• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.179-193
• /
• 2006

Technical efficiency of semiforcing watermelon growers is 0.8248 on average, and distributed between 0.6744 and 0.9268. The result showed that semiforcing watermelon growers had by 18% of technical inefficiency and could be assumed that increasing technical efficiency could induce watermelon production more increase. Consequently, if growers' technical efficiency were improved while other environments were constant, watermelon production could be increased. Following the results from the inefficiency effect model, all assumption coefficient such as growers age etc, are significant at 10% level. Estimate of dispersion parameter ${\gamma}$ is 0.89, which confirms those differences between practical output and frontier output were derived from the technical efficiencies among growers. Differences of production system between high and low level growers in production efficiency were showed at side altitude, ventilation and heat-retaining in section of facilities and automation, soil test and calcium application in section of environment management, transplant preparation and duration of pollination in section of crop management and shipment place, sorting degree and management record analysis in section of business management respectively. As a result of analyzing consulting data by using standard diagnosis table of watermelon cultivation under structure which cultivated on semi-forced watermelon growers, gap between high and low level growers was 7.0 points in facility automation section, 7.1 points in environment section, 8.8 points in crop management section and 13.6 points in business management section, respectively, which were the biggest one among them. In case of excluding information-related items from the evaluation index of business management section, changes of business achievement are to occur. Therefore, it is recommended for us to review the standard diagnostic table of watermelon cultivation under structure by dividing evaluation index of management section into management and information.

• The Journal of the Korean life insurance medical association
• /
• v.3 no.1
• /
• pp.103-141
• /
• 1986

The present study was undertaken to establish the decision standard of builds for the insured by using the ratio of weight-for-height as build index. Materials being examined were the ratio of weight-for-height being calculated from the actually measured heights and weights of a total of 15,838 insured persons who were examined medically at Honam Medical Department of Dong Bang Life Insurance Company, Ltd. from June, 1979 to September, 1985. The ratio of weight-for-height is calculated by the following formula. The ratio of weight-for-height(%)=$\frac{weight(kg){\times}100}{\{height(cm)-100\}{\times}0.9(kg)$ The results were as follows: 1. The distribution of the ratio of weight. for-height of the 15,838 insureds follows Log normal distribution being skewed to the left(the direction of underweight). 2. The ratio of weight-for-height were Log transformed to lead to a sym metrical pattern of distribution in which statistical rules are known to be applied more exactly. Thereafter, the establishment of dicision standard of builds was undertaken by using the log of the ratio of weight-for-height as build index. Through all ages in male, the ratio of weight-for-height indicating the range of standard lives including slight overweighted and underweighted lives besides normal lives is 80-130%, and corresponds to $"M-2{\delta}"-"M+1.5{\delta}"$ and to $M{\pm}20%$ ; in female, 85-135%, and corresponds to $"M-2{\delta}"-"M+1.5{\delta}"$ and to $M{\pm}20%$. Through all ages in male, the ratio of weight-for-height indicating the initial level of super-overweighted and super-underweighted lives is 130-150% and 75-80%,and corresponds to $M+3{\delta}\;and\;M-3{\delta}$ and to M+40% and M-25% respectively;in female, 140-160% and 75-80%, and corresponds to $M+3{\delta}\;and\;M-3{\delta}$ and to M+40%-+50% and M-25% respectively. 3. Author's rating table model for builds(a table of weight per height) is proposed. On the table, the ratings for builds, i. e. standard, super-weighted and super-underweighted lives, are listed.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.350-360
• /
• 2013

The purpose of this study was to analyze how much the beauty industry contributes to the national economy by measuring economic spreading effects of beauty industry on national economy. To achieve this purpose, the study used the beauty Input-Output Table of year 2009 of korea. The results shows that beauty industry induce 598,453 billion won of national production, especially beauty industry shows that production inducement coefficient is 1.810,Index of the power of dispersion is 0.965, index of the sensitivity of dispersion is 0.534, value-added coefficient is 0.728, and labor inducement coefficient is 0.039. The beauty industry's final demand 11,004 won be put into the national economy, GDP inducement 598,438 one billion won in the beauty industry one billion won 11,029 accounted for 1.8% of the total, and the value-added inducement 4,947 billion(2.3%),tax inducement 23,798.5 billion(3.5 %), income inducement 91,187 billion(2.5%). Regarding the industrial linkage effect, beauty industry has an relatively higher growth potential in the national economy than other the manufacturing industry.

• The Korean Journal of Archival Studies
• /
• no.70
• /
• pp.41-83
• /
• 2021

After the revision of the Enforcement Decree of the Public Records Act, the archives created a management standard table for data set records management and performed management and control. Therefore, in this study, the data set record identification procedure and evaluation index were developed for systematic data set record management of archives. By applying this, a management standard table was prepared after identifying the records of 8 datasets in kr's electronic procurement system, and the evaluation was carried out according to the evaluation index, and the retention period, transfer, and collection were determined. It is hoped that this case study will be of practical use to the archives at a time when concrete examples of procedures for the management of dataset records are lacking.

• Journal of Environmental Science International
• /
• v.17 no.8
• /
• pp.891-898
• /
• 2008

This study was conducted to develop the effects of site environmental factors on estimation of site index function for Chamaecyparis obtusa Endlicher stands. We derived nonlinear growth equation and the draw site index curves by applying this estimated equation. This study with Chapman-Richards function showed significant P-value which was less then 0.0001 and $R^2$ value 0.5947. This study was conducted to develop the feasible site index equation of Chamaecyparis obtusa Endlicher. For the table, the data of 82 sample areas that were thought to be without errors among the data of Chamaecyparis obtusa Endlicher sample area located on the value-oriented forest location chart were used and estimated. After analyzing the quantification method I based on 13 environmental factors to develop the score table for the site-index estimation of Chamaecyparis obtusa Endlicher, $R^2$ value of the model was 0.7555. It has been analyzed that the scope value of Soil moisture in horizon A was 7.5045, that of total soil depth was 6.3896, that of topography was 5.3471, that of slope was 4.7000 and that of aspect was 3.2038. After analyzing the partial correlation to examine the factors that affected most the site-index of Chamaecyparis obtusa Endlicher, it has been noted that the partial correlation of climatic zone was 0.4987, which was highest, and it was followed by Soil moisture in horizon A (0.4592), slope (0.4537), topography (0.3299) and total soil depth (0.1035). As a result of conducting the significance test for partial correlation, it has been found that topography, climatic zone, parent rock, slope, altitude, aspect, Soil moisture in horizon A, soil hardness in horizon A and total soil depth were recognized significant with 1% of significance level and sedimentary type and soil texture in horizon A were recognized significant with 5% of significance level.

• The KIPS Transactions:PartB
• /
• v.14B no.7
• /
• pp.481-492
• /
• 2007

In this paper, a method for automatic indexing of contents to reduce effort for inputting paper information and constructing index is considered. Existing document analysis methods can't analyse various table of contents of journal paper formats efficiently because they have many exceptions. In this paper, various contents formats for journals, which have different features from those for general documents, are analysed and described. The principal elements that we want to represent are titles, authors, and pages for each papers. Thus, the three principal elements are modeled according to the order of their arrangement, and their features are extracted. And a table of content recognition system of journal is implemented, based on the proposed modeling method. The accuracy of exact extraction ratio of 91.5% on title, author, and page type on 660 published papers of various journals is obtained.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.70-76
• /
• 2010

This paper Extended ELZW(EBCDIC Lempel Ziv Welch) algorithm uses 2 byte prefix field for pointer of a table and 1 byte suffix field for repeat counter. where, a prefix field uses a pointer(index) of compression table and a suffix field uses a counter of overlapping or recursion text data in compression table. To increase compression ratio, after construction of compression table, table data are properly packed as different bit string in accordance with a alphabet, Hangeul, and pointer respectively. Therefore, proposed ELZW algorithm is superior to 1byte LZW algorithm as 5.22 percent and superior to 2byte LZW algorithm as 8.96 percent.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.399-407
• /
• 1996

A fuzzy learning algorithm to get the optimal fuzzy rules is presented in this paper. The algorithm introduces a reference model to generate a desired output and a performance index funtion instead of the performance index table. The performance index funtion is a cost function based on the error and error-rate between the reference and plant output. The cost function is minimized by a gradient method and the control input is also updated. In this case, the control rules which generate the desired response can be obtained by changing the portion of the error-rate in the cost funtion. In SISO(Single-Input Single- Output)plant, only by the learning delay, it is possible to experss the plant model and to get the desired control rules. In the long run, this algorithm gives us the good control rules with a minimal amount of prior informaiton about the environment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.128-129
• /
• 2015

Domestic construction industry has seen a negative image in the sense that various accident occurs frequently. Status of construction accidents in the case of domestic workers is reduced. However, if the situation of foreign workers is increasing every year. This study aims to create high-temperature exposure standard table for foreign workers and domestic workers in the analysis through the discomfort index of fatalities and using the WBGT index for reducing fatalities foreign workers to improve the image of the construction industry.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.2
• /
• pp.3-10
• /
• 2018

Damage location and extent of structure could be detected by the inverse analysis on dynamic response properties such as frequencies and mode shapes. In practice the measured difference of natural frequencies represent the stiffness change reliably, however the measured mode shape is insensitive for stiffness change, but provides spatial information of damage. The damage detection index on shear building structures is formulated in this study. The damage detection index could be estimated from mode shape and srory stiffness of undamaged structure and frequency difference between undamaged and damaged structure. For the verification of the observed damage detection method, the numerical analysis of Matlab and MIDAS and shacking table test were performed. In results, the damage index of damaged story was estimated so higher than undamaged stories that indicates the damaged story apparently.