• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.411-418
• /
• 2002

In domestic road construction sites, the compaction control based on strength are widely performed through the direct method with high accuracy, such as Plate Loading Test or Field CBR test. It is impossible to manage all construction sites using the direct method because the direct method requires heavy reaction loads and long measurement time. Therefore, it is necessary to apply the indirect method that could control the relative density of construction sites on the whole. Indirect methods, such as Cone Penetration Test and Fall Cone Test, require extra time for data analyzing and fixed area for test device. In this paper, the field applicability of Soil Impact Hammer (SIH) was investigated comparing with the results of field measurement tests and laboratory compaction tests. SIH developed by Japan Construction Administration and Asanuma Ltd., is a kind of indirect methods for compaction checking. According to the results of SIH performed in domestic road construction site, the subgrade reaction modulus obtained from SIH are similar to that from Plate loading tests in the range of 10 to 40. In comparison with laboratory compaction test, similar compaction line are shown in the dry side of optimum moisture contents.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.256-263
• /
• 2002

The Boil-Off-Gases(BOG) in the LNG production terminal are continuously generated during the unloading, storage and supply processes by the heat penetration. In order to use these gases as useful fuel, the reliquefaction process should be installed to put the reliquefied BOG in the main LNG supply line before the secondary pump in terminal. The current reliquefaction method of BOG in LNG terminal is the direct contact one between LNG and BOG in the absorption column. But the system has severe disadvantage, which is the 10 times of LNG circulation needed for unit mass of BOG reliquefaction. It causes, therefore, high power consumption of LNG circulation pump and excessive city-gas supply, even if short demand of NG is needed in the summer time. In this paper, the new reliquefaction system of BOG by using LNG cold energy with indirect contact in precooler was suggested and analysed. The result showed new indirect contact method of BOG reliquefaction system between LNG cold energy and BOG is much more effective than the current direct contact one because of only about 1.3 times of LNG circulation needed and higher energy saving by pump power reduction.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.641-652
• /
• 2017

This paper proposes a cost-effective topology to drive a three-phase open-end load based on a five-leg indirect matrix converter (IMC) and a space vector modulation (SVM) method. By sharing an inverter leg with two load terminals, the proposed topology can reduce the number of power switches when compared to topologies based on a direct matrix converter or a six-leg IMC. The new SVM method uses only the active vectors that do not produce common-mode voltage (CMV), which results in zero CMV across the load phase and significantly reduces the peak value of the CMV at the load terminal. Furthermore, the proposed drive system can increase the voltage transfer ratio up to 1.5 and provide a superior performance in terms of an output line-to-line voltage with a three-level pulse-width modulation waveform. Simulation and experimental results are given to verify the effectiveness of the proposed topology and the new SVM method.

• Korean Journal of Veterinary Service
• /
• v.16 no.2
• /
• pp.111-119
• /
• 1993

In this study, we carried out the rapid diagnostic system based on indirect fluorescent anti-body technique (IFAT) for detection of bacterial diseases in cultured freshwater fishes. 1. When the fishes were tested with graded dilution of Edwardsiella tarda FPC 470 bacteria detection from ten fishes Injected with $4.1{\times}10^3$colony forming unit(CFU) /ml, all of them were detected by IFAT but only two fishes were recognizable by the culture method in the tested fishes injected with $4.1{\times}10^3$CFU /ml. 2. The bacteria E. tarda could be detected by IFAT method from 1 to 48hrs after Injection in the tissues tested such as kidney, liver and spleen of the fishes, whereas detection by culture method could be recognized from 1 to 48hrs after injection In the kidney and spleen but it was not possible from preinjection to 1 hr in the liver. 3. Thus, IFAT proved to be more useful technique than plate culture method in the diagnosis of Edwardsiellosis in the freshwater fishes.

• Journal of Korean Dental Science
• /
• v.7 no.2
• /
• pp.66-79
• /
• 2014

Purpose: To analyze the amount and pattern of tooth movement and the changes in arch dimension of mandibular dentition after orthodontic treatment using a new three-dimensional (3D)-indirect superimposition method. Materials and Methods: The samples consisted of fifteen adult patients with class I bialveolar protrusion and minimal anterior crowding, treated by extraction of four first premolars with conventional sliding mechanics. After superimposition of 3D-virtual maxillary models before and after treatment using best-fit method, 3D-virtual mandibular model at each stage was placed into a common coordinate of superimposition using 3D-bite information, which resulted in 3D-indirect superimposition for mandibular dentition. The changes in mandibular dental and arch dimensional variables were measured with Rapidform 2006 (INUS Technology). Paired t-test was used for statistical analysis. Result: The anterior teeth moved backward, displaced laterally, and inclined lingually. The posterior teeth showed statistically significant contraction toward midsagittal plane. The amounts of backward movement of anterior teeth and forward movement of posterior teeth showed a ratio of 6 : 1. Although the inter-canine width increased slightly (0.8 mm, P<0.05), the inter-second premolar, inter-first molar, and inter-second molar widths decreased significantly with similar amounts (2.2 mm, P<0.05; 2.3 mm, P<0.01; 2.3 mm, P<0.001). The molar depth decreased (6.7 mm, P<0.001) but canine depth did not change. Conclusion: A new 3D-indirect superimposition of the mandibular dentitions using best-fit method and 3D-bite information can present a guideline for virtual treatment planning in terms of tooth position and arch dimension.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.43-50
• /
• 2002

In the design of structure, the forces acting on tai structure are key parameter fur noise and vibration control. However, in the complex structure, the forces at the injection point on the structure cannot be measured directly. So, it is necessary to find out Indirect force evaluation method. In this paper, forces have been measured with In-situ vibration responses and system information. And, three existing techniques of indirect force measurement, vita. direct inverse. principal component analysis and regularization have been compared. This paper shows that multi-vibration responses are essential for talc precise estimation of the forces. To check these conditions, rotary compressor is adopted as test sample, because it is very difficult to measure the injection forces from internal excitation to shell. It alas also been obtained that relatively higher force is transmitted through three welding paths to the compressor shell. It shows a good agreement between direct and indirect force evaluation with curvature shell and plate.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.3
• /
• pp.417-424
• /
• 2007

The purpose of this study was to measure the effects that service quality, perceived value and satisfaction have on loyalty in Namhaean area restaurants. A total of 273 questionnaires were completed. The structural equation model was used as an analysis method to measure the causal effects of service quality, perceived value, satisfaction and loyalty. The results demonstrated that the structural analysis result for the data was an excellent model fit. The effect of service quality on value, the effect of perceived sacrifice on value, the effect of service quality on satisfaction, the effect of value on satisfaction, and the effect of satisfaction on loyalty were statistically significant. Moreover service quality had an indirect effect on satisfaction through perceived value, and service quality also had an indirect effect on loyalty through perceived value and satisfaction. Perceived value had an indirect effect on loyalty, and an effect through satisfaction. Perceived sacrifice had an indirect effect on satisfaction through perceived value, and it also had an indirect effect on loyalty, and an effect through satisfaction. Further study is still required, and should be aimed at identifying the causal mechanisms of constructs, such that restaurant managers might be better prepared to offer value and satisfaction to their customers.

• Journal of the Korean Data and Information Science Society
• /
• v.13 no.1
• /
• pp.35-45
• /
• 2002

For improving the quality of survey dat a of sensitive character, we suggest a conditional in direct survey method. In th at method, only the respondents who answer directly to the less sensitive question respond indirectly to the more sensitive one by using the one sample unrelated question randomized response technique with the known $\pi_y$, the true proportion of unrelated group Y. We extend it to two sample method when $\pi_y$ is unknown. We also consider the case that people who possess less sensitive character answer untruthfully. Finally we compare our method with the methods of Greenberg et al. and Carr et al..

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.18-23
• /
• 2007

Purpose: Anthropometry can be divided into two methods, direct anthropometry and indirect anthropometry. The most ideal and accurate method is a direct anthropometry. However, it is difficult to measure in the case of children because of poor cooperation, and it lacks re-productivity. Cast model has advantages of three dimensional featuring, inexpensive and easy fabrication. This study is conducted to find out an accuracy of indirect anthropometry on cast model by comparing it with direct anthropometry. Methods: Total 48 cleft lip nasal deformity patients (unilateral, 40; bilateral, 8) were included in this study. Cast models were made before surgery under general anesthesia with alginate impression material and model plaster. Eleven linear measurements among 7 landmarks were taken as direct anthropometry before surgery with Castroviejo spreading caliper. At the same time, indirect anthropometry on cast model was done at the same linear distances as well. Results: Of the total 11 linear measurements, both ala lengths, both columella lengths, nose width, projective distance between facial insertion points of the ala, projective distance between the alar base points, right nostril floor width, and columella width were statistically correlated between indirect anthropometry on cast model and direct anthropometry. However, the nasal tip protrusion and the left nostril floor width were not statistically correlated. Conclusion: Accuracy of indirect anthropometry on cast model can be influenced by cast model fabrication techniques and correct identification of landmarks. Nasal tip protrusion could be reduced by compression of the nasal tip in the process of cast model fabrication and nostril floor width can be varied by muscle relaxation of anesthetics and incorrect identification of subalare in cleft lip nasal deformity. If sufficient care is taken to make cast model and to define landmarks exactly, indirect anthropometry on cast model can be a reliable method as direct anthropometry.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.121-135
• /
• 1996

Actinomyces are Gram-positive, non-acid-fast, anaerobic or microaerophilic filamentous bacteria. These organisms are frequently detected from infected root canals and periapical lesion. The purpose of this study was to use indirect immunofluorescence to determine the prescence of select Actinomyces species in a survey of teeth associated with periapical lesion, to clarify the relationship between clinical symptoms of periapical lesions and the Actinomyces species and to study on the cross reaction among Actinomyces. Actinomyces israelii serotype I (ATCC 12102), Actinomyces israelii serotype II (ATCC 29322), Actinomyces viscosus serotype II (ATCC 19246), Actinomyces naslundii serotype I (ATCC 12104) were cultured in anaerobic condition. Rabbit antisera were prepared by intravenous injection of formalized whole cells. Indirect immunofluorescence method was used to achieve the purpose. The following results were obtained. 1. There was a relationship between Actinomyces and periapical disease. 2. A. israelii serotype I, II were frequently identified with Indirect Immunofluorescence and most often assosiated with periapical disease. In culture finding, there was no significant difference between each group. 3. Indirect Immunofluoresence is both more sensitive and more rapid than culture for identification of Actinomyces species in patients with periapical lesion. 4. A. israelii serotype I, II was highly isolated in infected root canals with local swelling, A. naslundii serotype I was highly isolated in those with foul odor, and A. israelii serotype I was found in higher frequncy in those with exudate than other bacteria. 5. In the Indirect Immunofluorescence (1 : 320), A positive cross reaction was obtained between A. israelii serotype I and A. israelii serotype II, also, A. viscosus serotype II and A. naslundii serotype I. There was no cross reaction between A. israelii serotype I, II and A. viscosus serotype II, A. naslundii serotype I.