• 제목/요약/키워드: indirect method

검색결과 1,747건 처리시간 0.027초

비특이화 간접경계적분방정식방법을 이용한 2차원 수치수조 개발 및 적용 (Development and Application of Two-Dimensional Numerical Tank using Desingularized Indirect Boundary Integral Equation Method)

  • 오승훈;조석규;정동호;성홍근
    • 한국해양공학회지
    • /
    • 제32권6호
    • /
    • pp.447-457
    • /
    • 2018
  • In this study, a two-dimensional fully nonlinear transient wave numerical tank was developed using a desingularized indirect boundary integral equation method. The desingularized indirect boundary integral equation method is simpler and faster than the conventional boundary element method because special treatment is not required to compute the boundary integral. Numerical simulations were carried out in the time domain using the fourth order Runge-Kutta method. A mixed Eulerian-Lagrangian approach was adapted to reconstruct the free surface at each time step. A numerical damping zone was used to minimize the reflective wave in the downstream region. The interpolating method of a Gaussian radial basis function-type artificial neural network was used to calculate the gradient of the free surface elevation without element connectivity. The desingularized indirect boundary integral equation using an isolated point source and radial basis function has no need for information about the element connectivity and is a meshless method that is numerically more flexible. In order to validate the accuracy of the numerical wave tank based on the desingularized indirect boundary integral equation method and meshless technique, several numerical simulations were carried out. First, a comparison with numerical results according to the type of desingularized source was carried out and confirmed that continuous line sources can be replaced by simply isolated sources. In addition, a propagation simulation of a $2^{nd}$-order Stokes wave was carried out and compared with an analytical solution. Finally, simulations of propagating waves in shallow water and propagating waves over a submerged bar were also carried and compared with published data.

3상 인버터의 DC 링크 커패시터 전류의 센서리스 측정 (Sensorless measurement of the DC link capacitor current of three-phase inverter)

  • 수효동;정영국;임영철
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2012년도 추계학술대회 논문집
    • /
    • pp.205-206
    • /
    • 2012
  • A general method to measure the inverter DC bus capacitor current is described. It is an indirect estimated method. By measuring the input and out voltage and current can calculate DC bus capacitor current. This paper will develope the theory that describes the indirect method. It will discuss and verify the feasibility of this approach through the use of the PSIM. Using SPWM control method will be simulated and compared.

  • PDF

Procedures for Detecting Multiple Outliers in Linear Regression Using R

  • Kwon, Soon-Sun;Lee, Gwi-Hyun;Park, Sung-Hyun
    • 한국통계학회:학술대회논문집
    • /
    • 한국통계학회 2005년도 추계 학술발표회 논문집
    • /
    • pp.13-17
    • /
    • 2005
  • In recent years, many people use R as a statistics system. R is frequently updated by many R project teams. We are interested in the method of multiple outlier detection and know that R is not supplied the method of multiple outlier detection. In this talk, we review these procedures for detecting multiple outliers and provide more efficient procedures combined with direct methods and indirect methods using R.

  • PDF

간접냉각시스템을 이용한 인코넬 718소재의 가공성 평가 (Machinability Evaluation of Inconel 718 Material Using Indirect Cooling System)

  • 김진형;이여울;박성환;이동진;강명창
    • 한국기계가공학회지
    • /
    • 제18권2호
    • /
    • pp.96-101
    • /
    • 2019
  • This paper presents a machinability evaluation of Inconel 718 material when using a new uniform-temperature indirect cooling method that incorporates constant-pressure liquid nitrogen (LN2). The flank wear of a TiAlN coated tool used with this indirect cooling system was much lower than that of the tool used with dry machining under all machining conditions. Also, the surface roughness resulting from machining with this indirect method was far less than that of a dry machined surface after the same cutting time. Reduced heat generation and uniform temperature in turning operations play important roles in tool life and surface quality.

IgY 항체를 이용하여 Lactoperoxidase 정량을 측정하기 위한 Indirect ELISA 방법의 개발 (Indirect ELISA Method for Measurement of Lactoperoxidase using IgY Antibody)

  • 이승배;최석호;최재원
    • 한국축산식품학회지
    • /
    • 제24권2호
    • /
    • pp.182-188
    • /
    • 2004
  • Lactoperoxidase(LPO)를 농도를 측정하기 위한 ELISA을 개발하기 위해 LPO로 면역시킨 갈색 산란계의 계란에서 형성된 anti-LPO IgY 항체를 분리 정제하고, 분리된 anti-LPO IgY 항체의 특이성을 ELISA 와 double immunodiffusion 방법으로 조사한 후 indirect ELISA 방법을 이용한 표준곡선을 만들었다. 분리 정제된 anti-LPO IgY항체의 titer는 1:520,000이며, ELISA와 double immunodiffusion 방법 모두에서 $\alpha$-lactalbumin, $\beta$-lactoglobulin, casein 및 lysozyme하고는 교차반응을 하지 않고 LPO만 높은 특이성을 갖는 항체로 나타났다. Indirect ELISA방법에서 LPO의 coating 농도는 0.25 $\mu\textrm{g}$/mL이며 anti-LPO IgY 최적 희석배수는 1:8,000으로 나타났다. Indirect ELISA 방법으로 LPO를 측정할 수 있는 표준곡선에서 민감도의 범위는 0.0l-l $\mu\textrm{g}$/mL로 나타났다.

간접접촉 심전도 측정용 전극의 주파수 특성 (Frequency Response of the electrode for Indirect-contact ECG)

  • 임용규
    • 대한의용생체공학회:의공학회지
    • /
    • 제29권3호
    • /
    • pp.249-253
    • /
    • 2008
  • The indirect-contact ECG (IDC-ECG) was introduced by a prior study for daily non-intrusive measurements. To improve the signal quality and to extend the application area of IDC-ECG, close study of the frequency characteristics of the IDC-ECG is necessary. In this study, the frequency response of the active electrode for several sample clothes was measured under conditions of actual IDC-ECG measurement with human body. Higher gain in low frequency range than expected by prior study was observed. In addition to it, wide variation in gain according to the cloth type in the low frequency range was observed. Variation in gain caused by moisture variation in the clothes was also observed. This study shows that the parallel R-C connection is proper for electrode model and the resistive factor is influenced by moisture in the clothes. This study is the first that provides the frequency response of the electrode in the actual indirect-contact ECG measurement and it is expected that the results will be helpful to improve the indirect-contact ECG method.

확장 칼만 필터 학습 방법 기반 웨이블릿 신경 회로망을 이용한 비선형 시스템의 간접 적응 제어 (Indirect Adaptive Control of Nonlinear Systems Using a EKF Learning Algorithm Based Wavelet Neural Network)

  • 김경주;최윤호;박진배
    • 한국지능시스템학회논문지
    • /
    • 제15권6호
    • /
    • pp.720-729
    • /
    • 2005
  • 본 논문에서는 미지의 비선형 시스템을 제어하기 위해 웨이블릿 신경 회로망을 이용한 간접 적응 제어기를 설계한다. 제안 된 간접 적응 제어기는 웨이블릿 신경 회로망을 이용한 동정 모델과 제어기로 구성된다. 여기서 동정 모델과 제어기에 사용되는 웨이블릿 신경 회로망은 시간과 주파수에 대한 정보를 동시에 포함하는 웨이블릿의 특성을 가지고 있기 때문에 다층구조 신경회로망과 방사 기저 함수 신경회로망에 보다 더 빠른 수렴특성을 보인다. 웨이블릿 신경 회로망의 학습방법은 경사 하강법, 유전알고리듬, DNA 기법등 여러 가지가 있으나, 본 논문에서는 확장 칼만 필터를 기반으로 한 학습 방법을 제안한다. 확장 칼만 필터 학습 방법은 계산이 복잡하기는 하지만 학습되어 갱신되는 파라미터의 이전 데이터 정보를 이용하는 특성 때문에 매우 빠른 수렴 특성을 보인다. 본 논문에서는 Buffing 시스템과 1축 머니퓰레이터에 대한 컴퓨터 모치실험을 통해 제안한 확장 칼만 필터 학습 방법을 이용한 간접 적응 제어기가 일반적인 경사 하강법을 이용한 경우보다 우수함을 보인다.

용량성 결합 능동 전극의 공통 모드 구동 차폐 (A Study on comnon-mode-driven shield for capacitive coupling active electrode)

  • 임용규
    • 융합신호처리학회논문지
    • /
    • 제13권4호
    • /
    • pp.201-206
    • /
    • 2012
  • 간접접촉 심전도 측정(Indirect-Contact ECG)은 일상생활에서의 무구속 무자각 측정에 적합한 심전도 측정 방법이다. 본 연구는, 간접접촉 심전도 측정에서 크게 관측되는 60Hz 전원선 잡음을 줄이기 위한 새로운 방법으로, 공통모드 구동 차폐 방식을 제안하였다. 공통 모드 구동 차폐 방식은, 간접 접촉 심전도에서 사용되는 용량성 결합 능동 전극(Capacitive coupling active electrode)을 둘러싼 전기적 차폐(electric shield)의 전압을 공통 모드 전압과 동일하게 유지하는 방법이다. 이 방법은 공통모드 전압의 크기는 그대로 유지하지만, 의복 임피던스 차에 의한 공통모드 전압의 차동 모드 전환에 의한 잡음은 효과적으로 줄일 수 있다. 따라서 두 전극 사이의 의복의 임피던스 차이가 커서 공통 모드 전원 잡음이 심각한 간접 접촉 심전도 측정에서, 효과적으로 공통 모드 잡음을 줄일 수 있다. 실제 간접 접촉 심전도 측정에 제안된 방법을 적용한 결과로 이론적 예상보다는 60Hz 잡음 감소비가 적었지만, 60Hz 잡음이 크게 줄어드는 것을 확인할 수 있었다. 특히 의복 임피던스 차가 크게 발생하는 경우, 예상대로 잡음 감소비가 커짐을 볼 수 있었다. 제안된 방법은 접지 특성이 좋지 않은 측정 조건에서 전원 잡음을 줄이는데 유용할 것으로 기대된다.

비선형 시스템제어를 위한 복합적응 신경회로망 (Composite adaptive neural network controller for nonlinear systems)

  • 김효규;오세영;김성권
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.14-19
    • /
    • 1993
  • In this paper, we proposed an indirect learning and direct adaptive control schemes using neural networks, i.e., composite adaptive neural control, for a class of continuous nonlinear systems. With the indirect learning method, the neural network learns the nonlinear basis of the system inverse dynamics by a modified backpropagation learning rule. The basis spans the local vector space of inverse dynamics with the direct adaptation method when the indirect learning result is within a prescribed error tolerance, as such this method is closely related to the adaptive control methods. Also hash addressing technique, similar to the CMAC functional architecture, is introduced for partitioning network hidden nodes according to the system states, so global neuro control properties can be organized by the local ones. For uniform stability, the sliding mode control is introduced when the neural network has not sufficiently learned the system dynamics. With proper assumptions on the controlled system, global stability and tracking error convergence proof can be given. The performance of the proposed control scheme is demonstrated with the simulation results of a nonlinear system.

  • PDF

파워흐름경계요소법을 이용한 원통형 구조물에 대한 음파산란해석 (The analysis of aoustic scattering problems by Indirect PFBEM with cylinder model)

  • 정필우;홍석윤;이호원;권현웅
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
    • /
    • pp.90-93
    • /
    • 2005
  • Power Flow Boundary Element Method(PFBEM) has been used as a promising tool for radiation problems in the midium-to-high frequency. PFBEM is the numerical method that applies boundary element technique to Power Flow Analysis (PFA). Indirect PFBEM is developed for acoustic scattering problems in the open field and in various frequency. To verify the analytic results of indirect PFBEM for acoustic scattering problems are compared with those of SYSNOISE, and the results using two analytic methods show a good agreement.

  • PDF