• 한국소음진동공학회논문집
• /
• 제19권10호
• /
• pp.1012-1020
• /
• 2009

This research is focused on the experimental study of the noise induced by two-phase refrigerant flow in the evaporator. The two-phase flow in the evaporator has various flow patterns. The effects of two-phase flow pattern's characteristics on the noise of the evaporator are investigated experimentally. The experimental data shows that the generated noise is mainly related to the layout of the pipe and the certain two-phase flow patterns such as the churn and slug flow. Based on these results, we removed the unnecessary vertical pipe and changed the pipe diameter of the evaporator - inlet into small one in order to avoid the intermittent flow condition. The noise level of newly-designed inlet-pipe of the evaporator was measured experimentally by refrigerant-supplying equipment and compared with that of conventional one.

• 한국음향학회지
• /
• 제43권1호
• /
• pp.112-121
• /
• 2024

배관시스템은 유체를 장거리로 이송시키는 장비로서 많은 산업군에서 사용되고 있다. 고압의 배관에서는 빠른 유속으로 인하여 소음이 크게 발생하고 있으며, 이러한 소음을 저감 시키기 위한 많은 연구가 수행되고 있다. 이 논문에서는 고온·고압의 배관내 밸브 유동을 원인으로 발생하는 유동유발진동과 음향유발진동을 설계단계에서 예측하고 정량적으로 분석을 위한 배관 소음 해석 기법을 개발하였다. 이를 위하여 배관의 내부 유동 예측을 위한 고정밀 유동 해석기법을 개발하였으며, 파수-주파수 분석법을 이용하여 주파수 대역별 압축성/비압축성 압력의 기여도를 평가하였다. 그리고 유한요소 해석법(Finite Element Method, FEM)을 기반으로 한 저·중 주파수 대역의 진동소음 해석기법을 개발하였으며, 통계적 에너지 분석법(Statistical Energy Analysis, SEA)을 기반으로 한 중·고 주파수 대역에서의 방사소음해석 기법을 개발하였다.

• 대한기계학회논문집B
• /
• 제35권2호
• /
• pp.205-213
• /
• 2011

진공청소기 브러쉬의 소음원인과 소음특성에 관하여 고찰하였다. 먼저, 소음원인을 분석하기위해서 수치해석 결과를 토대로 유동저항을 분석하였다. 그 결과 청소기 브러쉬 소음의 주요 원인은 팬회전에 의한 톤소음이 아니고, 브러쉬 내부의 유체역학적인 특성에 의한 유동저항 증가로 인해서 발생하는 유동소음임을 알 수 있었으며, 그 타당성을 무향실에서 음향파워 측정 실험을 통해서 확인하였다. 다음으로, 소음측정 실험을 통해서 브러쉬의 최적 설계를 통해 저감할 수 있는 최대 소음저감 한계가 4dBA 임을 확인하였다. 팬 블레이드 개수, 공기 흡입구 확장에 따른 소음 특성을 분석하였고, 이로부터 소음저감 한계가 너무 작아서 팬 블레이드 개수, 공기 흡입구 확장에 따른 소음 저감량이 2 dBA 이내로 작은 것을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.79-84
• /
• 2001

The motivation behind this work is to understand the phenomenon of friction-induced vibration and squeal due to misalignment. In present paper, it is studied on effect of misalignment between friction-induced vibration and squeal by an experiment using a pin-on-disk type experimental apparatus. In order to build an analytical model of the friction-induced vibration system with misalignment, the system is modeled as a single-DOF and 3-DOF system. The results show that the single DOF system can only show stick／slip phenomenon, but the 3-DOF system can show squeal due to misalignment. Consequently, it can be said that the misalignment in a friction-induced vibration system is a source of squeal noise.

• 동의생리병리학회지
• /
• 제21권2호
• /
• pp.523-527
• /
• 2007

Previous studies reported that exposure to noise during pregnancy adversely influenced the development of the fetus and neonate. In Oriental medicine, medications based on Angelicae gigantis radix have been known to be of efficacy in the treatment of various diseases. c-Fos, an immediate early gene whose expression is sometimes used as a marker for stimulus-induced changes in the metabolic activity of neurons. In the present study, the influence of postnatal Angelicae gigantis radix administration on c-Fos expression in the each region of hippocampus of offspring rats with prenatal noise stress during pregnancy was investigated. From the present results, exposure to the prenatal stress during pregnancy enhanced c-Fox expression, whereas exposure to postnatal Angelice gigantis radix suppressed c-Fos expression in the offsprings with prenatal noise stress during pregnancy. Based on the present study, Angelicae gigantis radix may provide new therapeutic opportunities as an agent to counteract the effects of prenatal noise stress- induced hippocampal dysfunction, and may be useful in the treatment of psychiatric problems in children of mothers who have experienced noise stress during pregnancy.

• ETRI Journal
• /
• 제38권1호
• /
• pp.1-8
• /
• 2016

A large incoherent crosstalk (IC) caused by amplified spontaneous emission (ASE) noise power from Tx-disabled optical network units and a differential path loss has been shown to degrade upstream transmission performance in time-division multiplexing passive optical networks. This paper considers the IC-induced power penalty of an upstream signal both in an XG-PON and in a TWDM-PON. We investigate the degradation of the extinction ratio and relative intensity noise through a simulation and experiments. For the XG-PON case, we observe a 9.6 dB difference in the level of ASE noise power from Tx-disabled ONUs (hereafter known simply as ASE noise) between our result and the ITU-T XG-PON PMD recommendation. We propose an optical filtering method to mitigate an IC-induced power penalty. In the TWDM-PON case, the IC-induced power penalty is naturally negligible because the ASE noise is filtered by a wavelength multiplexer at the optical line terminal. The results provide design guidelines for the level of ASE noise in both XG-PONs and TWDM-PONs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권3호
• /
• pp.206-209
• /
• 2006

This paper presents an analytical noise model for the drain thermal noise, the induced gate noise, and their correlation coefficient in deep-submicron MOSFETs, which is valid in both linear region and saturation region. The impedance field method was used to calculate the external drain thermal noise current. The effect of channel length modulation was included in the analytical equation. The noise behavior of MOSFETs with decreasing channel length was successfully predicted from our model.

• ETRI Journal
• /
• 제20권2호
• /
• pp.214-230
• /
• 1998

We investigate noise-induced transitions in active rotator model with a fluctuating threshold in the presence of an additive noise. The fluctuation of the threshold depends on the additive noise in a nonlinear fashion. In the white-noise limit of the fluctuation, the Fokker-Planck equation of the system reduces to that of the system with correlated linear fluctuation implying that the nonlinearity may be transformed into the correlation of linear noises. We also investigate the system with a nonlinear colored noise which depends on the additive noise as its square. The system shows a single peak, two peaks, and three peaks in its steady state probability distribution according to the noise intensities and the correlation time whose change leads to peak-creating, peak-splitting, and peak-merging transitions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.371-379
• /
• 2000

A noise prediction method of axial flow fan is developed by incorporating through-flow method and vortex shedding noise model. Fan noise is assumed to be generated due to the pressure fluctuation induced by wake vortices of fan blades and radiate as diploe distribution. The wake vortices are analyzed by combining Karman vortex street model and through-flow analysis results, and the vortex-induced fluctuating pressure on blade surface is calculated by thin airfoil theory. The predicted sound pressure levels and directivity patterns of fan noise by the present method are favorably compared with fan noise test data. Furthermore, the present method is shown to be very useful for predicting the aero-acoustic performance map of the fan operated at off-design point.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1300-1305
• /
• 2001

One of the main noise sources in cabin onboard ships is HVAC system. Up to now, the HVAC system designer manually calculates the HVAC system noise, or uses the program that is generally based on text user interface. In such a case, it is difficult to use the program and also to obtain the flow induced noise. In this study, the HVAC noise analysis program has been developed, which is based on GUI user interface that include 3.D modelling and model modification modules. For calculation of the insertion loss of HVAC system elements, NEBB experimental data and plane wave theory are used. And in order to obtain the flow rate information in each HVAC elements which is used to calculate the flow induced noise calculation, Global Converging Newton-Rapson Method is used.