiconductors for polarization free heterostructure optoelectronic and electronic devices. However, the crystal and the optical quality of nonpolar/semipolar GaN have been poorer than those of conventional c-plane GaN, resulting in the relative poor optical and electrical properties of light emitting diodes (LEDs). In this presentation, I will discuss the growth and characterization of high quality nonpolar a-plane and semipolar (11-22) GaN and InGaN multiple quantum wells (MQWs) grown on r- and m-plane sapphire substrates, respectively, by using metalorganic chemical vapor deposition (MOCVD) without a low temperature GaN buffer layer. Especially, the epitaxial lateral overgrowth (ELO) technique will be also discussed to reduce the dislocation density and enhance the performance of nonpolar and semipolar GaN-based LEDs.