• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.622-627
• /
• 2004

This paper investigated the speed sensorless indirect vector control of a two-phase induction motor to implement adjustable-speed drive for low-power applications. The sliding mode observer estimates rotor speed. The convergence of the nonlinear time-varying observer along with the asymptotic stability of the controller was analyzed. To define the control action which maintains the motion on the sliding manifold, an 'equivalent control' concept was used. It was simulated and implemented on a sensorless indirect vector drive for 150W two-phase induction motor. The simulation and experimental results demonstrated effectiveness of the estimation method.

• 제어로봇시스템학회논문지
• /
• 제6권12호
• /
• pp.1120-1125
• /
• 2000

This paper presents a technique for estimating the attitude of a model helicopter at near hovering using a combination of inertial and non-inertial sensors such as gyroscope and potentiometer. To estimate the attitude of helicopter a simplified indirect Kalman filter based on sensor modeling is derived and the characteristics of sensors are studied, which are used in determining the optimal Kalman gain. To verify the effectiveness of the proposed algorithm simulation results are presented with real flight data. Our approach avoids a complex dynamic modeling of helicopter and allows for an elegant combination of various sensor data with different measurement frequencies. We also describe the method of implementation of the algorithm in the model helicopter.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1054-1058
• /
• 1995

There have been many research works for the indirect cutting force measurement in machining process, which deal with the case of one-axis cutting process. In multi-axis cutting process, the main difficulties to estimate the cutting forces occur when the feed direction is reversed. This paper presents the indirect cutting force measurement method in contour NC milling processes by using current signals of servo motors. An artificial neural network (ANN) system are suggested. An artificial neural network(ANN) system is also implemented with a training set of experimental cutting data to measure cutting force indirectly. The input variables of the ANN system are the motor currents and the feedrates of x and y-axis servo motors, and output variable is the cutting force of each axis. A series of experimental works on the circular interpolated contour milling process with the path of a complete circle has been performed. It is concluded that by comparing the ANN system with a dynamometer measuring cutting force directil, the ANN system has a good performance.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권1호
• /
• pp.40-46
• /
• 2005

This paper has investigated the speed sensorless indirect vectorcontrol of a two-phase induction motor to implement adjustable-speed drive for low-power applications. The sliding mode observer estimates rotor speed. The convergence of the nonlinear time-varying observer along with the asymptotic stability of the controller has been analyzed. To define the control action which maintains the motion on the sliding manifold, an "equivalent control" concept is used. It has been simulated and implemented on a sensorless indirect vector drive for 150W two-phase induction motor. The simulation and experimental results demonstrate effectiveness of the estimation method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.660-664
• /
• 2004

The indirect rotor position detection method using terminal voltage of brushless DC motor (BLDCM) requires simple control circuit, and has wide speed range of sensorless operation. However, because the substantial phase difference exists between real back emf and terminal voltage, the existing indirect detection method using analog filter which is affected by frequency, speed, and load sensitively cannot be synchronized with current, in the end, it advances or delays. This paper presents new analog filter circuit design for rotor position estimation in order to solve the problem, and proposes novel sensorless operation method which is stable even in high speed range and not influenced by parameters with analysis on phase difference by load and speed. Moreover, the appropriateness of the proposed sensorless drive in this paper is verified and analyzed by experimentation.

• 지역연구
• /
• 제35권4호
• /
• pp.3-18
• /
• 2019

이 논문은 농촌중심지들을 대상으로 직접설문조사를 시행하여 경제기반승수를 산출하고, 간접추정 방법들을 적용하여 추정한 경제기반승수와 비교하는 것이 주목적이다. 한국의 경제기반 연구에서 직접조사 방법은 본 연구에서 처음 시도되는 것이다. 연구대상지로는 청원군(현 청주시) 5개 면을 선정했으며, 해당 면지역의 직접조사 자료와 사업체 기초통계조사자료를 이용하여 경제기반승수를 추정하였다. 경제기반이론을 실제 사례에 적용하는 직접조사 방법을 통해서 정확한 경제기반승수를 산출하고, 간접적으로 추정한 승수값과 비교하여 간접추정 방법들의 장단점을 검토해 보았다. 임의가정 방법, 입지계수 방법, 최소요구치 방법 등 경제기반승수의 간접추정 방법들은 기본가정에 문제점이 있지만 최소요구치 방법이 다른 방법보다는 현실적 가정 측면에서 우월하며, 가능하다면 직접조사를 하고 역외 통근자와 역내 통근자 자료를 반영하면 더욱 정확한 승수를 추정할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.286-289
• /
• 1997

In the design of structure the forces acting on the structure are important parameter for noise and vibration control. However, in the complex structure, the forces at the injection pomt on the structure cannot be measured directly. Thus it is necessary to find out indirect force evaluation method. In thls paper forces have been measured with in-situ vibration responses and system information. Three existing techniques of indirect force measurement, viz. direct inverse, principal component analysis and regularization have been compared. It has been shown that multi-vibration responses are essential for the precise estimation of the forces. To satisfy those cond~tions, Rotary compressor is adopted as test sample, because it is very difficult to measurc the injection forces from internal excitat~on to shell. It has also been obtained that relatively higher force IS transmitted through three welding paths to the compressor shell. It shows a good agreement between direct and indirect force evaluation wlth curvature shell and plate and is investigated the possibility of force evaluation of rotary compressor as a complex structure.

• Communications for Statistical Applications and Methods
• /
• 제7권1호
• /
• pp.257-268
• /
• 2000

As one of indirect ways to get an optimal answer for sensitive questions both lower and upper values are sometimes asked and collected. In this paper a statistical method is proposed to analyze this kind of data using graphics. This method could define each sample median and estimate an optimal value between lower and upper bounds. In particular we find that this method has similar explanations of an equilibrium price with demand and supply functions in Economics.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.645-663
• /
• 2015

Recently, an indirect displacement estimation method using data fusion of acceleration and strain (i.e., acceleration-strain-based method) has been developed. Though the method showed good performance on beam-like structures, it has inherent limitation in applying to more general types of bridges that may have complex shapes, because it uses assumed analytical (sinusoidal) mode shapes to map the measured strain into displacement. This paper proposes an improved displacement estimation method that can be applied to more general types of bridges by building the mapping using the finite element model of the structure rather than using the assumed sinusoidal mode shapes. The performance of the proposed method is evaluated by numerical simulations on a deck arch bridge model and a three-span truss bridge model whose mode shapes are difficult to express as analytical functions. The displacements are estimated by acceleration-based method, strain-based method, acceleration-strain-based method, and the improved method. Then the results are compared with the exact displacement. An experimental validation is also carried out on a prestressed concrete girder bridge. The proposed method is found to provide the best estimate for dynamic displacements in the comparison, showing good agreement with the measurements as well.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1166-1176
• /
• 2017

Estimation errors of the rotor speed and position in sensorless control systems of Permanent Magnet Synchronous Motors (PMSM) will lead to low efficiency and dynamic-performance degradation. In this paper, a parallel-type extended nonlinear observer incorporating the nominal parameters is constructed in the stator-fixed reference frame, with rotor position, speed, and the load torque simultaneously estimated. The stability of the extended nonlinear observer is analyzed using the indirect Lyapunov's method, and observer gains are selected according to the transfer functions of the speed and position estimators. Taking into account the parameter inaccuracies issue, explicit estimation error equations are derived based on the error dynamics of the closed-loop sensorless control system. An equivalent flux error is defined to represent the back Electromotive Force (EMF) error caused by the inaccurate motor parameters, and a compensation strategy is designed to suppress the estimation errors. The effectiveness of the proposed method has been validated through simulation and experimental results.